Texas Instruments
Bild kan vara representation.
Se specifikationer för produktinformation.
TSV912AIPWR
Visa detalj Datablad

TSV912AIPWR

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Amplifier
  • Characteristics: Low-power, rail-to-rail input/output, single-supply voltage operation
  • Package: SOT-23-5
  • Essence: Operational amplifier
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Supply Voltage Range: 2.7V to 5.5V
  • Input Offset Voltage: ±1mV (maximum)
  • Gain Bandwidth Product: 10MHz (typical)
  • Slew Rate: 3.5V/µs (typical)
  • Quiescent Current: 1.4mA (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The TSV912AIPWR has a total of 5 pins arranged as follows: 1. V- (Negative Power Supply) 2. V+ (Positive Power Supply) 3. OUT (Output) 4. IN- (Inverting Input) 5. IN+ (Non-Inverting Input)

Functional Features

  • Rail-to-rail input and output capability allows the amplifier to operate with signals that are close to the supply rails.
  • Low-power consumption makes it suitable for battery-powered applications.
  • Single-supply voltage operation simplifies circuit design and reduces component count.

Advantages and Disadvantages

Advantages: - Wide supply voltage range enables compatibility with various power sources. - High gain bandwidth product ensures accurate amplification of high-frequency signals. - Small package size (SOT-23-5) facilitates space-constrained designs.

Disadvantages: - Limited output current capability may restrict its use in certain applications requiring higher current drive. - Relatively high input offset voltage may affect precision applications.

Working Principles

The TSV912AIPWR is an operational amplifier that amplifies the difference between its two input voltages. It operates by using a feedback mechanism to adjust the output voltage based on the input signals. The rail-to-rail input/output capability allows it to handle signals that span the entire supply voltage range.

Detailed Application Field Plans

The TSV912AIPWR is commonly used in various applications, including: - Portable audio devices - Sensor signal conditioning - Battery-powered instrumentation - Active filters - Signal amplification in communication systems

Detailed and Complete Alternative Models

  1. TSV911AIPWR: Similar specifications but with a lower gain bandwidth product of 5MHz.
  2. TSV913AIPWR: Similar specifications but with a higher gain bandwidth product of 20MHz.
  3. TSV914AIPWR: Similar specifications but with quad-channel configuration.

Note: These alternative models provide options with different performance characteristics to suit specific application requirements.

Word count: 314 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av TSV912AIPWR i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of TSV912AIPWR in technical solutions:

  1. Q: What is TSV912AIPWR? A: TSV912AIPWR is a low-power, rail-to-rail input/output operational amplifier (op-amp) designed for various applications in technical solutions.

  2. Q: What is the supply voltage range for TSV912AIPWR? A: The supply voltage range for TSV912AIPWR is typically between 1.8V and 5.5V.

  3. Q: What is the typical gain bandwidth product (GBW) of TSV912AIPWR? A: The typical GBW of TSV912AIPWR is around 4 MHz.

  4. Q: Can TSV912AIPWR operate with a single power supply? A: Yes, TSV912AIPWR can operate with a single power supply, making it suitable for battery-powered applications.

  5. Q: What is the input offset voltage of TSV912AIPWR? A: The input offset voltage of TSV912AIPWR is typically around 1 mV.

  6. Q: Is TSV912AIPWR capable of driving capacitive loads? A: Yes, TSV912AIPWR has a high output current capability, allowing it to drive capacitive loads up to 100 pF.

  7. Q: Can TSV912AIPWR be used in precision applications? A: Yes, TSV912AIPWR offers low input bias current and low input offset voltage, making it suitable for precision applications.

  8. Q: What is the temperature range for TSV912AIPWR? A: TSV912AIPWR can operate within a temperature range of -40°C to +125°C.

  9. Q: Does TSV912AIPWR have built-in protection features? A: Yes, TSV912AIPWR includes built-in features like short-circuit protection and thermal shutdown to ensure safe operation.

  10. Q: What are some common applications for TSV912AIPWR? A: TSV912AIPWR is commonly used in battery-powered devices, sensor interfaces, portable instrumentation, audio amplification, and other low-power applications.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.