XC6118C40DGR-G
Product Overview
Category
XC6118C40DGR-G belongs to the category of voltage regulators.
Use
It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.
Characteristics
- Voltage regulation: XC6118C40DGR-G provides a stable output voltage.
- Low dropout voltage: It operates efficiently even when the input voltage is close to the output voltage.
- Low quiescent current: The regulator consumes minimal current when no load is connected.
- Overcurrent protection: It safeguards the circuit by limiting the current in case of a fault.
- Thermal shutdown: It automatically shuts down to prevent damage due to excessive heat.
Package
XC6118C40DGR-G is available in a small form factor package, such as SOT-23 or DFN, making it suitable for space-constrained applications.
Essence
The essence of XC6118C40DGR-G lies in its ability to provide stable and regulated voltage to ensure proper functioning of electronic devices.
Packaging/Quantity
Typically, XC6118C40DGR-G is packaged in reels or tubes, with quantities ranging from a few hundred to several thousand units per package.
Specifications
- Input voltage range: 2.5V - 6.0V
- Output voltage: 4.0V
- Maximum output current: 100mA
- Dropout voltage: 200mV (at 50mA)
- Quiescent current: 25µA (typical)
- Operating temperature range: -40°C to +85°C
Detailed Pin Configuration
XC6118C40DGR-G has three pins:
- VIN: Input voltage pin
- VOUT: Output voltage pin
- GND: Ground pin
Functional Features
- Voltage regulation: XC6118C40DGR-G maintains a constant output voltage regardless of input voltage fluctuations.
- Overcurrent protection: It limits the output current to protect the circuit from damage.
- Thermal shutdown: The regulator shuts down when the temperature exceeds a certain threshold, preventing overheating.
Advantages and Disadvantages
Advantages
- Stable output voltage ensures reliable operation of electronic components.
- Low dropout voltage allows efficient operation even with small voltage differentials.
- Compact package size enables use in space-constrained applications.
- Overcurrent protection safeguards the circuit from damage.
- Thermal shutdown prevents overheating and potential failures.
Disadvantages
- Limited maximum output current (100mA) may not be suitable for high-power applications.
- Input voltage range (2.5V - 6.0V) restricts compatibility with certain power sources.
Working Principles
XC6118C40DGR-G utilizes internal circuitry to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal feedback loop to maintain a stable output. The overcurrent protection feature monitors the output current and limits it to a safe level. In case of excessive heat, the thermal shutdown mechanism activates, temporarily disabling the regulator until the temperature returns to a safe range.
Detailed Application Field Plans
XC6118C40DGR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Automotive electronics - Medical equipment
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6118C40DGR-G are: - LM1117-4.0 - MCP1700-400 - LP2985-4.0 - AP2112-4.0
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements and availability.
Word count: 452
Lista 10 Vanliga frågor och svar relaterade till tillämpningen av XC6118C40DGR-G i tekniska lösningar
Sure! Here are 10 common questions and answers related to the application of XC6118C40DGR-G in technical solutions:
Q: What is XC6118C40DGR-G? A: XC6118C40DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6118C40DGR-G? A: The operating voltage range of XC6118C40DGR-G is typically between 0.9V and 6.0V.
Q: How does XC6118C40DGR-G help in technical solutions? A: XC6118C40DGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level.
Q: What is the typical reset voltage threshold of XC6118C40DGR-G? A: The typical reset voltage threshold of XC6118C40DGR-G is 4.0V.
Q: Can XC6118C40DGR-G be used in battery-powered applications? A: Yes, XC6118C40DGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: Does XC6118C40DGR-G have any built-in delay for the reset signal? A: Yes, XC6118C40DGR-G has a built-in delay of typically 200ms to ensure stable power supply before releasing the reset signal.
Q: Is XC6118C40DGR-G suitable for automotive applications? A: Yes, XC6118C40DGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: Can XC6118C40DGR-G be used in industrial control systems? A: Yes, XC6118C40DGR-G can be used in industrial control systems as it operates reliably in a wide temperature range of -40°C to +85°C.
Q: Does XC6118C40DGR-G have any additional features? A: Yes, XC6118C40DGR-G has an open-drain output and a manual reset input pin for additional flexibility in system design.
Q: What package does XC6118C40DGR-G come in? A: XC6118C40DGR-G comes in a small SOT-25 package, which is compact and suitable for space-constrained applications.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6118C40DGR-G.