Torex Semiconductor Ltd
Bild kan vara representation.
Se specifikationer för produktinformation.
XC6118N23DGR-G
Visa detalj Datablad

XC6118N23DGR-G

Product Overview

Category

XC6118N23DGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Package: DFN (Dual Flat No-leads)
  • Essence: Low dropout voltage regulator
  • Packaging/Quantity: Tape and reel, 3000 pieces per reel

Specifications

The specifications for XC6118N23DGR-G are as follows:

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 2.3V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6118N23DGR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

The functional features of XC6118N23DGR-G include:

  • Low dropout voltage: The regulator can maintain a stable output voltage even when the input voltage is close to the desired output voltage.
  • Low quiescent current: It consumes minimal current when in standby mode, making it suitable for battery-powered applications.
  • Thermal shutdown protection: The regulator automatically shuts down if the temperature exceeds a certain threshold, preventing damage to the device.
  • Short-circuit protection: It has built-in protection against short circuits, ensuring the safety of the circuit.

Advantages and Disadvantages

Advantages: - Small package size allows for space-saving designs. - Wide input voltage range provides flexibility in various applications. - Low dropout voltage enables efficient power conversion.

Disadvantages: - Limited output current may not be suitable for high-power applications. - Lack of adjustable output voltage limits its versatility in certain designs.

Working Principles

XC6118N23DGR-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage and adjusting the pass transistor accordingly to maintain a stable output voltage.

Detailed Application Field Plans

XC6118N23DGR-G can be used in various applications, including but not limited to:

  1. Battery-powered devices: Portable electronics, such as smartphones, tablets, and wearable devices, can benefit from the low quiescent current and efficient power conversion provided by this voltage regulator.
  2. Automotive electronics: It can be used in automotive applications where a stable voltage supply is required for sensors, actuators, and other electronic components.
  3. Industrial control systems: The regulator can be utilized in industrial control systems to provide reliable and regulated power to microcontrollers, sensors, and communication modules.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6118N23DGR-G are:

  1. LM1117-2.3: A popular voltage regulator with a fixed 2.3V output voltage and a wide input voltage range.
  2. MCP1702-2302: Another low dropout voltage regulator with a fixed 2.3V output voltage and low quiescent current.
  3. TS2937CX-2.3: A compact voltage regulator with a fixed 2.3V output voltage and thermal shutdown protection.

These alternative models can be considered based on specific requirements and availability in different regions.

Word count: 413 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av XC6118N23DGR-G i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of XC6118N23DGR-G in technical solutions:

  1. Q: What is XC6118N23DGR-G? A: XC6118N23DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6118N23DGR-G? A: The operating voltage range of XC6118N23DGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6118N23DGR-G help in technical solutions? A: XC6118N23DGR-G helps in technical solutions by ensuring proper power supply voltage levels, preventing system malfunctions or data corruption during power fluctuations.

  4. Q: Can XC6118N23DGR-G be used in battery-powered applications? A: Yes, XC6118N23DGR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.

  5. Q: What is the output type of XC6118N23DGR-G? A: XC6118N23DGR-G has an active-low CMOS output, which means the output goes low when the voltage drops below the threshold.

  6. Q: Is XC6118N23DGR-G suitable for automotive applications? A: Yes, XC6118N23DGR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  7. Q: Can XC6118N23DGR-G be used in industrial control systems? A: Yes, XC6118N23DGR-G can be used in industrial control systems as it has a wide operating temperature range and is resistant to environmental stress.

  8. Q: Does XC6118N23DGR-G have built-in hysteresis? A: Yes, XC6118N23DGR-G has built-in hysteresis, which helps prevent oscillation or chattering of the output signal near the threshold voltage.

  9. Q: What is the package type of XC6118N23DGR-G? A: XC6118N23DGR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.

  10. Q: Can XC6118N23DGR-G be used in low-power microcontroller applications? A: Yes, XC6118N23DGR-G can be used in low-power microcontroller applications as it consumes very low power and can provide a reset signal to the microcontroller when the voltage drops below the threshold.

Please note that the answers provided here are general and may vary depending on specific application requirements.