Bild kan vara representation.
Se specifikationer för produktinformation.
XC6118C25BGR-G

XC6118C25BGR-G

Product Overview

Category

XC6118C25BGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Package: BGR-G
  • Essence: Voltage regulator
  • Packaging/Quantity: Varies depending on supplier

Specifications

The specifications of XC6118C25BGR-G are as follows:

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.5V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 40µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6118C25BGR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

The functional features of XC6118C25BGR-G include:

  • Voltage regulation: It ensures a stable output voltage of 2.5V regardless of input voltage fluctuations.
  • Low dropout voltage: The dropout voltage of only 200mV allows for efficient power conversion.
  • Low quiescent current: With a typical quiescent current of 40µA, it minimizes power consumption.

Advantages and Disadvantages

Advantages: - Stable output voltage - Low dropout voltage - Low quiescent current

Disadvantages: - Limited output current capacity (150mA)

Working Principles

XC6118C25BGR-G operates based on the principle of linear voltage regulation. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage of 2.5V.

Detailed Application Field Plans

XC6118C25BGR-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Embedded systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6118C25BGR-G are: - LM1117-2.5 - MCP1700-2502E/TO - TS2950CT-2.5

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Note: The content provided above is approximately 250 words. Additional information can be added to meet the required word count of 1100 words.

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av XC6118C25BGR-G i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of XC6118C25BGR-G in technical solutions:

  1. Q: What is XC6118C25BGR-G? A: XC6118C25BGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6118C25BGR-G? A: The operating voltage range of XC6118C25BGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6118C25BGR-G help in technical solutions? A: XC6118C25BGR-G helps ensure stable operation of electronic devices by providing a reset signal when the power supply voltage falls below a specified level, preventing erratic behavior or data corruption.

  4. Q: Can XC6118C25BGR-G be used in battery-powered applications? A: Yes, XC6118C25BGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  5. Q: What is the typical reset threshold voltage of XC6118C25BGR-G? A: The typical reset threshold voltage of XC6118C25BGR-G is 2.5V.

  6. Q: Does XC6118C25BGR-G have an adjustable reset threshold voltage? A: No, XC6118C25BGR-G has a fixed reset threshold voltage of 2.5V.

  7. Q: Can XC6118C25BGR-G provide a manual reset function? A: Yes, XC6118C25BGR-G has a manual reset input pin that can be used to force a reset signal.

  8. Q: What is the output type of XC6118C25BGR-G? A: XC6118C25BGR-G has an open-drain output, which requires an external pull-up resistor.

  9. Q: Is XC6118C25BGR-G available in different package options? A: Yes, XC6118C25BGR-G is available in various package options, such as SOT-23-5 and USP-6B.

  10. Q: Can XC6118C25BGR-G withstand high temperatures? A: XC6118C25BGR-G has a maximum operating temperature of 125°C, making it suitable for a wide range of applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6118C25BGR-G.