XC6124C419MR-G
Product Overview
Category
XC6124C419MR-G belongs to the category of voltage regulators.
Use
It is commonly used to regulate and stabilize voltage in electronic circuits.
Characteristics
- Voltage regulation
- Stabilization of output voltage
- Compact size
- Low power consumption
Package
XC6124C419MR-G comes in a small surface-mount package.
Essence
The essence of XC6124C419MR-G lies in its ability to provide stable voltage output for various electronic devices.
Packaging/Quantity
The product is typically packaged in reels, with a quantity of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 1.8V
- Output Current: 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6124C419MR-G has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
Functional Features
- Voltage regulation: The XC6124C419MR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: It incorporates overcurrent protection to prevent damage to connected devices.
- Thermal shutdown: In case of excessive temperature, the regulator shuts down to avoid overheating.
Advantages and Disadvantages
Advantages
- Small form factor allows for easy integration into compact designs.
- Low power consumption helps conserve energy.
- Provides stable voltage output even under varying load conditions.
Disadvantages
- Limited output current capacity may not be suitable for high-power applications.
- Narrow input voltage range restricts compatibility with certain systems.
Working Principles
XC6124C419MR-G operates based on the principle of feedback control. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a constant output voltage.
Detailed Application Field Plans
XC6124C419MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6124C419MR-G are: - XC6206P182MR - LM1117IMPX-1.8/NOPB - MCP1700T-1802E/TT
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.
In conclusion, XC6124C419MR-G is a voltage regulator that provides stable voltage output for electronic devices. Its compact size, low power consumption, and overcurrent protection make it suitable for a wide range of applications. However, its limited output current capacity and narrow input voltage range should be taken into consideration when selecting an alternative model.
Lista 10 Vanliga frågor och svar relaterade till tillämpningen av XC6124C419MR-G i tekniska lösningar
Sure! Here are 10 common questions and answers related to the application of XC6124C419MR-G in technical solutions:
Question: What is XC6124C419MR-G?
Answer: XC6124C419MR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.Question: What is the operating voltage range of XC6124C419MR-G?
Answer: The operating voltage range of XC6124C419MR-G is typically between 0.9V and 6.0V.Question: How does XC6124C419MR-G help in technical solutions?
Answer: XC6124C419MR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level. This ensures proper system initialization and prevents data corruption.Question: What is the output type of XC6124C419MR-G?
Answer: XC6124C419MR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve the desired logic level.Question: What is the typical reset threshold voltage of XC6124C419MR-G?
Answer: The typical reset threshold voltage of XC6124C419MR-G is 4.19V.Question: Can XC6124C419MR-G be used in battery-powered applications?
Answer: Yes, XC6124C419MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA, making it suitable for power-sensitive designs.Question: Does XC6124C419MR-G have any built-in delay for the reset signal?
Answer: Yes, XC6124C419MR-G has a built-in delay of typically 200ms to ensure stable power supply before releasing the reset signal.Question: What is the package type of XC6124C419MR-G?
Answer: XC6124C419MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.Question: Can XC6124C419MR-G be used in automotive applications?
Answer: Yes, XC6124C419MR-G is AEC-Q100 qualified and can be used in automotive applications that require reliable voltage monitoring and reset functionality.Question: Are there any additional features or protections provided by XC6124C419MR-G?
Answer: Yes, XC6124C419MR-G includes features like hysteresis, which prevents oscillation near the threshold voltage, and overcurrent protection, which safeguards against excessive current flow.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.