Vishay BC Components
Bild kan vara representation.
Se specifikationer för produktinformation.
NTCLE203E3502FB0
Visa detalj Datablad

NTCLE203E3502FB0

Product Overview

Category

The NTCLE203E3502FB0 belongs to the category of NTC thermistors.

Use

It is commonly used for temperature sensing and control applications.

Characteristics

  • High sensitivity to temperature changes
  • Wide operating temperature range
  • Small size for easy integration into electronic systems

Package

The NTCLE203E3502FB0 is typically available in a small, surface-mount package.

Essence

This thermistor is essential for precise temperature measurement and regulation in various electronic devices and systems.

Packaging/Quantity

It is usually supplied in reels containing a specific quantity, such as 1000 units per reel.

Specifications

  • Resistance at 25°C: 35 kΩ
  • B-value: 3500 K
  • Maximum Operating Temperature: 150°C
  • Tolerance: ±1%

Detailed Pin Configuration

The NTCLE203E3502FB0 typically has two pins for connection to the circuit. The pinout configuration is as follows: 1. Pin 1: Connection point for one end of the thermistor 2. Pin 2: Connection point for the other end of the thermistor

Functional Features

  • Non-linear resistance characteristic with respect to temperature
  • Precise and reliable temperature measurement
  • Suitable for use in a wide range of environmental conditions

Advantages

  • High sensitivity enables accurate temperature monitoring
  • Compact size allows for easy integration into electronic designs
  • Wide operating temperature range enhances versatility

Disadvantages

  • Non-linear response may require additional calibration in some applications
  • Limited precision compared to other temperature sensing technologies in certain scenarios

Working Principles

The NTCLE203E3502FB0 operates based on the principle of negative temperature coefficient (NTC), where its resistance decreases as the temperature increases. This characteristic makes it suitable for temperature measurement and control applications.

Detailed Application Field Plans

The NTCLE203E3502FB0 is widely used in various applications, including: - Consumer electronics for temperature monitoring and protection - Automotive systems for climate control and thermal management - Industrial equipment for process temperature control - Medical devices for temperature sensing and regulation

Detailed and Complete Alternative Models

Some alternative models to the NTCLE203E3502FB0 include: - NTCLE100E3103JB0: Similar characteristics with a different resistance value - NTCLE413E2103F520L: Higher precision and tighter tolerance for critical applications - NTCLE203E3472FB0: Lower resistance at 25°C for specific design requirements

In conclusion, the NTCLE203E3502FB0 NTC thermistor offers high sensitivity and reliability for temperature sensing and control applications across various industries.

[Word count: 398]

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av NTCLE203E3502FB0 i tekniska lösningar

  1. What is the NTCLE203E3502FB0 temperature sensor used for?

    • The NTCLE203E3502FB0 is a temperature sensor commonly used in technical solutions to measure and monitor temperature changes in various applications.

  2. What is the temperature range of the NTCLE203E3502FB0?

    • The NTCLE203E3502FB0 has a temperature range of -40°C to 125°C, making it suitable for a wide range of temperature monitoring applications.

  3. How accurate is the NTCLE203E3502FB0 temperature sensor?

    • The NTCLE203E3502FB0 offers high accuracy in temperature measurement, with typical tolerances of around ±1°C.

  4. What are the typical applications for the NTCLE203E3502FB0?

    • Common applications for the NTCLE203E3502FB0 include temperature monitoring in industrial equipment, HVAC systems, automotive applications, and consumer electronics.

  5. How does the NTCLE203E3502FB0 interface with microcontrollers or data acquisition systems?

    • The NTCLE203E3502FB0 can be interfaced with microcontrollers or data acquisition systems using analog voltage output or digital communication protocols such as I2C or SPI.

  6. What is the power consumption of the NTCLE203E3502FB0?

    • The NTCLE203E3502FB0 has low power consumption, making it suitable for battery-powered applications.

  7. Can the NTCLE203E3502FB0 be used in harsh environments?

    • Yes, the NTCLE203E3502FB0 is designed to withstand harsh environmental conditions, including high humidity and vibration.

  8. Is calibration required for the NTCLE203E3502FB0?

    • The NTCLE203E3502FB0 may require calibration to ensure accurate temperature measurements, especially in critical applications.

  9. What is the response time of the NTCLE203E3502FB0?

    • The NTCLE203E3502FB0 has a fast response time, allowing it to quickly detect and respond to temperature changes.

  10. Are there any special considerations for PCB layout when using the NTCLE203E3502FB0?

    • Proper PCB layout techniques should be followed to minimize noise and ensure accurate temperature readings when using the NTCLE203E3502FB0.