Texas Instruments
Bild kan vara representation.
Se specifikationer för produktinformation.
UCC2819ADG4
Visa detalj Datablad

UCC2819ADG4

Product Overview

Category: Integrated Circuit (IC)

Use: Voltage Mode PWM Controller

Characteristics: - High-performance voltage mode controller - Designed for use in switch-mode power supplies - Provides precise regulation of output voltage - Offers protection features for enhanced reliability

Package: SOIC-16

Essence: UCC2819ADG4 is a voltage mode PWM controller that is widely used in switch-mode power supplies to regulate the output voltage with high precision. It offers various protection features to ensure reliable operation.

Packaging/Quantity: UCC2819ADG4 is available in a standard SOIC-16 package. It is typically sold in reels or tubes containing multiple units.

Specifications

  • Input Voltage Range: 8V to 18V
  • Output Voltage Range: 0V to 5V
  • Operating Temperature Range: -40°C to 85°C
  • Maximum Duty Cycle: 100%
  • Frequency Range: 50kHz to 1MHz
  • Output Current: Up to 1A

Detailed Pin Configuration

UCC2819ADG4 has a total of 16 pins, which are assigned specific functions. The pin configuration is as follows:

  1. COMP: Compensation pin for feedback loop
  2. FB: Feedback pin for output voltage regulation
  3. RT/CT: Timing resistor/capacitor connection pin
  4. VREF: Reference voltage pin
  5. GND: Ground pin
  6. SYNC: Synchronization input pin
  7. SS/TR: Soft-start and tracking pin
  8. VDD: Power supply voltage pin
  9. DRVH: High-side gate driver output
  10. DRVL: Low-side gate driver output
  11. HO: High-side floating supply return pin
  12. LO: Low-side floating supply return pin
  13. VSENSE: Current sense input pin
  14. CS: Current sense resistor connection pin
  15. VCC: Voltage supply for internal circuitry
  16. NC: No connection

Functional Features

  • Voltage mode control with precise regulation
  • Adjustable frequency and duty cycle
  • Soft-start and tracking capability
  • Overvoltage protection
  • Undervoltage lockout
  • Overcurrent protection
  • Thermal shutdown protection

Advantages and Disadvantages

Advantages: - High-performance voltage mode controller - Precise output voltage regulation - Wide input voltage range - Various protection features for enhanced reliability - Adjustable frequency and duty cycle for flexibility

Disadvantages: - Limited output current capacity (up to 1A) - Requires external components for complete functionality - Relatively high operating temperature range (-40°C to 85°C)

Working Principles

UCC2819ADG4 operates based on the voltage mode control technique. It compares the feedback voltage from the output with a reference voltage to generate an error signal. This error signal is then amplified and used to adjust the duty cycle of the PWM signal, which controls the power switch in the switch-mode power supply. By continuously monitoring and adjusting the duty cycle, the controller regulates the output voltage with high precision.

Detailed Application Field Plans

UCC2819ADG4 finds extensive application in various switch-mode power supply designs, including but not limited to: - AC/DC power supplies - DC/DC converters - LED drivers - Battery chargers - Industrial power systems - Telecom power supplies

Its precise regulation capabilities, protection features, and adjustable parameters make it suitable for a wide range of applications requiring efficient and reliable power conversion.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to UCC2819ADG4 are: - UCC2817AD - UC3843AD8 - TL494IDR - SG3525AN

These models can be considered as alternatives based on specific requirements and design constraints. It is recommended to refer to the respective datasheets for detailed specifications and pin configurations of these alternative models.

Word count: 537 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av UCC2819ADG4 i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of UCC2819ADG4 in technical solutions:

  1. Q: What is UCC2819ADG4? A: UCC2819ADG4 is a high-performance current-mode PWM controller used in power supply applications.

  2. Q: What are the key features of UCC2819ADG4? A: Some key features include adjustable frequency, soft-start capability, cycle-by-cycle current limiting, and integrated protection features.

  3. Q: How does UCC2819ADG4 help in power supply designs? A: UCC2819ADG4 provides precise control over the power supply output voltage and current, ensuring stable and efficient operation.

  4. Q: Can UCC2819ADG4 be used in both AC-DC and DC-DC power supplies? A: Yes, UCC2819ADG4 can be used in both AC-DC and DC-DC power supply applications.

  5. Q: What is the maximum operating frequency of UCC2819ADG4? A: The maximum operating frequency of UCC2819ADG4 is typically around 1 MHz.

  6. Q: Does UCC2819ADG4 have any built-in protection features? A: Yes, UCC2819ADG4 has built-in protection features such as overvoltage protection, undervoltage lockout, and thermal shutdown.

  7. Q: Can UCC2819ADG4 operate in a wide input voltage range? A: Yes, UCC2819ADG4 can operate in a wide input voltage range, typically from 8V to 18V.

  8. Q: Is UCC2819ADG4 suitable for high-power applications? A: Yes, UCC2819ADG4 is suitable for high-power applications as it can handle high currents and voltages.

  9. Q: Can UCC2819ADG4 be used in battery charging applications? A: Yes, UCC2819ADG4 can be used in battery charging applications by controlling the charging current and voltage.

  10. Q: Are there any application notes or reference designs available for UCC2819ADG4? A: Yes, Texas Instruments provides application notes and reference designs that help in implementing UCC2819ADG4 in various power supply solutions.

Please note that the answers provided here are general and may vary depending on specific design requirements and application scenarios. It's always recommended to refer to the datasheet and relevant documentation for accurate information.