Vishay Semiconductor Diodes Division
Bild kan vara representation.
Se specifikationer för produktinformation.
MBR2045CT-1
Visa detalj Datablad

MBR2045CT-1

Introduction

The MBR2045CT-1 is a diode belonging to the category of Schottky rectifier diodes. This diode is commonly used in power supply and voltage regulation applications due to its unique characteristics, packaging, and quantity.

Basic Information Overview

  • Category: Schottky rectifier diode
  • Use: Power supply and voltage regulation
  • Characteristics: High current capability, low forward voltage drop
  • Package: TO-220AB
  • Essence: Efficient power conversion
  • Packaging/Quantity: Typically packaged in reels of 1000 units

Specifications

  • Voltage Rating: 45V
  • Current Rating: 20A
  • Forward Voltage Drop: 0.55V at 10A
  • Reverse Leakage Current: 50μA
  • Operating Temperature Range: -65°C to 175°C

Detailed Pin Configuration

The MBR2045CT-1 has a standard TO-220AB package with three pins: 1. Anode (A) 2. Cathode (K) 3. Thermal pad (T)

Functional Features

  • High current capability for efficient power handling
  • Low forward voltage drop leading to minimal power loss
  • Fast switching speed for rapid response in power regulation

Advantages and Disadvantages

Advantages

  • High current rating allows for robust power handling
  • Low forward voltage drop results in energy-efficient operation
  • Fast switching speed enables quick response in power regulation

Disadvantages

  • Higher reverse leakage current compared to some alternative models
  • Limited voltage rating compared to higher-power diodes

Working Principles

The MBR2045CT-1 operates based on the Schottky barrier principle, where the metal-semiconductor junction provides low forward voltage drop and fast switching characteristics. When forward-biased, the diode allows current flow with minimal voltage drop, making it suitable for power conversion applications.

Detailed Application Field Plans

The MBR2045CT-1 is widely used in the following applications: - Switching power supplies - DC-DC converters - Voltage regulators - Rectifiers in automotive electronics

Detailed and Complete Alternative Models

Some alternative models to the MBR2045CT-1 include: - MBR3045CT-1: Higher voltage rating (30V) for specific applications - MBR4045CT-1: Higher current rating (40A) for increased power handling - MBR1060CT-1: Lower voltage rating (10V) for lower-power applications

In conclusion, the MBR2045CT-1 Schottky rectifier diode offers high current capability, low forward voltage drop, and fast switching speed, making it an ideal choice for power supply and voltage regulation applications. Its specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models provide a comprehensive understanding of its capabilities and potential use cases.

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av MBR2045CT-1 i tekniska lösningar

  1. What is MBR2045CT-1?

    • MBR2045CT-1 is a Schottky diode rectifier designed for high frequency and high voltage applications.

  2. What are the key features of MBR2045CT-1?

    • The key features include a low forward voltage drop, high current capability, and fast switching speed.

  3. What are the typical applications of MBR2045CT-1?

    • Typical applications include switch mode power supplies, freewheeling diodes, and polarity protection diodes in various technical solutions.

  4. What is the maximum forward voltage of MBR2045CT-1?

    • The maximum forward voltage is typically around 0.85V at a forward current of 10A.

  5. What is the reverse recovery time of MBR2045CT-1?

    • The reverse recovery time is typically around 35ns.

  6. What is the maximum repetitive peak reverse voltage of MBR2045CT-1?

    • The maximum repetitive peak reverse voltage is 45V.

  7. Can MBR2045CT-1 be used in high frequency applications?

    • Yes, MBR2045CT-1 is specifically designed for high frequency applications.

  8. What is the operating temperature range of MBR2045CT-1?

    • The operating temperature range is typically -65°C to +175°C.

  9. Is MBR2045CT-1 RoHS compliant?

    • Yes, MBR2045CT-1 is RoHS compliant, making it suitable for environmentally friendly designs.

  10. Are there any recommended layout considerations when using MBR2045CT-1?

    • It is recommended to minimize the loop area and keep the diode close to the switching device to reduce parasitic inductance and improve performance.