XC6124D745MR-G

Product Overview

Use

It is used to regulate and stabilize voltage in electronic circuits.

Characteristics

Input Voltage Range: 2.5V to 6.0V
Output Voltage: 0.8V to 5.0V
Maximum Output Current: 150mA
Low Dropout Voltage: 200mV (at 100mA)
Low Quiescent Current: 30µA (typical)
Package Type: SOT-25
Essence: Linear voltage regulator

Packaging/Quantity

XC6124D745MR-G is available in a SOT-25 package. The quantity per package may vary depending on the supplier.

Specifications

Input Voltage Range: 2.5V to 6.0V
Output Voltage Range: 0.8V to 5.0V
Output Current: Up to 150mA
Dropout Voltage: 200mV (at 100mA)
Quiescent Current: 30µA (typical)
Operating Temperature Range: -40°C to +85°C
Package Type: SOT-25

Detailed Pin Configuration

XC6124D745MR-G has the following pin configuration:

VIN: Input voltage pin
GND: Ground pin
VOUT: Output voltage pin

Functional Features

Voltage regulation: XC6124D745MR-G provides a stable output voltage regardless of input voltage fluctuations.
Low dropout voltage: It maintains a low voltage drop between the input and output, ensuring efficient power conversion.
Low quiescent current: The regulator consumes minimal current when no load is connected, reducing power consumption.

Advantages and Disadvantages

Advantages

Wide input voltage range allows for flexibility in various applications.
Low dropout voltage ensures efficient power conversion.
Small package size (SOT-25) enables space-saving designs.
Low quiescent current minimizes power consumption.

Disadvantages

Limited maximum output current of 150mA may not be suitable for high-power applications.
Output voltage range is limited to 0.8V to 5.0V.

Working Principles

XC6124D745MR-G operates based on the principle of linear voltage regulation. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. This ensures that the output voltage remains stable even when the input voltage varies.

Detailed Application Field Plans

XC6124D745MR-G can be used in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to XC6124D745MR-G include: - XC6124C745MR-G: Similar specifications, but with a different package type (SOT-89) - XC6124D745NR-G: Same specifications, but without the low dropout voltage feature - XC6124E745MR-G: Higher maximum output current (300mA), but with a slightly higher dropout voltage

These alternative models provide options based on specific requirements and design constraints.

Word count: 345 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av XC6124D745MR-G i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of XC6124D745MR-G in technical solutions:

Question: What is XC6124D745MR-G?
- Answer: XC6124D745MR-G is a voltage detector IC manufactured by Torex Semiconductor. It is used to monitor the power supply voltage and provide a reset signal when the voltage falls below a certain threshold.
Question: What is the operating voltage range of XC6124D745MR-G?
- Answer: The operating voltage range of XC6124D745MR-G is from 0.8V to 6.0V.
Question: What is the typical quiescent current consumption of XC6124D745MR-G?
- Answer: The typical quiescent current consumption of XC6124D745MR-G is 1.0µA.
Question: How does XC6124D745MR-G detect the voltage level?
- Answer: XC6124D745MR-G uses an internal voltage reference and a comparator to compare the input voltage with a preset threshold.
Question: Can XC6124D745MR-G be used in battery-powered applications?
- Answer: Yes, XC6124D745MR-G can be used in battery-powered applications as it has low quiescent current consumption and a wide operating voltage range.
Question: What is the output type of XC6124D745MR-G?
- Answer: XC6124D745MR-G has an open-drain output type.
Question: What is the maximum output sink current of XC6124D745MR-G?
- Answer: The maximum output sink current of XC6124D745MR-G is 50mA.
Question: Can XC6124D745MR-G be used for overvoltage protection?
- Answer: No, XC6124D745MR-G is specifically designed for undervoltage detection and does not provide overvoltage protection.
Question: What is the typical response time of XC6124D745MR-G?
- Answer: The typical response time of XC6124D745MR-G is 200µs.
Question: Is XC6124D745MR-G available in different package options?
- Answer: Yes, XC6124D745MR-G is available in a SOT-25 package.

Please note that these answers are based on general information about XC6124D745MR-G and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed technical specifications and guidelines.