XC6123D343MR-G
Product Overview
Category
XC6123D343MR-G belongs to the category of voltage regulators.
Use
It is commonly used for regulating voltage in electronic circuits.
Characteristics
- Compact size
- High efficiency
- Low power consumption
- Wide input voltage range
- Overcurrent protection
- Thermal shutdown protection
Package
XC6123D343MR-G is available in a small surface-mount package.
Essence
The essence of XC6123D343MR-G lies in its ability to regulate voltage effectively and efficiently.
Packaging/Quantity
The product is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 3.3V
- Output Current: 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- EN: Enable pin (optional)
Functional Features
- Voltage regulation: XC6123D343MR-G provides a stable output voltage of 3.3V regardless of input voltage fluctuations.
- Overcurrent protection: The device automatically shuts down if the output current exceeds the specified limit, protecting the circuit from damage.
- Thermal shutdown protection: In case of excessive temperature, the regulator enters a thermal shutdown mode to prevent overheating.
Advantages and Disadvantages
Advantages
- Small form factor allows for easy integration into compact electronic devices.
- High efficiency results in minimal power loss during voltage regulation.
- Wide input voltage range provides flexibility in various applications.
- Overcurrent and thermal shutdown protection enhance the reliability of the circuit.
Disadvantages
- Limited output current capacity may not be suitable for high-power applications.
- Lack of adjustable output voltage limits its versatility in certain scenarios.
Working Principles
XC6123D343MR-G utilizes a feedback mechanism to maintain a constant output voltage. It compares the output voltage with a reference voltage and adjusts the internal circuitry accordingly to regulate the output voltage at the desired level.
Detailed Application Field Plans
XC6123D343MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Wearable devices - IoT devices - Battery-powered devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6123D343MR-G are: - XC6206P332MR: 3.3V voltage regulator with higher output current capacity - LM1117-3.3: Adjustable voltage regulator with similar characteristics - MCP1700-3302E: Low dropout voltage regulator with 3.3V output
These alternative models offer different features and specifications, allowing users to choose the most suitable option based on their specific requirements.
Word count: 411
Lista 10 Vanliga frågor och svar relaterade till tillämpningen av XC6123D343MR-G i tekniska lösningar
Sure! Here are 10 common questions and answers related to the application of XC6123D343MR-G in technical solutions:
Q: What is XC6123D343MR-G? A: XC6123D343MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Q: What is the operating voltage range of XC6123D343MR-G? A: The operating voltage range of XC6123D343MR-G is from 0.8V to 6.0V.
Q: What is the output type of XC6123D343MR-G? A: XC6123D343MR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve different logic levels.
Q: What is the typical quiescent current consumption of XC6123D343MR-G? A: The typical quiescent current consumption of XC6123D343MR-G is very low, usually around 1.0µA.
Q: Can XC6123D343MR-G be used for undervoltage detection? A: Yes, XC6123D343MR-G can be used for undervoltage detection. It has a built-in voltage reference and comparator to monitor the input voltage and provide an output signal when it falls below a certain threshold.
Q: What is the accuracy of the voltage detection in XC6123D343MR-G? A: The accuracy of voltage detection in XC6123D343MR-G is typically ±1.5%.
Q: Is XC6123D343MR-G suitable for battery-powered applications? A: Yes, XC6123D343MR-G is suitable for battery-powered applications due to its low quiescent current consumption and wide operating voltage range.
Q: Can XC6123D343MR-G be used in automotive applications? A: Yes, XC6123D343MR-G is AEC-Q100 qualified, making it suitable for automotive applications where reliable voltage monitoring is required.
Q: Does XC6123D343MR-G have any built-in protection features? A: Yes, XC6123D343MR-G has built-in overcurrent protection and thermal shutdown features to protect the IC from damage under fault conditions.
Q: What package does XC6123D343MR-G come in? A: XC6123D343MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.