XC6118N40DGR-G
Product Overview
Category
XC6118N40DGR-G belongs to the category of voltage regulators.
Use
It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.
Characteristics
- Voltage regulation: XC6118N40DGR-G provides a stable output voltage.
- Low dropout voltage: It operates efficiently even when the input voltage is close to the output voltage.
- Low quiescent current: It consumes minimal power when in standby mode.
- Thermal shutdown protection: It automatically shuts down to prevent damage from excessive heat.
Package
XC6118N40DGR-G is available in a small surface-mount package.
Essence
The essence of XC6118N40DGR-G lies in its ability to provide reliable voltage regulation for electronic devices.
Packaging/Quantity
It is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.
Specifications
- Input voltage range: 2.5V - 6.0V
- Output voltage: 4.0V
- Output current: Up to 150mA
- Dropout voltage: 200mV (typical)
- Quiescent current: 1.0μA (typical)
- Operating temperature range: -40°C to +85°C
Detailed Pin Configuration
XC6118N40DGR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
Functional Features
- Voltage regulation: XC6118N40DGR-G maintains a constant output voltage regardless of input voltage fluctuations.
- Low dropout voltage: It can operate with a minimal voltage difference between the input and output.
- Low quiescent current: It consumes very little power when not actively regulating the voltage.
- Thermal shutdown protection: It automatically shuts down to prevent overheating and potential damage.
Advantages and Disadvantages
Advantages
- Stable output voltage ensures reliable performance of electronic components.
- Low dropout voltage allows for efficient operation even with low input voltages.
- Low quiescent current minimizes power consumption in standby mode.
- Thermal shutdown protection prevents damage from excessive heat.
Disadvantages
- Limited output current capacity (up to 150mA).
- Restricted input voltage range (2.5V - 6.0V).
Working Principles
XC6118N40DGR-G utilizes internal circuitry to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal feedback loop accordingly. This feedback loop ensures that the output voltage remains stable, compensating for any variations in the input voltage.
Detailed Application Field Plans
XC6118N40DGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - Battery-powered devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6118N40DGR-G are: - LM1117-4.0 - MCP1700-4002E/TO - LP2985-4.0
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.
In conclusion, XC6118N40DGR-G is a voltage regulator that provides stable output voltage, low dropout voltage, and low quiescent current. It offers thermal shutdown protection and finds applications in various electronic devices. While it has limitations in terms of output current capacity and input voltage range, there are alternative models available to suit different needs.
Lista 10 Vanliga frågor och svar relaterade till tillämpningen av XC6118N40DGR-G i tekniska lösningar
Sure! Here are 10 common questions and answers related to the application of XC6118N40DGR-G in technical solutions:
Q: What is XC6118N40DGR-G? A: XC6118N40DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6118N40DGR-G? A: The operating voltage range of XC6118N40DGR-G is typically between 0.9V and 6.0V.
Q: How does XC6118N40DGR-G help in technical solutions? A: XC6118N40DGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level.
Q: What is the typical reset voltage threshold of XC6118N40DGR-G? A: The typical reset voltage threshold of XC6118N40DGR-G is 4.0V.
Q: Can XC6118N40DGR-G be used in battery-powered applications? A: Yes, XC6118N40DGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: Does XC6118N40DGR-G have any built-in delay for the reset signal? A: Yes, XC6118N40DGR-G has a built-in delay of typically 200ms to ensure stable power supply before releasing the reset signal.
Q: Is XC6118N40DGR-G suitable for automotive applications? A: Yes, XC6118N40DGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: Can XC6118N40DGR-G be used in industrial control systems? A: Yes, XC6118N40DGR-G can be used in industrial control systems as it operates reliably in a wide temperature range of -40°C to +85°C.
Q: Does XC6118N40DGR-G have any additional features or protection mechanisms? A: Yes, XC6118N40DGR-G has built-in overcurrent protection and a hysteresis function to prevent false triggering due to voltage fluctuations.
Q: What package does XC6118N40DGR-G come in? A: XC6118N40DGR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements of XC6118N40DGR-G.