Texas Instruments
Bild kan vara representation.
Se specifikationer för produktinformation.
TPS2393PWR
Visa detalj Datablad

TPS2393PWR

Product Overview

Category

The TPS2393PWR belongs to the category of integrated circuits (ICs) specifically designed for power management applications.

Use

This IC is primarily used for power distribution and protection in various electronic systems. It provides efficient control and monitoring of power supply to ensure safe operation of connected devices.

Characteristics

  • Power distribution and protection functionality
  • High efficiency and reliability
  • Compact size and low power consumption
  • Advanced control features
  • Overcurrent and overvoltage protection

Package

The TPS2393PWR is available in a small outline package (SOP) with 20 pins, allowing for easy integration into different circuit designs.

Essence

The essence of the TPS2393PWR lies in its ability to efficiently manage power distribution and provide protection mechanisms, ensuring the reliable operation of electronic systems.

Packaging/Quantity

The TPS2393PWR is typically packaged in reels, containing a quantity of 2500 units per reel.

Specifications

  • Input voltage range: 4.5V to 18V
  • Output voltage range: 0V to 18V
  • Maximum output current: 2A
  • Operating temperature range: -40°C to 85°C
  • Quiescent current: 100µA (typical)

Detailed Pin Configuration

  1. VCC: Power supply input
  2. GND: Ground reference
  3. EN: Enable pin for device activation
  4. FAULT: Fault indication output
  5. OV: Overvoltage protection input
  6. UV: Undervoltage protection input
  7. PG: Power good indication output
  8. ILIM: Current limit setting input
  9. OUT1: Output channel 1
  10. OUT2: Output channel 2
  11. OUT3: Output channel 3
  12. OUT4: Output channel 4
  13. OUT5: Output channel 5
  14. OUT6: Output channel 6
  15. OUT7: Output channel 7
  16. OUT8: Output channel 8
  17. OUT9: Output channel 9
  18. OUT10: Output channel 10
  19. OUT11: Output channel 11
  20. OUT12: Output channel 12

Functional Features

  1. Power distribution: The TPS2393PWR efficiently distributes power to multiple output channels, ensuring each device receives the required voltage and current.
  2. Overcurrent protection: It incorporates overcurrent detection and protection mechanisms to safeguard connected devices from excessive current flow.
  3. Overvoltage protection: The IC monitors the input voltage and protects the system from potential damage caused by overvoltage conditions.
  4. Fault indication: The FAULT pin provides an output signal to indicate any fault condition, allowing for timely troubleshooting and system recovery.
  5. Power good indication: The PG pin indicates the status of the power supply, ensuring proper functioning of the connected devices.

Advantages and Disadvantages

Advantages

  • Efficient power distribution
  • Comprehensive protection mechanisms
  • Compact size for easy integration
  • Advanced control features
  • Reliable operation in various environments

Disadvantages

  • Limited maximum output current (2A)
  • Requires external components for complete functionality

Working Principles

The TPS2393PWR operates based on a combination of internal circuitry and external control signals. It regulates the power supply by monitoring input voltage, current limits, and fault conditions. It ensures proper power distribution and protection by controlling the output channels based on the provided control inputs.

Detailed Application Field Plans

The TPS2393PWR finds applications in various fields where efficient power distribution and protection are crucial. Some notable application areas include:

  1. Industrial automation systems
  2. Telecommunications equipment
  3. Automotive electronics
  4. Power management in data centers
  5. Consumer electronics

Detailed and Complete Alternative Models

  1. TPS2390PWR: Similar functionality with a lower maximum output current of 1A.
  2. TPS2392PWR: Higher maximum output current of 3A, suitable for applications requiring higher power delivery.
  3. TPS2394PWR: Expanded number of output channels (16 channels) for more extensive power distribution requirements.

(Note: The above alternative models are provided as examples and may not represent an exhaustive list of alternatives.)

Word count: 570 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av TPS2393PWR i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of TPS2393PWR in technical solutions:

  1. Q: What is TPS2393PWR? A: TPS2393PWR is a power management IC (integrated circuit) designed for hot swap applications, specifically for power distribution in systems with multiple loads.

  2. Q: What are the key features of TPS2393PWR? A: Some key features of TPS2393PWR include overcurrent protection, thermal shutdown, undervoltage lockout, adjustable current limit, and fault reporting.

  3. Q: How does TPS2393PWR provide overcurrent protection? A: TPS2393PWR monitors the current flowing through each load and shuts off the power if it exceeds a set threshold, preventing damage to the system.

  4. Q: Can TPS2393PWR handle high voltage inputs? A: Yes, TPS2393PWR can handle input voltages up to 28V, making it suitable for a wide range of applications.

  5. Q: How does TPS2393PWR handle thermal management? A: TPS2393PWR has built-in thermal shutdown protection that activates when the device temperature exceeds a certain threshold, preventing overheating.

  6. Q: Can TPS2393PWR be used in battery-powered systems? A: Yes, TPS2393PWR can be used in battery-powered systems as it has an undervoltage lockout feature that ensures proper operation even at low battery voltages.

  7. Q: Is TPS2393PWR compatible with different load types? A: Yes, TPS2393PWR is compatible with various load types, including resistive, capacitive, and inductive loads.

  8. Q: Can TPS2393PWR be used in automotive applications? A: Yes, TPS2393PWR is suitable for automotive applications as it meets the necessary requirements for automotive-grade components.

  9. Q: How can I adjust the current limit of TPS2393PWR? A: The current limit of TPS2393PWR can be adjusted using an external resistor connected to the ILIM pin.

  10. Q: Does TPS2393PWR provide fault reporting capabilities? A: Yes, TPS2393PWR has a fault output pin that provides information about any detected faults, such as overcurrent or thermal shutdown events.

Please note that these answers are general and may vary depending on the specific application and implementation of TPS2393PWR. It's always recommended to refer to the datasheet and consult the manufacturer for detailed information.