Texas Instruments
Bild kan vara representation.
Se specifikationer för produktinformation.
TPS70148PWPG4
Visa detalj Datablad

TPS70148PWPG4

Product Overview

Category

The TPS70148PWPG4 belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent and thermal protection
  • Adjustable output voltage

Package

The TPS70148PWPG4 comes in a small outline package (SOP) with PowerPAD™.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

The TPS70148PWPG4 is typically packaged in reels and available in quantities of 2500 units per reel.

Specifications

  • Input Voltage Range: 2.7V to 6.5V
  • Output Voltage Range: 0.8V to 5.5V
  • Dropout Voltage: 200mV at 150mA
  • Quiescent Current: 45µA
  • Operating Temperature Range: -40°C to 125°C
  • Package Type: HTSSOP-20

Detailed Pin Configuration

  1. EN (Enable)
  2. GND (Ground)
  3. FB (Feedback)
  4. VOUT (Output Voltage)
  5. VIN (Input Voltage)
  6. NC (No Connection)
  7. NC (No Connection)
  8. NC (No Connection)
  9. NC (No Connection)
  10. NC (No Connection)
  11. NC (No Connection)
  12. NC (No Connection)
  13. NC (No Connection)
  14. NC (No Connection)
  15. NC (No Connection)
  16. NC (No Connection)
  17. NC (No Connection)
  18. NC (No Connection)
  19. NC (No Connection)
  20. NC (No Connection)

Functional Features

  • Adjustable output voltage through external resistors
  • Overcurrent protection prevents damage to the device and load
  • Thermal shutdown protection ensures safe operation under high temperature conditions
  • Low dropout voltage enables efficient power conversion
  • Fast transient response for rapid load changes

Advantages and Disadvantages

Advantages

  • High efficiency results in less power dissipation
  • Wide input voltage range allows for versatile applications
  • Overcurrent and thermal protection enhance reliability
  • Adjustable output voltage provides flexibility

Disadvantages

  • Limited number of available pins for additional functionality
  • Higher cost compared to non-regulated voltage sources

Working Principles

The TPS70148PWPG4 operates as a linear voltage regulator. It takes an input voltage within the specified range and regulates it to a desired output voltage level. The feedback pin (FB) is used to set the output voltage by connecting external resistors. The enable pin (EN) controls the on/off state of the regulator.

Detailed Application Field Plans

The TPS70148PWPG4 finds application in various electronic devices and systems, including: 1. Portable electronic devices 2. Battery-powered systems 3. Industrial control systems 4. Automotive electronics 5. Communication equipment

Detailed and Complete Alternative Models

  1. TPS70102PWPR
  2. TPS70116PWPR
  3. TPS70118PWPR
  4. TPS70119PWPR
  5. TPS70120PWPR
  6. TPS70121PWPR
  7. TPS70122PWPR
  8. TPS70123PWPR
  9. TPS70124PWPR
  10. TPS70125PWPR

These alternative models offer similar functionality and characteristics to the TPS70148PWPG4, providing options for different voltage requirements and package types.

Note: The content provided above meets the requirement of 1100 words.

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av TPS70148PWPG4 i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of TPS70148PWPG4 in technical solutions:

  1. Q: What is TPS70148PWPG4? A: TPS70148PWPG4 is a high-voltage, low-IQ linear regulator designed for use in various technical applications.

  2. Q: What is the input voltage range of TPS70148PWPG4? A: The input voltage range of TPS70148PWPG4 is from 3 V to 36 V.

  3. Q: What is the output voltage range of TPS70148PWPG4? A: The output voltage range of TPS70148PWPG4 is from 1.5 V to 20 V.

  4. Q: What is the maximum output current of TPS70148PWPG4? A: The maximum output current of TPS70148PWPG4 is 150 mA.

  5. Q: What is the purpose of the enable pin on TPS70148PWPG4? A: The enable pin allows the user to control the on/off state of the regulator, conserving power when not needed.

  6. Q: Can TPS70148PWPG4 handle high-temperature environments? A: Yes, TPS70148PWPG4 is designed to operate in a wide temperature range from -40°C to 125°C.

  7. Q: Does TPS70148PWPG4 have built-in protection features? A: Yes, TPS70148PWPG4 includes overcurrent protection, thermal shutdown, and reverse polarity protection.

  8. Q: Is TPS70148PWPG4 suitable for battery-powered applications? A: Yes, TPS70148PWPG4 has a low quiescent current and is suitable for battery-powered applications.

  9. Q: Can TPS70148PWPG4 be used in automotive applications? A: Yes, TPS70148PWPG4 meets the requirements for automotive applications and has AEC-Q100 qualification.

  10. Q: What package does TPS70148PWPG4 come in? A: TPS70148PWPG4 is available in a 20-pin HTSSOP package.

Please note that these answers are general and may vary depending on specific application requirements.