XC6124E633MR-G

Product Overview

Category

XC6124E633MR-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

• Package: The XC6124E633MR-G comes in a small SOT-25 package.
• Essence: This voltage regulator is designed to provide stable and regulated output voltage.
• Packaging/Quantity: It is typically sold in reels or tubes, with a quantity of 3000 units per reel.

Specifications

The specifications of XC6124E633MR-G are as follows:

• Input Voltage Range: 2.5V to 6.0V
• Output Voltage: 3.3V
• Maximum Output Current: 150mA
• Dropout Voltage: 200mV (at 100mA)
• Quiescent Current: 40µA (typical)

Detailed Pin Configuration

The XC6124E633MR-G has three pins:

1. VIN: Input voltage pin
2. VOUT: Output voltage pin
3. GND: Ground pin

Functional Features

• Low dropout voltage: The XC6124E633MR-G exhibits a low dropout voltage, ensuring efficient regulation even when the input voltage is close to the desired output voltage.
• Low quiescent current: With a typical quiescent current of only 40µA, this voltage regulator minimizes power consumption in standby or idle modes.
• Short-circuit protection: The device incorporates short-circuit protection, safeguarding the circuit from damage in case of a fault.

Advantages and Disadvantages

Advantages

• Small package size allows for space-saving designs.
• Low dropout voltage ensures efficient voltage regulation.
• Low quiescent current reduces power consumption.
• Short-circuit protection enhances circuit reliability.

Disadvantages

• Limited maximum output current of 150mA may not be suitable for high-power applications.
• Input voltage range is restricted to 2.5V to 6.0V.

Working Principles

The XC6124E633MR-G operates based on the principle of a linear voltage regulator. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. This ensures that the output voltage remains stable even when the input voltage fluctuates.

Detailed Application Field Plans

The XC6124E633MR-G can be used in various electronic applications, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to XC6124E633MR-G are: - XC6206P332MR: Similar voltage regulator with a fixed output voltage of 3.3V and a maximum output current of 200mA. - LM1117MPX-3.3/NOPB: Voltage regulator with a fixed output voltage of 3.3V and a maximum output current of 800mA. - MCP1700T-3302E/TT: Low dropout voltage regulator with a fixed output voltage of 3.3V and a maximum output current of 250mA.

These alternative models offer similar functionality and can be considered as substitutes depending on specific requirements.

In conclusion, the XC6124E633MR-G is a voltage regulator that provides stable and regulated output voltage. With its small package size, low dropout voltage, and low quiescent current, it offers advantages in space-saving designs and power efficiency. However, its limited maximum output current and input voltage range should be taken into consideration for specific applications.