Torex Semiconductor Ltd
Bild kan vara representation.
Se specifikationer för produktinformation.
XC6118C49AGR-G
Visa detalj Datablad

XC6118C49AGR-G

Product Overview

Category

XC6118C49AGR-G belongs to the category of voltage regulators.

Use

It is commonly used as a power management solution in electronic devices.

Characteristics

  • Voltage regulation capability
  • Low dropout voltage
  • High accuracy
  • Thermal shutdown protection
  • Overcurrent protection

Package

XC6118C49AGR-G is available in a small surface-mount package.

Essence

The essence of XC6118C49AGR-G lies in its ability to regulate and stabilize voltage levels in electronic circuits.

Packaging/Quantity

The product is typically packaged in reels or tubes, with a quantity of several hundred units per package.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.0V
  • Dropout Voltage: 200mV (typical)
  • Output Current: 150mA (maximum)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6118C49AGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: The XC6118C49AGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
  • Thermal shutdown protection: The device automatically shuts down if the temperature exceeds a certain threshold, preventing damage.
  • Overcurrent protection: It safeguards the circuit by limiting the output current to a safe level.

Advantages and Disadvantages

Advantages

  • High accuracy in voltage regulation
  • Low dropout voltage for efficient operation
  • Thermal and overcurrent protection for enhanced safety

Disadvantages

  • Limited output current capacity (150mA maximum)
  • Restricted input voltage range (2.5V - 6.0V)

Working Principles

XC6118C49AGR-G utilizes a feedback mechanism to maintain a constant output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry accordingly. This ensures that the output voltage remains stable even when the input voltage or load conditions change.

Detailed Application Field Plans

XC6118C49AGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Digital cameras - Wearable devices

It is particularly useful in battery-powered devices where maintaining a stable voltage level is crucial for proper functionality.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6118C49AGR-G include: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These alternatives can be considered based on specific requirements and compatibility with the target application.

Word count: 398

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av XC6118C49AGR-G i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of XC6118C49AGR-G in technical solutions:

  1. Question: What is XC6118C49AGR-G?
    - Answer: XC6118C49AGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6118C49AGR-G?
    - Answer: The operating voltage range of XC6118C49AGR-G is typically between 0.9V and 6.0V.

  3. Question: How does XC6118C49AGR-G help in technical solutions?
    - Answer: XC6118C49AGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level. This ensures proper initialization and prevents data corruption.

  4. Question: What is the output type of XC6118C49AGR-G?
    - Answer: XC6118C49AGR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve the desired logic level.

  5. Question: What is the typical reset threshold voltage of XC6118C49AGR-G?
    - Answer: The typical reset threshold voltage of XC6118C49AGR-G is 4.9V.

  6. Question: Can XC6118C49AGR-G be used in battery-powered applications?
    - Answer: Yes, XC6118C49AGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA, making it suitable for power-sensitive designs.

  7. Question: Does XC6118C49AGR-G have any built-in delay for the reset signal?
    - Answer: Yes, XC6118C49AGR-G has a built-in delay of typically 200ms to ensure stable power supply before releasing the reset signal.

  8. Question: What is the temperature range in which XC6118C49AGR-G can operate?
    - Answer: XC6118C49AGR-G can operate within a temperature range of -40°C to +85°C.

  9. Question: Can XC6118C49AGR-G be used in automotive applications?
    - Answer: Yes, XC6118C49AGR-G is AEC-Q100 qualified and can be used in automotive applications where reliable voltage monitoring and reset functionality are required.

  10. Question: Is XC6118C49AGR-G available in different package options?
    - Answer: Yes, XC6118C49AGR-G is available in various package options, including SOT-25 and USP-4B, providing flexibility for different design requirements.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application guidelines provided by the manufacturer.