Vishay Siliconix
Bild kan vara representation.
Se specifikationer för produktinformation.
2N4117A-E3
Visa detalj Datablad

2N4117A-E3

Product Overview

Category

The 2N4117A-E3 belongs to the category of field-effect transistors (FETs).

Use

It is commonly used as a switching device in electronic circuits.

Characteristics

  • Low power consumption
  • High input impedance
  • Fast switching speed

Package

The 2N4117A-E3 is typically available in TO-92 packaging.

Essence

This FET serves as a crucial component in electronic devices, enabling efficient signal switching and amplification.

Packaging/Quantity

The 2N4117A-E3 is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Drain-Source Voltage (VDS): 30V
  • Gate-Source Voltage (VGS): ±20V
  • Drain Current (ID): 200mA
  • Power Dissipation (PD): 350mW
  • Operating Temperature Range: -55°C to +150°C

Detailed Pin Configuration

The 2N4117A-E3 features three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • High input impedance allows for minimal loading of preceding stages.
  • Fast switching speed enables rapid response in electronic circuits.

Advantages

  • Low power consumption makes it suitable for battery-operated devices.
  • High input impedance minimizes signal distortion.

Disadvantages

  • Limited maximum drain current may restrict its use in high-power applications.
  • Sensitivity to electrostatic discharge (ESD) requires careful handling during assembly.

Working Principles

The 2N4117A-E3 operates based on the control of current flow between the drain and source terminals through the application of voltage at the gate terminal. This control mechanism allows for efficient signal switching and amplification.

Detailed Application Field Plans

The 2N4117A-E3 finds extensive use in various applications, including: - Audio amplifiers - Signal switching circuits - Sensor interfaces - Oscillator circuits

Detailed and Complete Alternative Models

Some alternative models to the 2N4117A-E3 include: - J310 - BF256B - MPF102

In summary, the 2N4117A-E3 field-effect transistor offers high input impedance, low power consumption, and fast switching speed, making it suitable for a wide range of electronic applications. However, its limited maximum drain current and sensitivity to ESD should be considered when selecting it for specific circuit designs. Alternative models such as the J310, BF256B, and MPF102 provide similar functionality and can be considered based on specific project requirements.

[Word Count: 387]

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av 2N4117A-E3 i tekniska lösningar

Sure, here are 10 common questions and answers related to the application of 2N4117A-E3 in technical solutions:

  1. What is the 2N4117A-E3 transistor used for?

    • The 2N4117A-E3 is a JFET (junction field-effect transistor) commonly used for low-frequency amplification and switching applications.

  2. What are the key features of the 2N4117A-E3 transistor?

    • The 2N4117A-E3 features low noise, high input impedance, and low power consumption, making it suitable for various signal processing applications.

  3. What is the maximum voltage and current rating for the 2N4117A-E3?

    • The maximum voltage rating is typically around 30V, and the maximum current rating is approximately 50mA.

  4. How can the 2N4117A-E3 be used in amplifier circuits?

    • The 2N4117A-E3 can be used as a voltage-controlled resistor in amplifier circuits, providing variable gain control.

  5. Can the 2N4117A-E3 be used for analog switch applications?

    • Yes, the 2N4117A-E3 can be used as an analog switch due to its ability to control the flow of current between its source and drain terminals.

  6. What are some typical applications of the 2N4117A-E3 in audio systems?

    • The 2N4117A-E3 can be used in audio preamplifiers, tone control circuits, and audio mixers due to its low noise and high input impedance characteristics.

  7. How does temperature affect the performance of the 2N4117A-E3?

    • The 2N4117A-E3 exhibits stable performance over a wide temperature range, making it suitable for use in environments with varying temperatures.

  8. What are the recommended operating conditions for the 2N4117A-E3?

    • The 2N4117A-E3 is typically operated within a temperature range of -55°C to 150°C and at a maximum power dissipation of around 350mW.

  9. Can the 2N4117A-E3 be used in low-power sensor interfaces?

    • Yes, the 2N4117A-E3 can be used in low-power sensor interfaces due to its low power consumption and high input impedance, making it suitable for signal conditioning.

  10. Are there any specific considerations for designing circuits with the 2N4117A-E3?

    • When designing circuits with the 2N4117A-E3, it's important to consider proper biasing and matching of input and output impedances to optimize its performance in the intended application.