Texas Instruments
Bild kan vara representation.
Se specifikationer för produktinformation.
SN65C1168EPWRG4
Visa detalj Datablad

SN65C1168EPWRG4

Product Overview

  • Category: Integrated Circuit
  • Use: Signal Conditioning and Data Transmission
  • Characteristics: High-speed, Low-power, Wide Voltage Range
  • Package: TSSOP-14
  • Essence: Signal conditioning and data transmission IC
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 2.3V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Data Rate: Up to 1 Gbps
  • Number of Channels: 1
  • Input/Output Interface: LVDS
  • Power Consumption: 10 mW (typical)

Pin Configuration

The SN65C1168EPWRG4 has a TSSOP-14 package with the following pin configuration:

  1. VCC: Power supply voltage
  2. GND: Ground reference
  3. INP: Positive differential input
  4. INN: Negative differential input
  5. EN: Enable pin
  6. OUTN: Negative differential output
  7. OUTP: Positive differential output
  8. NC: No connection
  9. NC: No connection
  10. NC: No connection
  11. NC: No connection
  12. NC: No connection
  13. NC: No connection
  14. NC: No connection

Functional Features

  • High-speed LVDS interface for reliable data transmission
  • Low power consumption for energy-efficient operation
  • Wide voltage range allows compatibility with various systems
  • Differential inputs and outputs for noise immunity
  • Enable pin for easy control of the device

Advantages and Disadvantages

Advantages: - High-speed data transmission up to 1 Gbps - Low power consumption for energy efficiency - Wide voltage range for versatile applications - Noise immunity due to differential signaling

Disadvantages: - Limited number of channels (only 1) - TSSOP package may require careful handling during assembly

Working Principles

The SN65C1168EPWRG4 is designed to condition and transmit high-speed data signals using LVDS technology. It operates by receiving a differential input signal, conditioning it, and providing a differential output signal for further processing. The device ensures reliable data transmission by minimizing noise interference and providing a wide voltage range for compatibility with different systems.

Detailed Application Field Plans

The SN65C1168EPWRG4 finds applications in various fields, including:

  1. Industrial Automation: Used for data transmission in control systems, PLCs, and motor drives.
  2. Telecommunications: Enables high-speed data communication in networking equipment and routers.
  3. Automotive Electronics: Facilitates data transmission in automotive infotainment systems and driver assistance modules.
  4. Medical Devices: Supports reliable data transfer in medical imaging equipment and patient monitoring systems.
  5. Consumer Electronics: Used in high-speed data interfaces of smartphones, tablets, and gaming consoles.

Detailed and Complete Alternative Models

  1. SN65C1167EPWRG4: Similar to SN65C1168EPWRG4 but with two channels instead of one.
  2. SN65C1169EPWRG4: Enhanced version with higher data rate capability (up to 2 Gbps).
  3. SN65C1170EPWRG4: LVDS receiver IC with integrated equalization and pre-emphasis features.

These alternative models offer similar functionality and can be considered based on specific application requirements.

Word count: 320 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av SN65C1168EPWRG4 i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of SN65C1168EPWRG4 in technical solutions:

  1. Q: What is SN65C1168EPWRG4? A: SN65C1168EPWRG4 is a high-speed, low-power RS-485 transceiver designed for half-duplex communication in industrial applications.

  2. Q: What is the operating voltage range of SN65C1168EPWRG4? A: SN65C1168EPWRG4 operates from a single 3.3V power supply, making it suitable for low-power applications.

  3. Q: Can SN65C1168EPWRG4 be used in full-duplex communication? A: No, SN65C1168EPWRG4 is specifically designed for half-duplex communication only.

  4. Q: What is the maximum data rate supported by SN65C1168EPWRG4? A: SN65C1168EPWRG4 supports data rates up to 16 Mbps, making it suitable for high-speed industrial communication.

  5. Q: Does SN65C1168EPWRG4 have built-in protection features? A: Yes, SN65C1168EPWRG4 has built-in protection features such as thermal shutdown and short-circuit protection.

  6. Q: Can SN65C1168EPWRG4 be used in harsh industrial environments? A: Yes, SN65C1168EPWRG4 is designed to operate in harsh industrial environments with a wide temperature range and robust ESD protection.

  7. Q: What is the typical quiescent current consumption of SN65C1168EPWRG4? A: The typical quiescent current consumption of SN65C1168EPWRG4 is very low, typically around 1.5 mA.

  8. Q: Can SN65C1168EPWRG4 be used in multi-drop bus systems? A: Yes, SN65C1168EPWRG4 can be used in multi-drop bus systems with up to 32 nodes.

  9. Q: Does SN65C1168EPWRG4 support fail-safe biasing? A: Yes, SN65C1168EPWRG4 supports fail-safe biasing, ensuring that the receiver outputs a known state when the bus is idle.

  10. Q: What package options are available for SN65C1168EPWRG4? A: SN65C1168EPWRG4 is available in a small footprint, industry-standard 16-pin TSSOP package.