Xilinx Inc.
Bild kan vara representation.
Se specifikationer för produktinformation.
XC2C384-10FT256C
Visa detalj Datablad

XC2C384-10FT256C

Product Overview

Category

The XC2C384-10FT256C belongs to the category of complex programmable logic devices (CPLDs).

Use

It is used for implementing high-performance, low-cost, and low-power system designs.

Characteristics

  • Low power consumption
  • High performance
  • Flexible logic architecture
  • In-system programmability

Package

The XC2C384-10FT256C is available in a 256-pin Fine-pitch Thin Quad Flat Pack (FT256) package.

Essence

The essence of XC2C384-10FT256C lies in its ability to provide a versatile and efficient platform for logic implementation in various electronic systems.

Packaging/Quantity

The XC2C384-10FT256C is typically packaged individually and is available in varying quantities based on customer requirements.

Specifications

  • Logic Cells: 384
  • Maximum Frequency: 300 MHz
  • Operating Voltage: 1.5V to 1.8V
  • I/O Pins: 208
  • Operating Temperature: -40°C to 100°C

Detailed Pin Configuration

The detailed pin configuration of XC2C384-10FT256C can be found in the manufacturer's datasheet.

Functional Features

  • In-system programmability
  • Fast propagation delay
  • Wide operating voltage range
  • Flexible I/O options

Advantages and Disadvantages

Advantages

  • Low power consumption
  • High logic cell count
  • Versatile I/O options

Disadvantages

  • Limited memory resources
  • Relatively smaller package size compared to other CPLDs

Working Principles

The XC2C384-10FT256C operates based on the principles of configurable logic blocks, interconnect resources, and I/O elements to implement custom logic functions.

Detailed Application Field Plans

The XC2C384-10FT256C is well-suited for applications such as: - Industrial control systems - Communication equipment - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to XC2C384-10FT256C include: - XC2C256-7FTG256C - XC2C512-7FTG256C - XC2C768-7FTG256C

In conclusion, the XC2C384-10FT256C CPLD offers a balance of performance, flexibility, and low power consumption, making it an ideal choice for various electronic system designs.

[Word Count: 345]

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av XC2C384-10FT256C i tekniska lösningar

  1. What is XC2C384-10FT256C?

    • The XC2C384-10FT256C is a CoolRunner-II CPLD (Complex Programmable Logic Device) from Xilinx, featuring 384 macrocells and operating at a speed grade of -10.

  2. What are the typical applications of XC2C384-10FT256C?

    • It is commonly used in applications such as industrial control, consumer electronics, communication systems, and automotive electronics.

  3. What are the key features of XC2C384-10FT256C?

    • Some key features include low power consumption, high-speed operation, reprogrammability, and non-volatile configuration memory.

  4. How does XC2C384-10FT256C compare to other CPLDs in its class?

    • It offers a good balance of logic capacity, speed, and power consumption, making it suitable for a wide range of applications.

  5. What development tools are available for programming XC2C384-10FT256C?

    • Xilinx provides various development tools such as ISE Design Suite and CoolRunner-II Starter Kit for designing and programming the XC2C384-10FT256C.

  6. Can XC2C384-10FT256C be used in battery-powered devices?

    • Yes, it is well-suited for battery-powered devices due to its low power consumption characteristics.

  7. What are the typical voltage and temperature operating ranges for XC2C384-10FT256C?

    • It typically operates at voltages ranging from 1.8V to 3.3V and over a temperature range of -40°C to 85°C.

  8. Are there any known limitations or constraints when using XC2C384-10FT256C in a design?

    • While it offers a good balance of features, designers should consider its specific I/O capabilities, timing constraints, and pinout compatibility with other components in the system.

  9. Can XC2C384-10FT256C be used in safety-critical applications?

    • It can be used in safety-critical applications, but designers need to ensure that the design meets the necessary safety standards and requirements.

  10. Where can I find detailed technical documentation and support for XC2C384-10FT256C?

    • Detailed technical documentation, application notes, and support resources are available on the Xilinx website and through their customer support channels.