Torex Semiconductor Ltd
Bild kan vara representation.
Se specifikationer för produktinformation.
XC6124C538MR-G
Visa detalj Datablad

XC6124C538MR-G

Product Overview

Category

XC6124C538MR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation: XC6124C538MR-G ensures a stable output voltage regardless of input fluctuations.
  • Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
  • Low quiescent current: The regulator consumes minimal current when no load is connected.
  • Thermal shutdown protection: It automatically shuts down to prevent damage due to excessive heat.
  • Short-circuit protection: It safeguards against short-circuits, preventing damage to the circuitry.

Package

XC6124C538MR-G comes in a small surface-mount package.

Essence

The essence of XC6124C538MR-G lies in its ability to provide reliable and stable voltage regulation for electronic devices.

Packaging/Quantity

It is typically available in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input voltage range: 2.5V - 6.0V
  • Output voltage: 3.3V
  • Maximum output current: 150mA
  • Dropout voltage: 200mV (at 100mA)
  • Quiescent current: 30µA (typical)
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

XC6124C538MR-G has the following pin configuration:

  1. VIN (Input voltage)
  2. GND (Ground)
  3. VOUT (Output voltage)

Functional Features

  • Voltage regulation: Maintains a constant output voltage despite variations in input voltage.
  • Low dropout voltage: Operates efficiently even when the input voltage is close to the desired output voltage.
  • Low quiescent current: Consumes minimal current when no load is connected.
  • Thermal shutdown protection: Automatically shuts down to prevent damage due to excessive heat.
  • Short-circuit protection: Safeguards against short-circuits, protecting the circuitry.

Advantages and Disadvantages

Advantages

  • Stable output voltage regulation
  • Low dropout voltage ensures efficient operation
  • Minimal quiescent current consumption
  • Protection against thermal shutdown and short-circuits

Disadvantages

  • Limited maximum output current (150mA)
  • Narrow input voltage range (2.5V - 6.0V)

Working Principles

XC6124C538MR-G utilizes internal circuitry to compare the output voltage with a reference voltage. It adjusts the pass transistor's resistance to maintain a constant output voltage. The regulator continuously monitors the input voltage and adjusts its operation accordingly to provide stable voltage regulation.

Detailed Application Field Plans

XC6124C538MR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Embedded systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124C538MR-G are: - LM1117-3.3 - MCP1700-3302E/TO - TS2937CP-3.3

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 431 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av XC6124C538MR-G i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of XC6124C538MR-G in technical solutions:

  1. Question: What is XC6124C538MR-G?
    - Answer: XC6124C538MR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6124C538MR-G?
    - Answer: The operating voltage range of XC6124C538MR-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6124C538MR-G help in technical solutions?
    - Answer: XC6124C538MR-G helps in technical solutions by ensuring proper operation of electronic devices by monitoring the power supply voltage and providing a reset signal when necessary.

  4. Question: Can XC6124C538MR-G be used in battery-powered applications?
    - Answer: Yes, XC6124C538MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0μA.

  5. Question: What is the typical reset threshold voltage of XC6124C538MR-G?
    - Answer: The typical reset threshold voltage of XC6124C538MR-G is 5.38V.

  6. Question: Is XC6124C538MR-G suitable for automotive applications?
    - Answer: Yes, XC6124C538MR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  7. Question: Does XC6124C538MR-G have built-in hysteresis?
    - Answer: Yes, XC6124C538MR-G has built-in hysteresis of typically 100mV, which helps to prevent false triggering due to voltage fluctuations.

  8. Question: Can XC6124C538MR-G be used in industrial control systems?
    - Answer: Yes, XC6124C538MR-G can be used in industrial control systems as it has a wide operating temperature range of -40°C to +105°C.

  9. Question: What is the output type of XC6124C538MR-G?
    - Answer: XC6124C538MR-G has an open-drain output type, which allows for flexibility in connecting to other devices.

  10. Question: Is XC6124C538MR-G available in different package options?
    - Answer: Yes, XC6124C538MR-G is available in a SOT-25 package, which is a small and compact form factor suitable for space-constrained applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.