Torex Semiconductor Ltd
Bild kan vara representation.
Se specifikationer för produktinformation.
XC6118N09AGR-G
Visa detalj Datablad

XC6118N09AGR-G

Product Overview

Category

XC6118N09AGR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Small size and lightweight
  • Low power consumption
  • High precision voltage regulation
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6118N09AGR-G is available in a small SOT-23-5 package.

Essence

The essence of XC6118N09AGR-G is its ability to provide stable and regulated voltage output.

Packaging/Quantity

It is typically packaged in reels, with 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 0.9V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6118N09AGR-G has five pins:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin (active high)
  4. FB: Feedback pin for voltage regulation
  5. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6118N09AGR-G ensures a stable output voltage of 0.9V regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard the circuit from excessive current flow.
  • Thermal shutdown protection: In case of excessive temperature rise, the device shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Compact size and lightweight make it suitable for space-constrained applications.
  • Low power consumption helps in energy-efficient designs.
  • High precision voltage regulation ensures stable performance.
  • Wide input voltage range allows compatibility with various power sources.

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications.
  • Dropout voltage of 200mV may cause a slight voltage drop across the regulator.

Working Principles

XC6118N09AGR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage of 0.9V. The enable pin (EN) controls the operation of the regulator.

Detailed Application Field Plans

XC6118N09AGR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Embedded systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6118N09AGR-G are: - LM1117-3.3: A 3.3V voltage regulator with similar characteristics - MCP1702-5002E: A 5.0V voltage regulator with low quiescent current - LT1761ES5-3.3: A 3.3V voltage regulator with low dropout voltage

These alternative models offer different output voltages and may have varying specifications, allowing designers to choose the most suitable option for their specific application requirements.

Word count: 439 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av XC6118N09AGR-G i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of XC6118N09AGR-G in technical solutions:

  1. Q: What is XC6118N09AGR-G? A: XC6118N09AGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6118N09AGR-G? A: The operating voltage range of XC6118N09AGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6118N09AGR-G help in technical solutions? A: XC6118N09AGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, DSPs, or other digital devices when the power supply voltage falls below a specified level, ensuring proper system initialization.

  4. Q: Can XC6118N09AGR-G be used in battery-powered applications? A: Yes, XC6118N09AGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA, making it suitable for power-sensitive designs.

  5. Q: What is the output type of XC6118N09AGR-G? A: XC6118N09AGR-G has an open-drain output type, which allows flexibility in connecting external components.

  6. Q: What is the typical reset threshold voltage of XC6118N09AGR-G? A: The typical reset threshold voltage of XC6118N09AGR-G is 0.9V.

  7. Q: Does XC6118N09AGR-G have a built-in delay time for the reset signal? A: Yes, XC6118N09AGR-G has a built-in delay time of typically 200ms to ensure stable power supply before releasing the reset signal.

  8. Q: Can XC6118N09AGR-G be used in automotive applications? A: Yes, XC6118N09AGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  9. Q: What is the package type of XC6118N09AGR-G? A: XC6118N09AGR-G is available in a SOT-25 package, which is compact and easy to mount on PCBs.

  10. Q: Is XC6118N09AGR-G RoHS compliant? A: Yes, XC6118N09AGR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6118N09AGR-G.