Texas Instruments
Bild kan vara representation.
Se specifikationer för produktinformation.
TS5A23167DCURE4
Visa detalj Datablad

TS5A23167DCURE4

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Analog Switch
  • Characteristics: Low ON-State Resistance, Low Charge Injection, Wide Voltage Range
  • Package: VQFN (Very Thin Quad Flat No-Lead) 10-pin package
  • Essence: High-performance analog switch for signal routing applications
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on customer requirements

Specifications

  • Supply Voltage Range: 1.65V to 5.5V
  • ON-State Resistance: 0.6Ω (typical)
  • Charge Injection: 0.3pC (typical)
  • Bandwidth: 200MHz (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The TS5A23167DCURE4 has a total of 10 pins: 1. Pin 1: IN1 - Input 1 2. Pin 2: IN2 - Input 2 3. Pin 3: COM - Common Terminal 4. Pin 4: NO - Normally Open Terminal 5. Pin 5: NC - Normally Closed Terminal 6. Pin 6: GND - Ground 7. Pin 7: VCC - Power Supply 8. Pin 8: EN - Enable Control 9. Pin 9: SDA - Serial Data Input/Output 10. Pin 10: SCL - Serial Clock Input

Functional Features

  • Low ON-State Resistance ensures minimal signal distortion and voltage drop across the switch.
  • Low Charge Injection minimizes unwanted charge transfer between channels during switching.
  • Wide Voltage Range allows compatibility with various signal levels.
  • Fast Switching Speed enables seamless signal routing without noticeable delays.

Advantages and Disadvantages

Advantages: - High-performance analog switch with low ON-State Resistance and charge injection. - Wide voltage range allows for versatile applications. - Fast switching speed ensures efficient signal routing.

Disadvantages: - Limited number of channels (single-pole, double-throw configuration). - Not suitable for high-power applications due to its small package size.

Working Principles

The TS5A23167DCURE4 is an analog switch that operates based on the control signal received at the EN pin. When the EN pin is high, the switch is turned ON, allowing the signal to pass from the IN1 or IN2 input to the COM terminal. When the EN pin is low, the switch is turned OFF, isolating the IN1 and IN2 inputs from the COM terminal.

Detailed Application Field Plans

The TS5A23167DCURE4 is commonly used in various applications, including: 1. Audio Systems: Signal routing in audio mixers, amplifiers, and headphones. 2. Communication Devices: Signal switching in telecommunication equipment, routers, and modems. 3. Test and Measurement Instruments: Channel selection and signal routing in oscilloscopes, data loggers, and function generators. 4. Industrial Automation: Signal routing in PLCs (Programmable Logic Controllers), motor control systems, and industrial sensors.

Detailed and Complete Alternative Models

  1. TS5A23166DCURE4: Similar specifications and features, but with a different pin configuration.
  2. TS5A23168DCURE4: Higher voltage rating and additional channels for more complex signal routing requirements.
  3. TS5A23169DCURE4: Lower ON-State Resistance and improved charge injection performance for higher precision applications.

(Note: The alternative models listed above are just examples and not an exhaustive list.)

This entry provides an overview of the TS5A23167DCURE4 analog switch, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av TS5A23167DCURE4 i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of TS5A23167DCURE4 in technical solutions:

  1. Q: What is TS5A23167DCURE4? A: TS5A23167DCURE4 is a specific model of analog switch IC (Integrated Circuit) manufactured by Texas Instruments.

  2. Q: What is the purpose of TS5A23167DCURE4? A: The purpose of TS5A23167DCURE4 is to provide signal routing and switching capabilities in various electronic systems.

  3. Q: What are the key features of TS5A23167DCURE4? A: Some key features of TS5A23167DCURE4 include low on-resistance, low power consumption, wide voltage range, and compatibility with different logic levels.

  4. Q: In which applications can TS5A23167DCURE4 be used? A: TS5A23167DCURE4 can be used in a wide range of applications such as audio/video systems, communication devices, industrial automation, and consumer electronics.

  5. Q: How does TS5A23167DCURE4 help in signal routing? A: TS5A23167DCURE4 allows for the selection of different input signals and their routing to desired output channels, enabling efficient signal management.

  6. Q: Can TS5A23167DCURE4 handle high-frequency signals? A: Yes, TS5A23167DCURE4 has a wide bandwidth and can handle high-frequency signals, making it suitable for applications requiring fast switching.

  7. Q: Is TS5A23167DCURE4 compatible with different voltage levels? A: Yes, TS5A23167DCURE4 supports a wide voltage range, allowing it to work with various voltage levels commonly found in electronic systems.

  8. Q: How can TS5A23167DCURE4 be controlled? A: TS5A23167DCURE4 can be controlled using digital signals, such as logic-level inputs, to select the desired signal path.

  9. Q: Does TS5A23167DCURE4 offer protection against overvoltage or short circuits? A: Yes, TS5A23167DCURE4 provides built-in protection features like overvoltage protection and short-circuit current limiting to safeguard the device and connected components.

  10. Q: Where can I find more information about TS5A23167DCURE4's specifications and application notes? A: You can refer to the datasheet provided by Texas Instruments for detailed specifications and application notes related to TS5A23167DCURE4.