Texas Instruments
Bild kan vara representation.
Se specifikationer för produktinformation.
UCC2818DWTRG4
Visa detalj Datablad

UCC2818DWTRG4

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High-performance PWM Controller
  • Package: SOIC-16
  • Essence: Regulates and controls power delivery in various applications
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 3V to 30V
  • Output Voltage Range: 0.8V to 28V
  • Operating Temperature Range: -40°C to 125°C
  • Switching Frequency: Up to 1MHz
  • Duty Cycle Range: 0% to 100%
  • Maximum Output Current: 1A

Detailed Pin Configuration

The UCC2818DWTRG4 has a total of 16 pins. The pin configuration is as follows:

  1. COMP: Compensation pin for external compensation network.
  2. FB: Feedback pin for regulating the output voltage.
  3. VREF: Reference voltage output pin.
  4. CS: Current sense input pin for current mode control.
  5. RT/CT: Timing resistor/capacitor connection pin for setting switching frequency.
  6. SS/TR: Soft-start/Tracking pin for controlling start-up behavior.
  7. GND: Ground reference pin.
  8. VCC: Supply voltage input pin.

Pins 9 to 16 are not used in this IC.

Functional Features

  • Current Mode Control: Provides stable and efficient regulation by adjusting the duty cycle based on the sensed current.
  • Soft-Start Function: Allows gradual ramp-up of the output voltage during start-up, reducing stress on components.
  • Overcurrent Protection: Monitors the output current and shuts down the controller if it exceeds a predefined threshold.
  • Under-Voltage Lockout (UVLO): Prevents operation when the input voltage falls below a certain level, ensuring proper functionality.
  • Error Amplifier: Compares the feedback voltage with the reference voltage to maintain accurate output regulation.

Advantages and Disadvantages

Advantages: - High-performance PWM controller suitable for a wide range of applications. - Wide input and output voltage ranges provide flexibility in design. - Efficient current mode control ensures stable regulation and fast transient response. - Integrated protection features enhance system reliability.

Disadvantages: - Limited maximum output current of 1A may not be sufficient for high-power applications. - Requires external compensation network for optimal performance.

Working Principles

The UCC2818DWTRG4 is a pulse-width modulation (PWM) controller that regulates power delivery in various applications. It operates based on the current mode control principle, where the duty cycle of the output waveform is adjusted according to the sensed current. This allows for efficient and stable regulation, even during load variations.

The controller compares the feedback voltage from the output with the reference voltage and adjusts the duty cycle accordingly. The error amplifier amplifies the difference between these voltages, providing precise regulation. The soft-start function gradually ramps up the output voltage during start-up, preventing excessive inrush current.

The IC also incorporates overcurrent protection, which monitors the output current and shuts down the controller if it exceeds a predefined threshold. Under-voltage lockout ensures that the controller operates within the specified voltage range, preventing erratic behavior at low input voltages.

Detailed Application Field Plans

The UCC2818DWTRG4 is widely used in power management applications, including:

  1. Switching Power Supplies: The controller regulates the output voltage in switch-mode power supplies, ensuring efficient power conversion.
  2. LED Lighting: It provides precise control over LED driver circuits, enabling dimming and maintaining constant current.
  3. Battery Chargers: The IC facilitates the charging process by regulating the voltage and current delivered to the battery.
  4. Motor Control: It can be used in motor control circuits to regulate the power supplied to motors, ensuring smooth operation.

Detailed and Complete Alternative Models

  1. UCC2818ADWTRG4: Similar specifications and features, but available in a different package (SOIC-16).
  2. UCC2818N: DIP-16 package variant of UCC2818DWTRG4 with similar functionality.
  3. UCC3818DWTRG4: Higher output current capability (up to 3A) with similar specifications and pin configuration.

These alternative models provide options for different package preferences or higher current requirements.

Word count: 536 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av UCC2818DWTRG4 i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of UCC2818DWTRG4 in technical solutions:

  1. Q: What is UCC2818DWTRG4? A: UCC2818DWTRG4 is a high-performance current-mode PWM controller used in power supply applications.

  2. Q: What are the key features of UCC2818DWTRG4? A: Some key features include adjustable frequency, soft-start capability, cycle-by-cycle current limiting, and integrated error amplifier.

  3. Q: How does UCC2818DWTRG4 help in power supply designs? A: UCC2818DWTRG4 provides precise control over the power supply output voltage and current, ensuring stable and efficient operation.

  4. Q: Can UCC2818DWTRG4 be used in both AC-DC and DC-DC power supplies? A: Yes, UCC2818DWTRG4 can be used in both AC-DC and DC-DC power supply applications.

  5. Q: What is the maximum operating frequency of UCC2818DWTRG4? A: The maximum operating frequency of UCC2818DWTRG4 is typically around 1 MHz.

  6. Q: Does UCC2818DWTRG4 have built-in protection features? A: Yes, UCC2818DWTRG4 has various built-in protection features like overvoltage protection, undervoltage lockout, and thermal shutdown.

  7. Q: Can UCC2818DWTRG4 operate in a wide input voltage range? A: Yes, UCC2818DWTRG4 can operate in a wide input voltage range, typically from 9V to 30V.

  8. Q: How does UCC2818DWTRG4 handle load transient response? A: UCC2818DWTRG4 has a fast transient response capability, ensuring stable output voltage even during sudden load changes.

  9. Q: Can UCC2818DWTRG4 be used in battery charging applications? A: Yes, UCC2818DWTRG4 can be used in battery charging applications by controlling the charging current and voltage.

  10. Q: Are there any application notes or reference designs available for UCC2818DWTRG4? A: Yes, Texas Instruments provides application notes and reference designs that help in implementing UCC2818DWTRG4 in various power supply designs.

Please note that the answers provided here are general and may vary depending on specific design requirements and application scenarios.