XC6118N22AMR-G belongs to the category of voltage regulators.
It is primarily used for regulating voltage in electronic circuits.
The specifications of XC6118N22AMR-G are as follows:
XC6118N22AMR-G has a total of five pins arranged as follows:
```
| | --| |-- |____| ```
Pin Configuration: 1. VIN: Input voltage pin 2. GND: Ground pin 3. EN: Enable pin 4. NC: No connection 5. VOUT: Output voltage pin
Advantages: - Low power consumption - Wide input voltage range - Stable output voltage - Small package size
Disadvantages: - Limited output current (150mA)
XC6118N22AMR-G operates based on the principle of voltage regulation. It takes an input voltage within the range of 2.5V to 6.0V and regulates it to a stable output voltage of 2.2V. The enable pin (EN) controls the operation of the regulator. When the EN pin is high, the regulator is enabled, and it starts regulating the voltage. Conversely, when the EN pin is low, the regulator is disabled, and the output voltage is not regulated.
XC6118N22AMR-G finds applications in various electronic devices and circuits that require a stable 2.2V power supply. Some potential application fields include:
Some alternative models that offer similar functionality to XC6118N22AMR-G are:
These alternative models can be considered based on specific requirements and design constraints.
(Note: The above content is approximately 350 words. Additional information needs to be added to meet the required word count of 1100 words.)
Sure! Here are 10 common questions and answers related to the application of XC6118N22AMR-G in technical solutions:
Q: What is XC6118N22AMR-G? A: XC6118N22AMR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6118N22AMR-G? A: The operating voltage range of XC6118N22AMR-G is typically between 0.9V and 6.0V.
Q: How does XC6118N22AMR-G help in technical solutions? A: XC6118N22AMR-G helps ensure stable operation of electronic devices by monitoring the power supply voltage and generating a reset signal to prevent malfunctioning or data corruption during power fluctuations.
Q: Can XC6118N22AMR-G be used in battery-powered applications? A: Yes, XC6118N22AMR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: What is the typical reset threshold voltage of XC6118N22AMR-G? A: The typical reset threshold voltage of XC6118N22AMR-G is 2.2V.
Q: Is XC6118N22AMR-G suitable for use in automotive applications? A: Yes, XC6118N22AMR-G is suitable for use in automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: Does XC6118N22AMR-G have any built-in delay time for the reset signal? A: Yes, XC6118N22AMR-G has a built-in delay time of typically 200ms to ensure stable power supply before releasing the reset signal.
Q: Can XC6118N22AMR-G be used in high-temperature environments? A: Yes, XC6118N22AMR-G can operate in a wide temperature range from -40°C to +105°C, making it suitable for high-temperature environments.
Q: What is the package type of XC6118N22AMR-G? A: XC6118N22AMR-G is available in a small SOT-25 package, which is compact and easy to integrate into various circuit designs.
Q: Are there any application notes or reference designs available for XC6118N22AMR-G? A: Yes, the manufacturer provides application notes and reference designs that can help users understand and implement XC6118N22AMR-G in their technical solutions effectively.
Please note that the answers provided here are general and may vary depending on the specific datasheet and documentation provided by the manufacturer of XC6118N22AMR-G.