The SN74LVTH16374DLG4 has a total of 48 pins. The pin configuration is as follows:
Advantages: - Low-voltage operation allows for compatibility with modern electronic systems. - High-speed performance enables quick data transfer. - 3-state outputs provide flexibility in connecting multiple devices.
Disadvantages: - Limited operating temperature range (-40°C to 85°C). - Requires careful handling due to its small package size.
The SN74LVTH16374DLG4 works based on the principles of digital logic. It stores and transfers data using flip-flops, which are basic building blocks of sequential circuits. The clock input controls the timing of data storage and transfer
Sure! Here are 10 common questions and answers related to the application of SN74LVTH16374DLG4 in technical solutions:
Q: What is SN74LVTH16374DLG4? A: SN74LVTH16374DLG4 is a 16-bit D-type flip-flop with 3-state outputs, commonly used in digital logic circuits.
Q: What is the operating voltage range for SN74LVTH16374DLG4? A: The operating voltage range for SN74LVTH16374DLG4 is typically between 2.7V and 3.6V.
Q: What is the maximum clock frequency supported by SN74LVTH16374DLG4? A: SN74LVTH16374DLG4 can support clock frequencies up to 200 MHz.
Q: How many flip-flops are there in SN74LVTH16374DLG4? A: SN74LVTH16374DLG4 consists of 16 individual D-type flip-flops.
Q: What is the output drive strength of SN74LVTH16374DLG4? A: SN74LVTH16374DLG4 has a typical output drive strength of ±12 mA.
Q: Can SN74LVTH16374DLG4 be used in both parallel and serial data transfer applications? A: Yes, SN74LVTH16374DLG4 can be used in both parallel and serial data transfer applications.
Q: Does SN74LVTH16374DLG4 have internal pull-up or pull-down resistors? A: No, SN74LVTH16374DLG4 does not have internal pull-up or pull-down resistors.
Q: What is the power supply current consumption of SN74LVTH16374DLG4? A: The power supply current consumption of SN74LVTH16374DLG4 varies depending on the operating conditions, but it typically ranges from 2 mA to 20 mA.
Q: Can SN74LVTH16374DLG4 be used in high-speed data communication applications? A: Yes, SN74LVTH16374DLG4 is designed for high-speed operation and can be used in high-speed data communication applications.
Q: Is SN74LVTH16374DLG4 compatible with other logic families? A: Yes, SN74LVTH16374DLG4 is compatible with both TTL and CMOS logic families, making it versatile for various system designs.
Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.