Texas Instruments
Bild kan vara representation.
Se specifikationer för produktinformation.
SN74AHC14DR
Visa detalj Datablad

SN74AHC14DR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Inverter
  • Characteristics: High-speed, low-power, Schmitt-trigger input
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Hex Schmitt-Trigger Inverters
  • Packaging/Quantity: Tape and Reel, 2500 pieces per reel

Specifications

  • Supply Voltage Range: 2 V to 5.5 V
  • Input Voltage Range: 0 V to VCC
  • Output Voltage Range: 0 V to VCC
  • Maximum Operating Frequency: 50 MHz
  • Propagation Delay Time: 9 ns (typical)
  • Input Capacitance: 3.5 pF (typical)
  • Output Drive Capability: ±24 mA

Detailed Pin Configuration

The SN74AHC14DR has a total of 14 pins arranged as follows:

  1. Pin 1: Input A1
  2. Pin 2: Output Y1
  3. Pin 3: Input A2
  4. Pin 4: Output Y2
  5. Pin 5: Input A3
  6. Pin 6: Output Y3
  7. Pin 7: Ground (GND)
  8. Pin 8: Output Y4
  9. Pin 9: Input A4
  10. Pin 10: Output Y5
  11. Pin 11: Input A5
  12. Pin 12: Output Y6
  13. Pin 13: VCC (Supply Voltage)
  14. Pin 14: Input A6

Functional Features

  • Hex Schmitt-Trigger Inverters: The SN74AHC14DR consists of six independent inverters with Schmitt-trigger inputs. These inverters provide high noise immunity and are suitable for use in applications where signal integrity is crucial.
  • High-Speed Operation: With a maximum operating frequency of 50 MHz, the SN74AHC14DR ensures fast signal processing and response times.
  • Low Power Consumption: The IC operates within a supply voltage range of 2 V to 5.5 V, making it suitable for low-power applications.
  • Schmitt-Trigger Input: The Schmitt-trigger inputs allow the IC to tolerate slow input transition rates and provide hysteresis, ensuring stable output even in the presence of noise or signal distortion.

Advantages and Disadvantages

Advantages: - High noise immunity - Fast operation - Low power consumption - Stable output in the presence of noise or signal distortion

Disadvantages: - Limited output drive capability (±24 mA) - Restricted supply voltage range (2 V to 5.5 V)

Working Principles

The SN74AHC14DR operates as a hex inverter with Schmitt-trigger inputs. When an input signal transitions from low to high or high to low, the Schmitt-trigger circuitry ensures that the output switches cleanly and avoids false triggering caused by noise or signal distortion. This makes the IC highly reliable in applications where signal integrity is critical.

Detailed Application Field Plans

The SN74AHC14DR finds application in various fields, including:

  1. Digital Logic Circuits: The IC can be used in digital logic circuits to invert and process signals, enabling the design and implementation of complex digital systems.
  2. Communication Systems: It can be utilized in communication systems for signal conditioning, level shifting, and waveform shaping.
  3. Sensor Interfaces: The IC can interface with sensors by converting their output signals into inverted logic levels, facilitating further processing and analysis.
  4. Oscillator Circuits: It can be employed in oscillator circuits to generate square wave signals with precise timing characteristics.

Detailed and Complete Alternative Models

  1. SN74AHC14PW: This model has the same specifications and features as the SN74AHC14DR but comes in a TSSOP (Thin Shrink Small Outline Package) package.
  2. SN74LVC14ADR: This alternative model operates at a lower voltage range (1.65 V to 5.5 V) and offers similar functionality with Schmitt-trigger inputs.

These alternative models can be considered based on specific application requirements, package preferences, or voltage compatibility.

Word count: 536 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av SN74AHC14DR i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of SN74AHC14DR in technical solutions:

  1. Q: What is SN74AHC14DR? A: SN74AHC14DR is a hex inverter with Schmitt-trigger inputs, which means it can convert low-level signals to high-level signals and vice versa.

  2. Q: What is the voltage supply range for SN74AHC14DR? A: The voltage supply range for SN74AHC14DR is typically between 2V and 5.5V.

  3. Q: Can SN74AHC14DR be used in both digital and analog circuits? A: No, SN74AHC14DR is primarily designed for digital circuits and is not recommended for use in analog applications.

  4. Q: What is the maximum operating frequency of SN74AHC14DR? A: The maximum operating frequency of SN74AHC14DR is typically around 50 MHz.

  5. Q: How many inverters are there in SN74AHC14DR? A: SN74AHC14DR consists of six independent inverters in a single package.

  6. Q: Can SN74AHC14DR be used as a level shifter? A: Yes, SN74AHC14DR can be used as a level shifter to convert signals between different voltage levels.

  7. Q: What is the purpose of the Schmitt-trigger inputs in SN74AHC14DR? A: The Schmitt-trigger inputs in SN74AHC14DR help improve noise immunity and provide hysteresis, making it more resistant to signal fluctuations.

  8. Q: Is SN74AHC14DR suitable for high-speed applications? A: While SN74AHC14DR can operate at relatively high frequencies, it may not be the best choice for very high-speed applications due to its propagation delay.

  9. Q: Can SN74AHC14DR drive capacitive loads? A: Yes, SN74AHC14DR has a relatively high output current capability, allowing it to drive small capacitive loads without issues.

  10. Q: What are some common applications of SN74AHC14DR? A: SN74AHC14DR is commonly used in applications such as signal conditioning, level shifting, clock generation, and noise filtering in digital circuits.

Please note that these answers are general and may vary depending on specific use cases and requirements.