Category: Integrated Circuits (ICs)
Use: Voltage Supervisors
Characteristics: - Low Power Consumption - Wide Supply Voltage Range - Adjustable Threshold Voltage - Small Package Size - High Accuracy
Package: SOT-23-5
Essence: The TLV810SDBZT is a voltage supervisor IC that monitors the power supply voltage of a system and provides a reset signal to the microcontroller or other digital devices when the voltage falls below a certain threshold.
Packaging/Quantity: The TLV810SDBZT is available in a tape and reel packaging, with 3000 units per reel.
The TLV810SDBZT has a total of 5 pins:
Advantages: - Accurate and reliable voltage monitoring - Adjustable threshold voltage - Low power consumption - Small package size - Wide supply voltage range
Disadvantages: - Limited number of threshold voltage options
The TLV810SDBZT operates by comparing the supply voltage with the selected threshold voltage. When the supply voltage falls below the threshold, the reset output is activated, indicating a power failure or an out-of-range condition. The reset output remains active until the supply voltage rises above the threshold again.
The TLV810SDBZT is widely used in various electronic systems where reliable voltage monitoring is crucial. Some common application fields include:
These alternative models provide similar voltage supervision capabilities and can be considered as alternatives to the TLV810SDBZT based on specific application requirements.
Word count: 530 words
Sure! Here are 10 common questions and answers related to the application of TLV810SDBZT in technical solutions:
Q: What is TLV810SDBZT? A: TLV810SDBZT is a low-power voltage supervisor IC that monitors the supply voltage of a system and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of TLV810SDBZT? A: The TLV810SDBZT operates within a voltage range of 0.7V to 6V.
Q: What is the typical quiescent current consumption of TLV810SDBZT? A: The typical quiescent current consumption of TLV810SDBZT is around 1.5µA.
Q: Can TLV810SDBZT be used in battery-powered applications? A: Yes, TLV810SDBZT is suitable for battery-powered applications due to its low quiescent current consumption.
Q: What is the purpose of the reset output of TLV810SDBZT? A: The reset output of TLV810SDBZT is used to initiate a system reset when the monitored voltage falls below the specified threshold.
Q: How accurate is the voltage threshold of TLV810SDBZT? A: The voltage threshold accuracy of TLV810SDBZT is typically ±1.5%.
Q: Can TLV810SDBZT tolerate voltage transients or noise on the supply line? A: Yes, TLV810SDBZT has built-in hysteresis to filter out voltage transients and noise on the supply line.
Q: What is the maximum reset timeout period of TLV810SDBZT? A: The maximum reset timeout period of TLV810SDBZT is typically 200ms.
Q: Can TLV810SDBZT be used in automotive applications? A: Yes, TLV810SDBZT is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.
Q: Does TLV810SDBZT have any built-in protection features? A: Yes, TLV810SDBZT has built-in overvoltage and undervoltage lockout protection to ensure reliable operation of the system.
Please note that these answers are general and may vary depending on the specific datasheet and application requirements.