Vishay Semiconductor Diodes Division
Bild kan vara representation.
Se specifikationer för produktinformation.
IRKC236/16
Visa detalj Datablad

IRKC236/16

Product Overview

Category: Power Semiconductor
Use: High-power rectifier module
Characteristics: High voltage, high current, fast switching
Package: Module
Essence: Silicon controlled rectifier (SCR)
Packaging/Quantity: Single unit

Specifications

  • Voltage: 1600V
  • Current: 236A
  • Weight: 200g
  • Dimensions: 50mm x 100mm x 20mm

Detailed Pin Configuration

  1. Anode
  2. Cathode
  3. Gate

Functional Features

  • High voltage capability
  • Fast switching speed
  • Low on-state voltage drop

Advantages

  • Suitable for high-power applications
  • Reliable and durable
  • Fast response time

Disadvantages

  • Requires careful handling due to high voltage
  • May require complex cooling systems for high-power applications

Working Principles

The IRKC236/16 is a silicon controlled rectifier (SCR) that controls the flow of electric current by using a gate signal to trigger conduction. When the gate signal is applied, the SCR allows current to flow from the anode to the cathode until the current drops below a certain level.

Detailed Application Field Plans

The IRKC236/16 is commonly used in high-power industrial applications such as: - Motor drives - Welding equipment - Power supplies - Battery chargers

Detailed and Complete Alternative Models

  • IRKC236/12
  • IRKC236/20
  • IRKC300/16

This information provides a comprehensive overview of the IRKC236/16, covering its product details, specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av IRKC236/16 i tekniska lösningar

  1. What is IRKC236/16?

    • IRKC236/16 is a specific model of power semiconductor module commonly used in industrial applications.

  2. What are the key features of IRKC236/16?

    • The key features of IRKC236/16 include high power density, low thermal resistance, and high reliability.

  3. What are the typical technical specifications of IRKC236/16?

    • The typical technical specifications of IRKC236/16 include a voltage rating of 1600V, a current rating of 236A, and a weight of 450g.

  4. How is IRKC236/16 typically used in technical solutions?

    • IRKC236/16 is commonly used in motor drives, power supplies, and renewable energy systems for its high power handling capabilities.

  5. What are the recommended cooling methods for IRKC236/16?

    • Recommended cooling methods for IRKC236/16 include forced air cooling, heat sinks, and liquid cooling systems to maintain optimal operating temperatures.

  6. Are there any specific mounting considerations for IRKC236/16?

    • Yes, it is important to ensure proper insulation and secure mounting to dissipate heat effectively and prevent electrical shorts.

  7. What are the common protection measures for IRKC236/16 in technical solutions?

    • Common protection measures include overcurrent protection, overvoltage protection, and temperature monitoring to prevent damage to the module.

  8. Can IRKC236/16 be used in parallel configurations for higher power applications?

    • Yes, IRKC236/16 can be used in parallel configurations to increase power handling capacity in larger technical solutions.

  9. What are the typical failure modes of IRKC236/16 and how can they be mitigated?

    • Typical failure modes include thermal runaway and voltage spikes, which can be mitigated through proper thermal management and robust circuit design.

  10. Where can I find detailed application notes and technical resources for IRKC236/16?

    • Detailed application notes and technical resources for IRKC236/16 can be found on the manufacturer's website or through authorized distributors.