Torex Semiconductor Ltd
Bild kan vara representation.
Se specifikationer för produktinformation.
XC6108C20DGR-G
Visa detalj Datablad

XC6108C20DGR-G

Product Overview

Category

XC6108C20DGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize the output voltage.

Characteristics

  • Voltage regulation: XC6108C20DGR-G provides a stable output voltage.
  • Low dropout voltage: It operates efficiently even when the input voltage is close to the output voltage.
  • Low quiescent current: It consumes minimal power when in standby mode.
  • Overcurrent protection: It safeguards the circuit from excessive current flow.
  • Thermal shutdown protection: It prevents overheating of the device.

Package

XC6108C20DGR-G is available in a small surface-mount package.

Essence

The essence of XC6108C20DGR-G lies in its ability to provide a stable and regulated output voltage for electronic circuits.

Packaging/Quantity

The product is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input voltage range: 2.5V - 6.0V
  • Output voltage: 2.0V
  • Dropout voltage: 200mV (typical)
  • Quiescent current: 30μA (typical)
  • Output current: 100mA (maximum)
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

XC6108C20DGR-G has the following pin configuration:

  1. VIN (Input voltage)
  2. GND (Ground)
  3. VOUT (Output voltage)

Functional Features

  • Voltage regulation: XC6108C20DGR-G ensures a stable output voltage regardless of input variations.
  • Overcurrent protection: It safeguards the circuit by limiting the current flow.
  • Thermal shutdown protection: The device shuts down if the temperature exceeds a safe threshold.
  • Low dropout voltage: It operates efficiently even when the input voltage is close to the output voltage.
  • Low quiescent current: It consumes minimal power in standby mode, prolonging battery life.

Advantages and Disadvantages

Advantages

  • Provides stable output voltage
  • Low dropout voltage ensures efficient operation
  • Overcurrent and thermal shutdown protection enhance circuit safety
  • Low quiescent current minimizes power consumption

Disadvantages

  • Limited maximum output current (100mA)
  • Restricted input voltage range (2.5V - 6.0V)

Working Principles

XC6108C20DGR-G utilizes internal circuitry to regulate the output voltage. It compares the reference voltage with the feedback voltage and adjusts the pass transistor accordingly. This feedback loop ensures a constant output voltage despite variations in the input voltage.

Detailed Application Field Plans

XC6108C20DGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108C20DGR-G are: - LM1117-2.0 - MCP1702-2002E/TO - LT1761ES5-2.0

These models offer similar functionality and specifications, providing options for different design requirements.

Word count: 399

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av XC6108C20DGR-G i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of XC6108C20DGR-G in technical solutions:

  1. Q: What is XC6108C20DGR-G? A: XC6108C20DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a specified threshold.

  2. Q: What is the operating voltage range of XC6108C20DGR-G? A: The operating voltage range of XC6108C20DGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108C20DGR-G help in technical solutions? A: XC6108C20DGR-G helps in technical solutions by ensuring proper system operation and preventing data corruption or malfunctioning due to low voltage conditions.

  4. Q: Can XC6108C20DGR-G be used in battery-powered applications? A: Yes, XC6108C20DGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  5. Q: What is the typical reset threshold voltage of XC6108C20DGR-G? A: The typical reset threshold voltage of XC6108C20DGR-G is 2.0V.

  6. Q: Does XC6108C20DGR-G have an adjustable reset threshold voltage? A: No, XC6108C20DGR-G does not have an adjustable reset threshold voltage. It has a fixed threshold voltage of 2.0V.

  7. Q: Can XC6108C20DGR-G provide a manual reset function? A: No, XC6108C20DGR-G does not provide a manual reset function. It only generates a reset signal when the voltage drops below the threshold.

  8. Q: What is the output type of XC6108C20DGR-G? A: XC6108C20DGR-G has an open-drain output type, which requires an external pull-up resistor to provide a logic-level signal.

  9. Q: Is XC6108C20DGR-G suitable for automotive applications? A: Yes, XC6108C20DGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  10. Q: Can XC6108C20DGR-G be used in industrial control systems? A: Yes, XC6108C20DGR-G can be used in industrial control systems as it operates reliably in a wide temperature range (-40°C to +85°C) and has a small package size for space-constrained applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.