Torex Semiconductor Ltd
Bild kan vara representation.
Se specifikationer för produktinformation.
XC6124A535MR-G
Visa detalj Datablad

XC6124A535MR-G

Product Overview

Category

XC6124A535MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6124A535MR-G comes in a small surface-mount package.

Essence

The essence of XC6124A535MR-G is its ability to regulate voltage with high efficiency and low dropout voltage.

Packaging/Quantity

It is typically packaged in reels and available in quantities of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124A535MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Voltage regulation: XC6124A535MR-G ensures a stable output voltage of 3.3V regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard the circuit from excessive current flow.
  • Thermal shutdown protection: In case of excessive temperature, the regulator shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Small size allows for space-saving designs.
  • High efficiency results in minimal power loss.
  • Wide input voltage range makes it versatile for various applications.
  • Overcurrent and thermal shutdown protection enhance circuit reliability.

Disadvantages

  • Limited output current of 150mA may not be suitable for high-power applications.
  • Dropout voltage of 200mV may affect performance in low-voltage scenarios.

Working Principles

XC6124A535MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage of 3.3V. The regulator continuously monitors the input voltage, adjusting its internal components to compensate for any variations and provide a consistent output.

Detailed Application Field Plans

XC6124A535MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124A535MR-G are: - LM1117-3.3: A popular linear voltage regulator with similar specifications. - AP2112-3.3: Another voltage regulator known for its low dropout voltage. - TPS79633: A high-performance voltage regulator with excellent line and load regulation.

These alternative models offer similar functionality and can be used as substitutes depending on specific requirements.

Word count: 380 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av XC6124A535MR-G i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of XC6124A535MR-G in technical solutions:

  1. Question: What is the XC6124A535MR-G?
    Answer: The XC6124A535MR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6124A535MR-G?
    Answer: The operating voltage range of XC6124A535MR-G is from 0.9V to 6.0V.

  3. Question: What is the typical current consumption of XC6124A535MR-G?
    Answer: The typical current consumption of XC6124A535MR-G is 1.0µA.

  4. Question: How does XC6124A535MR-G provide a reset signal?
    Answer: XC6124A535MR-G has an open-drain output that pulls low when the voltage drops below the threshold, providing a reset signal to the connected microcontroller or other devices.

  5. Question: Can XC6124A535MR-G be used in battery-powered applications?
    Answer: Yes, XC6124A535MR-G is suitable for battery-powered applications due to its low current consumption.

  6. Question: What is the reset delay time of XC6124A535MR-G?
    Answer: The reset delay time of XC6124A535MR-G is typically 100ms.

  7. Question: Is XC6124A535MR-G available in different package options?
    Answer: Yes, XC6124A535MR-G is available in a SOT-25 package.

  8. Question: Can XC6124A535MR-G tolerate reverse polarity?
    Answer: No, XC6124A535MR-G is not designed to tolerate reverse polarity. Proper circuit protection should be implemented to prevent reverse voltage.

  9. Question: What is the temperature range for XC6124A535MR-G?
    Answer: The temperature range for XC6124A535MR-G is from -40°C to +85°C.

  10. Question: Can XC6124A535MR-G be used in automotive applications?
    Answer: Yes, XC6124A535MR-G is suitable for automotive applications as it meets the AEC-Q100 standard and has a wide operating temperature range.

Please note that these answers are based on general information about XC6124A535MR-G and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed technical specifications and guidelines.