Torex Semiconductor Ltd
Bild kan vara representation.
Se specifikationer för produktinformation.
XC6124E534MR-G
Visa detalj Datablad

XC6124E534MR-G

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Regulator
  • Characteristics: Low Dropout, Low Noise, High Accuracy
  • Package: SOT-23-5
  • Essence: Regulates voltage to ensure stable power supply
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.0V
  • Output Current: 150mA
  • Dropout Voltage: 200mV @ 100mA
  • Quiescent Current: 50μA
  • Ripple Rejection Ratio: 70dB @ 1kHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The XC6124E534MR-G has a total of 5 pins:

  1. VIN - Input Voltage Pin
  2. GND - Ground Pin
  3. EN - Enable Pin
  4. FB - Feedback Pin
  5. VOUT - Output Voltage Pin

Functional Features

  • Low dropout voltage ensures efficient power conversion.
  • Low noise output for sensitive applications.
  • High accuracy in regulating output voltage.
  • Enable pin allows for easy on/off control.
  • Thermal shutdown protection prevents overheating.

Advantages and Disadvantages

Advantages

  • Compact SOT-23-5 package saves board space.
  • Wide input voltage range accommodates various power sources.
  • Low quiescent current minimizes power consumption.
  • Excellent ripple rejection ratio ensures clean output.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may affect performance in low input voltage scenarios.

Working Principles

The XC6124E534MR-G is a voltage regulator IC that maintains a stable output voltage regardless of fluctuations in the input voltage. It achieves this by comparing the feedback voltage (FB) with a reference voltage and adjusting the pass transistor accordingly. The enable pin (EN) allows for easy control of the regulator's operation.

Detailed Application Field Plans

The XC6124E534MR-G is commonly used in various electronic devices and systems, including:

  1. Battery-powered devices: Portable audio players, handheld gaming consoles.
  2. Mobile devices: Smartphones, tablets, wearable devices.
  3. IoT applications: Sensors, smart home devices, wireless modules.
  4. Automotive electronics: Infotainment systems, navigation units, lighting controls.
  5. Industrial equipment: Measurement instruments, control systems, motor drives.

Detailed and Complete Alternative Models

  1. XC6206P332MR-G: 3.3V Output Voltage, 200mA Output Current, SOT-23-5 Package.
  2. XC6219B182MR-G: 1.8V Output Voltage, 150mA Output Current, SOT-23-5 Package.
  3. XC6220C502MR-G: 5.0V Output Voltage, 500mA Output Current, SOT-23-5 Package.
  4. XC6230D332MR-G: 3.3V Output Voltage, 300mA Output Current, SOT-23-5 Package.
  5. XC6240B052MR-G: 0.52V Output Voltage, 400mA Output Current, SOT-23-5 Package.

These alternative models offer different output voltages and current capabilities to suit specific application requirements.

In conclusion, the XC6124E534MR-G is a voltage regulator IC designed for stable power supply in various electronic devices. Its low dropout, low noise, and high accuracy characteristics make it suitable for a wide range of applications. However, its limited output current and dropout voltage should be considered when selecting the appropriate model.

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av XC6124E534MR-G i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of XC6124E534MR-G in technical solutions:

  1. Question: What is XC6124E534MR-G?
    - Answer: XC6124E534MR-G is a specific model of voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.

  2. Question: What is the operating voltage range of XC6124E534MR-G?
    - Answer: The operating voltage range of XC6124E534MR-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6124E534MR-G work?
    - Answer: XC6124E534MR-G works by comparing the input voltage with a reference voltage. When the input voltage drops below the reference voltage, it triggers an internal circuit that generates an output signal.

  4. Question: What is the output signal of XC6124E534MR-G?
    - Answer: The output signal of XC6124E534MR-G is an open-drain output, which means it can be connected to other devices or circuits for further processing.

  5. Question: What is the typical quiescent current consumption of XC6124E534MR-G?
    - Answer: The typical quiescent current consumption of XC6124E534MR-G is very low, usually around 1.0µA.

  6. Question: Can XC6124E534MR-G be used in battery-powered applications?
    - Answer: Yes, XC6124E534MR-G is suitable for battery-powered applications due to its low quiescent current consumption.

  7. Question: What is the hysteresis voltage of XC6124E534MR-G?
    - Answer: The hysteresis voltage of XC6124E534MR-G is typically 0.1V, which helps to prevent false triggering caused by voltage fluctuations or noise.

  8. Question: Can XC6124E534MR-G be used in automotive applications?
    - Answer: Yes, XC6124E534MR-G is designed to meet the requirements of automotive applications and can operate within the specified temperature range.

  9. Question: What is the package type of XC6124E534MR-G?
    - Answer: XC6124E534MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.

  10. Question: Are there any application notes or reference designs available for XC6124E534MR-G?
    - Answer: Yes, Torex Semiconductor provides application notes and reference designs that can help engineers integrate XC6124E534MR-G into their technical solutions effectively.

Please note that the answers provided here are general and may vary depending on the specific requirements and datasheet of XC6124E534MR-G.