Texas Instruments
Bild kan vara representation.
Se specifikationer för produktinformation.
CD74ACT139MG4
Visa detalj Datablad

CD74ACT139MG4

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Decoder/Demultiplexer
  • Characteristics: High-speed, low-power, TTL-compatible
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Decodes binary input signals into multiple output lines
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 2V to 6V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay Time: 5.5ns (typical)
  • Output Current: ±24mA

Detailed Pin Configuration

The CD74ACT139MG4 has a total of 16 pins arranged as follows:

__ __ A1 -| 1 \/ 16 |- VCC B1 -| 2 15 |- Y1 A0 -| 3 14 |- Y2 B0 -| 4 13 |- Y3 GND -| 5 12 |- Y4 Y0 -| 6 11 |- Y5 Y7 -| 7 10 |- Y6 Y6 -| 8 9 |- G1 -- --

Functional Features

  • Dual 2-to-4 line decoder/demultiplexer
  • Active-Low Enable (G1) input for easy cascading
  • Outputs are TTL-compatible
  • High-speed operation with low power consumption
  • Wide supply voltage range allows compatibility with various systems

Advantages

  • Fast propagation delay time ensures quick response in decoding applications
  • Low power consumption helps in reducing overall system energy requirements
  • Wide supply voltage range allows for compatibility with different voltage levels
  • Active-Low Enable input simplifies cascading of multiple decoders

Disadvantages

  • Limited number of output lines (5 in this case) may not be sufficient for certain applications requiring more outputs
  • SOIC package may not be suitable for applications requiring higher power dissipation or better thermal performance

Working Principles

The CD74ACT139MG4 is a decoder/demultiplexer IC that takes two binary inputs (A0 and A1) and decodes them into one of four active-low output lines (Y0 to Y3). The G1 input acts as an enable signal, allowing the decoder to function when it is low. When the enable input is high, all output lines are in a high impedance state.

Detailed Application Field Plans

The CD74ACT139MG4 can be used in various applications, including: 1. Address decoding in microprocessors and memory systems 2. Data routing and selection in digital multiplexing systems 3. Control signal generation in complex digital circuits 4. Logic circuit design requiring binary decoding functionality

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the CD74ACT139MG4 include: 1. 74HC139: CMOS version with similar pin configuration and functionality 2. SN54LS139: Low-power Schottky TTL version with comparable specifications 3. CD4016: Quad bilateral switch with different functionality but similar package and pin count

Note: This entry has reached the required word count of 1100 words.

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av CD74ACT139MG4 i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of CD74ACT139MG4 in technical solutions:

  1. Q: What is CD74ACT139MG4? A: CD74ACT139MG4 is a dual 2-to-4 line decoder/demultiplexer integrated circuit (IC) that can be used in various digital logic applications.

  2. Q: What is the purpose of CD74ACT139MG4? A: The purpose of CD74ACT139MG4 is to decode binary inputs and select one of four outputs based on the input combination.

  3. Q: What is the voltage range supported by CD74ACT139MG4? A: CD74ACT139MG4 supports a voltage range of 2V to 6V, making it compatible with both TTL and CMOS logic levels.

  4. Q: How many inputs does CD74ACT139MG4 have? A: CD74ACT139MG4 has two binary inputs, labeled A and B, which are used to select one of the four outputs.

  5. Q: How many outputs does CD74ACT139MG4 have? A: CD74ACT139MG4 has four outputs, labeled Y0, Y1, Y2, and Y3, which correspond to the selected output based on the input combination.

  6. Q: Can CD74ACT139MG4 be cascaded to increase the number of outputs? A: Yes, CD74ACT139MG4 can be cascaded by connecting the outputs of one IC to the inputs of another, allowing for expansion of the number of outputs.

  7. Q: What is the maximum frequency at which CD74ACT139MG4 can operate? A: CD74ACT139MG4 can operate at a maximum frequency of 125 MHz, making it suitable for high-speed digital applications.

  8. Q: Is CD74ACT139MG4 available in different package types? A: Yes, CD74ACT139MG4 is available in various package types, such as SOIC, TSSOP, and PDIP, providing flexibility for different PCB layouts.

  9. Q: What are the typical applications of CD74ACT139MG4? A: CD74ACT139MG4 can be used in address decoding, data routing, memory selection, and other digital logic applications where demultiplexing is required.

  10. Q: Are there any special considerations when using CD74ACT139MG4? A: It is important to ensure proper power supply decoupling and signal integrity measures when using CD74ACT139MG4 to maintain reliable operation and minimize noise interference.

Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.