Texas Instruments
Bild kan vara representation.
Se specifikationer för produktinformation.
UCC2818DWTR
Visa detalj Datablad

UCC2818DWTR

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High-performance PWM Controller
  • Package: SOIC-16
  • Essence: Regulates and controls power delivery in various applications
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 30V
  • Output Voltage Range: 0.8V to 7.5V
  • Operating Temperature Range: -40°C to 85°C
  • Switching Frequency: Up to 1MHz
  • Duty Cycle Range: 0% to 100%
  • Output Current: Up to 1A
  • Error Amplifier Bandwidth: 10MHz
  • Soft Start Time: Adjustable

Detailed Pin Configuration

The UCC2818DWTR has a total of 16 pins arranged as follows:

  1. COMP: Compensation pin for error amplifier feedback.
  2. FB: Feedback pin for output voltage regulation.
  3. CS: Current sense input pin for current limit control.
  4. RT/CT: Timing resistor/capacitor connection pin for frequency control.
  5. VREF: Reference voltage output pin.
  6. GND: Ground pin.
  7. SS/TR: Soft start/timing capacitor connection pin.

  8. VCC: Supply voltage input pin.

  9. DRVH: High-side gate driver output pin.

  10. DRVL: Low-side gate driver output pin.
  11. HO: High-side MOSFET output pin.
  12. LO: Low-side MOSFET output pin.
  13. NC: No connection pin.
  14. NC: No connection pin.
  15. NC: No connection pin.
  16. NC: No connection pin.

Functional Features

  • High-performance PWM controller for power management applications.
  • Wide input voltage range allows for versatile use.
  • Adjustable soft start time for controlled power-up sequencing.
  • Error amplifier with high bandwidth ensures accurate regulation.
  • Current sense input enables precise current limit control.
  • Integrated gate drivers simplify the design and reduce external components.

Advantages and Disadvantages

Advantages: - Wide input voltage range provides flexibility in various applications. - High-performance PWM controller ensures efficient power management. - Adjustable soft start time allows for controlled power-up sequencing. - Integrated gate drivers simplify the design and reduce external components.

Disadvantages: - Limited output current capability (up to 1A). - Operating temperature range may not be suitable for extreme environments.

Working Principles

The UCC2818DWTR is a pulse-width modulation (PWM) controller that regulates and controls power delivery in various applications. It operates by comparing the feedback voltage from the FB pin with a reference voltage from the VREF pin. The error amplifier amplifies the difference between these voltages and adjusts the duty cycle of the PWM signal accordingly.

The CS pin senses the current flowing through the power MOSFETs and provides feedback for current limit control. The RT/CT pin sets the switching frequency by connecting an external timing resistor and capacitor. The soft start function gradually increases the duty cycle during power-up, preventing excessive inrush current.

The integrated gate drivers provide the necessary drive signals to control the high-side and low-side MOSFETs. This eliminates the need for additional external driver circuits, simplifying the overall design.

Detailed Application Field Plans

The UCC2818DWTR is widely used in various power management applications, including:

  1. Switching Power Supplies: It can be used as the primary controller in AC-DC and DC-DC converters, providing efficient power conversion and regulation.
  2. LED Lighting: The UCC2818DWTR can drive LED drivers, ensuring precise current control and dimming capabilities.
  3. Battery Chargers: It can be employed in battery charging circuits, enabling efficient and controlled charging of batteries.
  4. Motor Control: The UCC2818DWTR is suitable for motor control applications, providing accurate speed and torque control.

Detailed and Complete Alternative Models

  1. UCC2818ADWTR: Similar to UCC2818DWTR but available in a different package (SOIC-16).
  2. UCC2818AN: DIP-16 package variant of UCC2818DWTR.
  3. UCC3818DWTR: Enhanced version with additional features and improved performance.
  4. UCC2819DWTR: Dual-channel PWM controller for multi-phase power management applications.

These alternative models offer similar functionality and can be considered as substitutes for the UCC2818DWTR depending on specific requirements.

In conclusion, the UCC2818DWTR is a high-performance PWM controller used in power management applications. Its wide input voltage range, adjustable soft start time, and integrated gate drivers make it a versatile choice for various designs. While it has limitations in output current capability and operating temperature range

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av UCC2818DWTR i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of UCC2818DWTR in technical solutions:

  1. Q: What is UCC2818DWTR? A: UCC2818DWTR is a pulse width modulation (PWM) controller IC used for controlling power converters in various applications.

  2. Q: What are the key features of UCC2818DWTR? A: Some key features include adjustable frequency, soft-start capability, cycle-by-cycle current limiting, and overvoltage protection.

  3. Q: What types of power converters can UCC2818DWTR be used in? A: UCC2818DWTR can be used in various power converters such as buck converters, boost converters, flyback converters, and forward converters.

  4. Q: How does UCC2818DWTR help in achieving efficient power conversion? A: UCC2818DWTR provides precise control over the switching frequency and duty cycle, allowing for efficient power transfer and regulation.

  5. Q: Can UCC2818DWTR handle high voltage applications? A: Yes, UCC2818DWTR has a wide input voltage range and can handle high voltage applications up to a certain limit specified in the datasheet.

  6. Q: Does UCC2818DWTR have any protection features? A: Yes, UCC2818DWTR has built-in protection features like overvoltage protection, undervoltage lockout, and thermal shutdown to ensure safe operation.

  7. Q: How can I adjust the output voltage using UCC2818DWTR? A: The output voltage can be adjusted by changing the feedback resistors connected to the error amplifier input pin of UCC2818DWTR.

  8. Q: Can UCC2818DWTR operate in a wide temperature range? A: Yes, UCC2818DWTR is designed to operate in a wide temperature range, typically from -40°C to 125°C.

  9. Q: What is the maximum switching frequency supported by UCC2818DWTR? A: The maximum switching frequency supported by UCC2818DWTR is typically around 1 MHz, but it can vary depending on the specific application.

  10. Q: Are there any application notes or reference designs available for UCC2818DWTR? A: Yes, Texas Instruments provides application notes and reference designs that can help in understanding and implementing UCC2818DWTR in various technical solutions.

Please note that the answers provided here are general and may vary based on the specific requirements and datasheet of UCC2818DWTR.