Torex Semiconductor Ltd
Bild kan vara representation.
Se specifikationer för produktinformation.
XC6118C27CGR-G
Visa detalj Datablad

XC6118C27CGR-G

Product Overview

Category

XC6118C27CGR-G belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • Low power consumption

Package

XC6118C27CGR-G is available in a small form factor package, typically a 6-pin SOT-23 package.

Essence

The essence of XC6118C27CGR-G lies in its ability to regulate voltage efficiently and manage power consumption effectively.

Packaging/Quantity

This IC is usually packaged in reels or tubes, with a typical quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.7V
  • Output Current: Up to 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. NC: No connection
  5. VOUT: Output voltage pin
  6. NC: No connection

Functional Features

  • Voltage regulation: The XC6118C27CGR-G ensures a stable output voltage of 2.7V regardless of input voltage fluctuations.
  • Power management: This IC efficiently manages power consumption, reducing energy waste and extending battery life.
  • Enable pin: The EN pin allows for easy control of the device's operation, enabling or disabling the voltage regulation function.

Advantages and Disadvantages

Advantages

  • Compact size: The small form factor of XC6118C27CGR-G makes it suitable for space-constrained applications.
  • Low power consumption: The IC's low quiescent current ensures minimal power loss during operation.
  • Stable output voltage: It provides a consistent output voltage, ensuring reliable performance of connected devices.

Disadvantages

  • Limited output current: The maximum output current of 100mA may not be sufficient for high-power applications.
  • Narrow input voltage range: The input voltage range of 2.5V - 6.0V may limit compatibility with certain systems.

Working Principles

XC6118C27CGR-G utilizes internal circuitry to regulate the input voltage and provide a stable output voltage of 2.7V. It achieves this through a combination of feedback control and power management techniques. The enable pin allows for easy on/off control of the voltage regulation function.

Detailed Application Field Plans

XC6118C27CGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Wearable devices - IoT devices - Battery-powered devices

Detailed and Complete Alternative Models

  1. XC6118C27AGR-G: Similar to XC6118C27CGR-G, but available in a different package (SOT-89).
  2. XC6118C27DGR-G: A variant with a higher output current capability (up to 200mA).
  3. XC6118C27FGR-G: Offers a wider input voltage range (2.0V - 6.0V) compared to XC6118C27CGR-G.

These alternative models provide similar voltage regulation and power management functionalities, catering to different application requirements.

Word count: 446 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av XC6118C27CGR-G i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of XC6118C27CGR-G in technical solutions:

  1. Q: What is XC6118C27CGR-G? A: XC6118C27CGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6118C27CGR-G? A: The operating voltage range of XC6118C27CGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6118C27CGR-G help in technical solutions? A: XC6118C27CGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level, ensuring proper system initialization.

  4. Q: What is the output type of XC6118C27CGR-G? A: XC6118C27CGR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve different logic levels.

  5. Q: What is the typical reset threshold voltage of XC6118C27CGR-G? A: The typical reset threshold voltage of XC6118C27CGR-G is 2.7V.

  6. Q: Can XC6118C27CGR-G be used in battery-powered applications? A: Yes, XC6118C27CGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  7. Q: Does XC6118C27CGR-G have any built-in delay for the reset signal? A: Yes, XC6118C27CGR-G has a built-in delay of typically 200ms to ensure stable power supply voltage before releasing the reset signal.

  8. Q: What is the operating temperature range of XC6118C27CGR-G? A: The operating temperature range of XC6118C27CGR-G is typically between -40°C and +85°C.

  9. Q: Can XC6118C27CGR-G be used in automotive applications? A: Yes, XC6118C27CGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  10. Q: Is XC6118C27CGR-G available in different package options? A: Yes, XC6118C27CGR-G is available in various package options, such as SOT-25 and USP-4B, providing flexibility for different design requirements.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6118C27CGR-G.