Torex Semiconductor Ltd
Bild kan vara representation.
Se specifikationer för produktinformation.
XC6122A217MG-G
Visa detalj Datablad

XC6122A217MG-G

Product Overview

Category

XC6122A217MG-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • Low power consumption
  • High accuracy
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6122A217MG-G comes in a small surface-mount package.

Essence

The essence of XC6122A217MG-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

The product is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.17V
  • Output Current: 200mA
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122A217MG-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Low dropout voltage
  • Excellent line and load regulation
  • Short-circuit protection
  • Thermal shutdown protection
  • Fast transient response

Advantages and Disadvantages

Advantages

  • Small form factor
  • Low power consumption
  • Wide input voltage range
  • Overcurrent and thermal protection
  • Stable and accurate voltage output

Disadvantages

  • Limited output current capacity (200mA)

Working Principles

XC6122A217MG-G operates based on the principle of a linear voltage regulator. It uses a feedback mechanism to maintain a constant output voltage regardless of changes in the input voltage or load conditions. The internal circuitry of the regulator adjusts the current flow to ensure a stable and regulated output voltage.

Detailed Application Field Plans

XC6122A217MG-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Industrial control systems - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122A217MG-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar functionality and specifications, providing options for different design requirements.

Word count: 311 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av XC6122A217MG-G i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of XC6122A217MG-G in technical solutions:

  1. Question: What is XC6122A217MG-G?
    - Answer: XC6122A217MG-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring and detecting voltage levels in various electronic applications.

  2. Question: What is the operating voltage range of XC6122A217MG-G?
    - Answer: The operating voltage range of XC6122A217MG-G is typically between 0.7V and 6.0V.

  3. Question: How does XC6122A217MG-G work?
    - Answer: XC6122A217MG-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or rises above the reference voltage, the output of the IC changes state, indicating a voltage detection event.

  4. Question: What is the output configuration of XC6122A217MG-G?
    - Answer: XC6122A217MG-G has an open-drain output configuration, which means it can sink current but cannot source current. An external pull-up resistor is required to provide the output voltage level.

  5. Question: What is the typical quiescent current consumption of XC6122A217MG-G?
    - Answer: The typical quiescent current consumption of XC6122A217MG-G is very low, usually around 1.0µA.

  6. Question: Can XC6122A217MG-G be used for overvoltage protection?
    - Answer: No, XC6122A217MG-G is primarily designed for undervoltage detection. It does not provide overvoltage protection functionality.

  7. Question: What is the typical voltage detection threshold of XC6122A217MG-G?
    - Answer: The typical voltage detection threshold of XC6122A217MG-G is 2.17V, as indicated by the part number.

  8. Question: Can XC6122A217MG-G be used in battery-powered applications?
    - Answer: Yes, XC6122A217MG-G is suitable for battery-powered applications due to its low quiescent current consumption and wide operating voltage range.

  9. Question: Is XC6122A217MG-G compatible with both digital and analog circuits?
    - Answer: Yes, XC6122A217MG-G can be used with both digital and analog circuits as it operates independently of the signal type.

  10. Question: What are some common applications of XC6122A217MG-G?
    - Answer: XC6122A217MG-G is commonly used in various technical solutions such as battery-powered devices, power management systems, portable electronics, automotive electronics, and industrial control systems for undervoltage detection and monitoring purposes.

Please note that the answers provided here are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.