Torex Semiconductor Ltd
Bild kan vara representation.
Se specifikationer för produktinformation.
XC6118N10DGR-G
Visa detalj Datablad

XC6118N10DGR-G

Product Overview

Category

XC6118N10DGR-G belongs to the category of voltage regulators.

Use

It is primarily used for voltage regulation in electronic circuits.

Characteristics

  • Package: DFN (Dual Flat No-Lead)
  • Essence: Low dropout voltage regulator
  • Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

The specifications of XC6118N10DGR-G are as follows:

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 1.0V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6118N10DGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

The functional features of XC6118N10DGR-G include:

  • Low dropout voltage: The regulator maintains a stable output voltage even when the input voltage is close to the desired output voltage.
  • Low quiescent current: It consumes minimal current when there is no load, resulting in improved energy efficiency.
  • Overcurrent protection: The device automatically shuts down if the output current exceeds the specified limit, protecting the circuit from damage.
  • Thermal shutdown protection: In case of excessive temperature, the regulator enters a shutdown mode to prevent overheating.

Advantages and Disadvantages

Advantages: - Compact package size - Low dropout voltage - Low quiescent current - Overcurrent and thermal shutdown protection

Disadvantages: - Limited output current capacity (150mA)

Working Principles

XC6118N10DGR-G is a low dropout voltage regulator that uses a PNP transistor as the pass element. It regulates the output voltage by adjusting the resistance between the input and output terminals. When the input voltage is higher than the desired output voltage, the pass element conducts and maintains a stable output voltage. The regulator continuously monitors the output voltage and adjusts the resistance to compensate for any changes in the input voltage or load conditions.

Detailed Application Field Plans

XC6118N10DGR-G can be used in various applications, including:

  1. Battery-powered devices: It can regulate the voltage for portable electronic devices such as smartphones, tablets, and wearable devices.
  2. IoT (Internet of Things) devices: It is suitable for low-power IoT devices that require a stable power supply.
  3. Automotive electronics: It can be used in automotive applications where a stable voltage is essential for various components.

Detailed and Complete Alternative Models

Some alternative models to XC6118N10DGR-G are:

  1. XC6206P332MR-G
  2. XC6220B331MR-G
  3. XC6504E2217MR-G
  4. XC6219B331MR-G
  5. XC6220B331MRN-G

These models offer similar functionality and characteristics, providing options for different design requirements.

(Note: The content provided above is approximately 300 words. Additional information can be added to meet the required word count of 1100 words.)

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av XC6118N10DGR-G i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of XC6118N10DGR-G in technical solutions:

  1. Q: What is XC6118N10DGR-G? A: XC6118N10DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6118N10DGR-G? A: The operating voltage range of XC6118N10DGR-G is typically between 0.9V and 10V.

  3. Q: How does XC6118N10DGR-G help in technical solutions? A: XC6118N10DGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level.

  4. Q: Can XC6118N10DGR-G be used in battery-powered applications? A: Yes, XC6118N10DGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  5. Q: What is the output type of XC6118N10DGR-G? A: XC6118N10DGR-G has an open-drain output type, which means it requires an external pull-up resistor to provide a logic high signal.

  6. Q: What is the typical reset threshold voltage of XC6118N10DGR-G? A: The typical reset threshold voltage of XC6118N10DGR-G is 1.0V.

  7. Q: Can XC6118N10DGR-G tolerate voltage spikes or transients? A: Yes, XC6118N10DGR-G has built-in hysteresis and can tolerate voltage spikes or transients up to 20% of the operating voltage range.

  8. Q: Is XC6118N10DGR-G available in different package options? A: Yes, XC6118N10DGR-G is available in various package options, such as SOT-25, SOT-89, and USP-6C.

  9. Q: Can XC6118N10DGR-G be used in automotive applications? A: Yes, XC6118N10DGR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  10. Q: What are some typical applications of XC6118N10DGR-G? A: Some typical applications of XC6118N10DGR-G include power supply monitoring in microcontrollers, battery-powered devices, industrial equipment, automotive systems, and portable electronics.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.