Texas Instruments
Bild kan vara representation.
Se specifikationer för produktinformation.
TL16C2752FNR
Visa detalj Datablad

TL16C2752FNR

Product Overview

Category

The TL16C2752FNR belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for data communication and control purposes.

Characteristics

  • High-speed data transmission capabilities
  • Low power consumption
  • Compact size
  • Reliable performance

Package

The TL16C2752FNR is available in a small form factor package, typically a plastic quad flat package (PQFP).

Essence

The essence of TL16C2752FNR lies in its ability to facilitate efficient and reliable data communication within electronic systems.

Packaging/Quantity

The IC is usually packaged in reels or trays, with a typical quantity of 250 units per reel/tray.

Specifications

  • Data transmission rate: Up to 1 Mbps
  • Supply voltage range: 3.3V - 5V
  • Operating temperature range: -40°C to +85°C
  • Number of pins: 48
  • Communication protocol support: UART (Universal Asynchronous Receiver Transmitter)

Detailed Pin Configuration

The TL16C2752FNR has a total of 48 pins, each serving a specific purpose in the functioning of the IC. The pin configuration is as follows:

(Pin diagram here)

Functional Features

  • Dual-channel UART functionality
  • FIFO (First-In-First-Out) buffer for efficient data handling
  • Programmable baud rate generator
  • Interrupt capability for event-driven communication
  • Support for various data formats (e.g., 8-bit, 9-bit, etc.)
  • Flow control mechanisms (e.g., RTS/CTS)

Advantages and Disadvantages

Advantages

  • High-speed data transmission
  • Low power consumption
  • Compact size for space-constrained applications
  • Reliable performance in harsh environments

Disadvantages

  • Limited number of channels (dual-channel only)
  • May require additional components for complete system integration

Working Principles

The TL16C2752FNR operates based on the principles of UART communication. It receives and transmits data in a serial format, converting it into parallel form for internal processing. The IC utilizes a FIFO buffer to efficiently handle incoming and outgoing data, ensuring smooth and uninterrupted communication.

Detailed Application Field Plans

The TL16C2752FNR finds applications in various fields, including but not limited to:

  1. Industrial automation: Used for communication between control systems and peripheral devices.
  2. Telecommunications: Facilitates data transmission in networking equipment and modems.
  3. Automotive electronics: Enables communication between different electronic modules within vehicles.
  4. Consumer electronics: Integrated into devices like printers, scanners, and set-top boxes for data transfer.

Detailed and Complete Alternative Models

  1. TL16C2552FNR: Similar to TL16C2752FNR but with a single channel instead of dual-channel functionality.
  2. MAX3100: UART IC with similar features and capabilities.
  3. SC16C2552BIBS: Another alternative offering dual-channel UART functionality.

(Note: This list is not exhaustive and there are several other alternative models available in the market.)

In conclusion, the TL16C2752FNR is a versatile integrated circuit that enables efficient data communication in various electronic systems. Its high-speed transmission, low power consumption, and compact size make it suitable for a wide range of applications. However, its dual-channel limitation and potential need for additional components should be considered when selecting this IC for a specific project.

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av TL16C2752FNR i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of TL16C2752FNR in technical solutions:

  1. Q: What is TL16C2752FNR? A: TL16C2752FNR is a dual universal asynchronous receiver/transmitter (UART) integrated circuit that provides two full-duplex UART channels.

  2. Q: What is the operating voltage range for TL16C2752FNR? A: The operating voltage range for TL16C2752FNR is typically between 3.0V and 5.5V.

  3. Q: What is the maximum data rate supported by TL16C2752FNR? A: TL16C2752FNR supports a maximum data rate of up to 3 Mbps.

  4. Q: Can TL16C2752FNR be used with both RS-232 and RS-485 interfaces? A: Yes, TL16C2752FNR can be used with both RS-232 and RS-485 interfaces, making it versatile for various applications.

  5. Q: Does TL16C2752FNR support hardware flow control? A: Yes, TL16C2752FNR supports hardware flow control using RTS/CTS signals.

  6. Q: Is TL16C2752FNR compatible with microcontrollers and other digital systems? A: Yes, TL16C2752FNR is compatible with a wide range of microcontrollers and digital systems, making it suitable for integration into various designs.

  7. Q: Can TL16C2752FNR operate in low-power modes? A: Yes, TL16C2752FNR features low-power modes, allowing it to conserve energy when not actively transmitting or receiving data.

  8. Q: Are there any built-in error detection and correction mechanisms in TL16C2752FNR? A: Yes, TL16C2752FNR includes built-in error detection mechanisms such as parity checking and framing error detection.

  9. Q: Can TL16C2752FNR be used in industrial applications with harsh environments? A: Yes, TL16C2752FNR is designed to operate reliably in industrial environments with extended temperature ranges and robust ESD protection.

  10. Q: Are there any evaluation boards or development kits available for TL16C2752FNR? A: Yes, Texas Instruments provides evaluation boards and development kits that can be used to quickly prototype and test designs using TL16C2752FNR.

Please note that the answers provided here are general and may vary depending on specific implementation details and requirements. It is always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate information.