Vishay Semiconductor Diodes Division
Bild kan vara representation.
Se specifikationer för produktinformation.
SS16-004HE3_A/I
Visa detalj Datablad

SS16-004HE3_A/I

Product Overview

Category: Diode
Use: Rectification and voltage regulation
Characteristics: High efficiency, low forward voltage drop
Package: SOD-123
Essence: Schottky diode
Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Forward Voltage: 0.35V
  • Reverse Voltage: 40V
  • Forward Current: 1A
  • Reverse Leakage Current: 5µA

Detailed Pin Configuration

The SS16-004HE3_A/I has two pins, the anode and the cathode. The anode is connected to the positive terminal of the circuit, while the cathode is connected to the negative terminal.

Functional Features

  • Low forward voltage drop ensures minimal power loss
  • Fast switching speed for high-frequency applications
  • High temperature operation up to 125°C

Advantages and Disadvantages

Advantages: - High efficiency - Fast response time - Small form factor

Disadvantages: - Limited reverse voltage tolerance - Higher cost compared to standard diodes

Working Principles

The SS16-004HE3_A/I operates based on the Schottky barrier principle, where a metal-semiconductor junction is formed, resulting in low forward voltage drop and fast switching characteristics.

Detailed Application Field Plans

This diode is suitable for various applications including: - Switching power supplies - Voltage clamping - Reverse polarity protection - DC-DC converters

Detailed and Complete Alternative Models

  • 1N5819: Similar specifications and package
  • BAT54S: Dual diode with similar characteristics
  • SB140: Higher current rating alternative

Note: The above information is for reference purposes only. Always refer to the manufacturer's datasheet for accurate details.

Word count: 294

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av SS16-004HE3_A/I i tekniska lösningar

  1. What is SS16-004HE3_A/I?

    • SS16-004HE3_A/I is a Schottky diode, commonly used in electronic circuits for its low forward voltage drop and fast switching capabilities.

  2. What are the typical applications of SS16-004HE3_A/I?

    • It is commonly used in power supply circuits, voltage clamping, reverse polarity protection, and signal demodulation.

  3. What is the maximum forward voltage of SS16-004HE3_A/I?

    • The maximum forward voltage of SS16-004HE3_A/I is typically around 0.5V at a forward current of 1A.

  4. What is the reverse leakage current of SS16-004HE3_A/I?

    • The reverse leakage current is typically very low, around a few microamps at the rated voltage.

  5. Can SS16-004HE3_A/I handle high-frequency signals?

    • Yes, SS16-004HE3_A/I is suitable for high-frequency applications due to its fast switching characteristics.

  6. What is the maximum operating temperature of SS16-004HE3_A/I?

    • The maximum operating temperature is typically around 125°C, making it suitable for a wide range of environments.

  7. Is SS16-004HE3_A/I suitable for automotive applications?

    • Yes, SS16-004HE3_A/I is often used in automotive electronics due to its reliability and performance under harsh conditions.

  8. Does SS16-004HE3_A/I require a heat sink for high-power applications?

    • For high-power applications, a heat sink may be necessary to dissipate heat effectively and ensure optimal performance.

  9. What are the key advantages of using SS16-004HE3_A/I in technical solutions?

    • Some key advantages include low forward voltage drop, fast switching speed, low reverse leakage current, and suitability for high-frequency applications.

  10. Are there any common failure modes or issues associated with SS16-004HE3_A/I?

    • Common issues may include thermal runaway at high temperatures or excessive reverse voltage leading to breakdown, so proper design considerations are important to prevent these issues.