Bild kan vara representation.
Se specifikationer för produktinformation.
SN74LVC2T45QDCURQ1

SN74LVC2T45QDCURQ1

Product Overview

  • Category: Integrated Circuit
  • Use: Level Shifter
  • Characteristics: Bi-directional voltage level translation with automatic direction sensing
  • Package: VSSOP (Very Small Outline Package)
  • Essence: Voltage level shifting between two different logic levels
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 1.65V to 5.5V
  • High-Level Input Voltage: 2V to VCC + 0.5V
  • Low-Level Input Voltage: -0.5V to 0.8V
  • High-Level Output Voltage: VCC - 0.5V
  • Low-Level Output Voltage: 0.5V
  • Maximum Operating Frequency: 100 MHz
  • Number of Pins: 8

Detailed Pin Configuration

  1. A1: Input/Output Pin A1
  2. GND: Ground
  3. A2: Input/Output Pin A2
  4. OE: Output Enable
  5. B2: Input/Output Pin B2
  6. VCC: Power Supply
  7. B1: Input/Output Pin B1
  8. VCCA: Power Supply for Side A

Functional Features

  • Bi-directional voltage level translation
  • Automatic direction sensing
  • Wide supply voltage range
  • High-speed operation
  • ESD protection on all pins
  • Low power consumption

Advantages

  • Allows interfacing between devices operating at different voltage levels
  • Simplifies system design by eliminating the need for additional level shifting components
  • Provides automatic direction sensing, reducing the complexity of control signals

Disadvantages

  • Limited maximum operating frequency compared to some other level shifters
  • May not be suitable for applications requiring very high-speed data transmission

Working Principles

The SN74LVC2T45QDCURQ1 is a level shifter integrated circuit that allows bidirectional voltage level translation between two different logic levels. It automatically senses the direction of data flow and adjusts the voltage levels accordingly. The device operates within a wide supply voltage range, making it suitable for various applications.

Detailed Application Field Plans

  • Interfacing between microcontrollers operating at different voltage levels
  • Level shifting in communication interfaces such as I2C, SPI, and UART
  • Voltage translation in battery-powered devices with varying power supply voltages

Detailed and Complete Alternative Models

  • SN74LVC2T45DCTR: Similar functionality but in a different package (TSSOP)
  • SN74LVC2T45DCKR: Similar functionality but in a different package (SC70)
  • SN74LVC2T45YZPR: Similar functionality but in a different package (DSBGA)

Note: This is not an exhaustive list of alternative models. Please refer to the manufacturer's documentation for a complete list of available options.

Total word count: 346 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av SN74LVC2T45QDCURQ1 i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of SN74LVC2T45QDCURQ1 in technical solutions:

1. What is the SN74LVC2T45QDCURQ1? - The SN74LVC2T45QDCURQ1 is a dual-bit, dual-supply voltage level translator with integrated circuitry to facilitate the translation of signals between different voltage domains.

2. What is the operating voltage range of SN74LVC2T45QDCURQ1? - The operating voltage range for SN74LVC2T45QDCURQ1 is from 1.65V to 5.5V.

3. How many channels does SN74LVC2T45QDCURQ1 have? - SN74LVC2T45QDCURQ1 has two independent bidirectional channels.

4. What is the maximum data rate supported by SN74LVC2T45QDCURQ1? - SN74LVC2T45QDCURQ1 supports a maximum data rate of 100 Mbps.

5. Can SN74LVC2T45QDCURQ1 be used for level shifting between different voltage domains? - Yes, SN74LVC2T45QDCURQ1 is specifically designed for level shifting between different voltage domains.

6. What is the typical propagation delay of SN74LVC2T45QDCURQ1? - The typical propagation delay of SN74LVC2T45QDCURQ1 is around 4.8 ns.

7. Does SN74LVC2T45QDCURQ1 support bi-directional communication? - Yes, SN74LVC2T45QDCURQ1 supports bi-directional communication, allowing bidirectional translation of signals.

8. Can SN74LVC2T45QDCURQ1 be used in automotive applications? - Yes, SN74LVC2T45QDCURQ1 is specifically designed for automotive applications and meets the AEC-Q100 automotive qualification requirements.

9. What is the package type of SN74LVC2T45QDCURQ1? - SN74LVC2T45QDCURQ1 is available in a small VSSOP-8 package.

10. Are there any special considerations when using SN74LVC2T45QDCURQ1? - It is important to ensure that the voltage levels and power supplies are within the specified operating range. Additionally, proper decoupling capacitors should be used to minimize noise and ensure stable operation.

Please note that these answers are general and may vary depending on the specific application and requirements.