Texas Instruments
Bild kan vara representation.
Se specifikationer för produktinformation.
SN74ABTH162460DL
Visa detalj Datablad

SN74ABTH162460DL

Product Overview

  • Category: Integrated Circuit
  • Use: Data Buffer/Driver
  • Characteristics: High-speed, low-power, 16-bit bus transceiver with 3-state outputs
  • Package: TSSOP (Thin Shrink Small Outline Package)
  • Essence: Provides bidirectional buffering and line driving for a 16-bit data bus
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 2.3V to 3.6V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Output Drive Capability: ±12mA
  • Propagation Delay Time: 1.5ns (typical)

Detailed Pin Configuration

The SN74ABTH162460DL has a total of 56 pins. The pin configuration is as follows:

  1. OE1 (Output Enable Input 1)
  2. A1-A16 (Data Bus Inputs/Outputs)
  3. GND (Ground)
  4. B1-B16 (Data Bus Inputs/Outputs)
  5. VCC (Power Supply)
  6. OE2 (Output Enable Input 2)
  7. Y1-Y16 (Data Bus Outputs)
  8. GND (Ground)
  9. Y17-Y32 (Data Bus Outputs)
  10. GND (Ground)
  11. Y33-Y48 (Data Bus Outputs)
  12. GND (Ground)
  13. Y49-Y64 (Data Bus Outputs)

Functional Features

  • Bidirectional data flow
  • 3-state outputs allow multiple devices to share the same bus
  • High-speed operation for efficient data transfer
  • Low power consumption for energy efficiency
  • ESD protection on all inputs and outputs

Advantages and Disadvantages

Advantages: - High-speed operation enables fast data transfer - Low power consumption reduces energy usage - 3-state outputs allow for efficient bus sharing - ESD protection ensures device reliability

Disadvantages: - Limited output drive capability may not be suitable for high-current applications - Restricted supply voltage range limits compatibility with certain systems

Working Principles

The SN74ABTH162460DL is designed to provide bidirectional buffering and line driving for a 16-bit data bus. It allows data to flow in both directions, enabling communication between different devices connected to the bus. The 3-state outputs enable multiple devices to share the same bus without interfering with each other. The integrated circuit operates at high speed while consuming low power, making it suitable for various applications.

Detailed Application Field Plans

The SN74ABTH162460DL can be used in a wide range of applications, including:

  1. Computer systems: Facilitating data transfer between different components such as memory modules, processors, and peripherals.
  2. Communication equipment: Enabling data exchange between network interfaces, routers, and switches.
  3. Industrial automation: Providing reliable data transmission in control systems, PLCs (Programmable Logic Controllers), and motor drives.
  4. Automotive electronics: Supporting communication between various electronic modules in vehicles, such as infotainment systems and engine control units.
  5. Consumer electronics: Allowing data transfer between different devices like smartphones, tablets, and gaming consoles.

Detailed and Complete Alternative Models

  1. SN74ABT16245A: 16-bit bus transceiver with 3-state outputs, similar characteristics and package.
  2. SN74ABT16244A: 16-bit buffer/driver with 3-state outputs, compatible pin configuration and package.
  3. SN74ABT162601DL: 16-bit universal bus transceiver with 3-state outputs, enhanced features and performance.

These alternative models provide similar functionality to the SN74ABTH162460DL and can be considered as alternatives based on specific requirements.

Word count: 536 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av SN74ABTH162460DL i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of SN74ABTH162460DL:

  1. Q: What is SN74ABTH162460DL? A: SN74ABTH162460DL is a 16-bit bus transceiver with 3-state outputs, designed for high-performance applications.

  2. Q: What is the operating voltage range of SN74ABTH162460DL? A: The operating voltage range is typically between 2.3V and 3.6V.

  3. Q: What is the maximum data rate supported by SN74ABTH162460DL? A: SN74ABTH162460DL supports a maximum data rate of 200 MHz.

  4. Q: Can SN74ABTH162460DL be used in bidirectional data transfer applications? A: Yes, SN74ABTH162460DL can be used for bidirectional data transfer as it has separate input and output ports.

  5. Q: How many data lines can SN74ABTH162460DL handle? A: SN74ABTH162460DL can handle up to 16 data lines.

  6. Q: Does SN74ABTH162460DL have built-in ESD protection? A: Yes, SN74ABTH162460DL has built-in ESD protection to prevent damage from electrostatic discharge.

  7. Q: What is the typical propagation delay of SN74ABTH162460DL? A: The typical propagation delay is around 2.8 ns.

  8. Q: Can SN74ABTH162460DL be used in hot-swapping applications? A: Yes, SN74ABTH162460DL supports hot-swapping, allowing for easy replacement or insertion of devices without powering down the system.

  9. Q: Does SN74ABTH162460DL have any power-saving features? A: Yes, SN74ABTH162460DL has a low-power standby mode that reduces power consumption when not in use.

  10. Q: What is the package type of SN74ABTH162460DL? A: SN74ABTH162460DL is available in a 56-pin TSSOP (Thin Shrink Small Outline Package) package.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.