STMicroelectronics
Bild kan vara representation.
Se specifikationer för produktinformation.
TS925AIPT
Visa detalj Datablad

TS925AIPT

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Amplifier
  • Characteristics: Low-power, rail-to-rail input/output, single-supply voltage operation
  • Package: TSSOP-14
  • Essence: Operational amplifier
  • Packaging/Quantity: Tube packaging, 100 units per tube

Specifications

  • Supply Voltage: 2.7V to 5.5V
  • Input Offset Voltage: ±1mV (maximum)
  • Input Bias Current: ±0.5pA (typical)
  • Gain Bandwidth Product: 4MHz (typical)
  • Slew Rate: 2.3V/µs (typical)
  • Quiescent Current: 500µA (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The TS925AIPT has a TSSOP-14 package with the following pin configuration:

  1. Non-Inverting Input (+IN)
  2. Inverting Input (-IN)
  3. V-
  4. Output (OUT)
  5. Offset Null
  6. NC (No Connection)
  7. V+
  8. NC
  9. NC
  10. NC
  11. NC
  12. NC
  13. NC
  14. NC

Functional Features

  • Rail-to-rail input and output capability allows for maximum dynamic range.
  • Low-power consumption makes it suitable for battery-powered applications.
  • Single-supply voltage operation simplifies circuit design.
  • High gain bandwidth product enables accurate amplification of signals up to 4MHz.
  • Low input offset voltage ensures minimal distortion in amplified signals.

Advantages and Disadvantages

Advantages

  • Wide supply voltage range allows for flexibility in various applications.
  • Rail-to-rail input/output capability provides maximum signal range.
  • Low quiescent current minimizes power consumption.
  • Small package size (TSSOP-14) enables space-saving designs.

Disadvantages

  • Limited number of available pins may restrict the complexity of circuit designs.
  • Higher input bias current compared to some alternative models.

Working Principles

The TS925AIPT is an operational amplifier that amplifies the difference between its two input voltages. It operates on a single supply voltage and can handle signals that span the entire range from V- to V+. The rail-to-rail input/output capability ensures that the amplified output accurately represents the input signal, even when it approaches the supply rails.

Detailed Application Field Plans

The TS925AIPT is commonly used in various applications, including:

  1. Audio Amplification: It can be used to amplify audio signals in portable devices, headphones, and audio systems.
  2. Sensor Signal Conditioning: It is suitable for amplifying and conditioning signals from sensors such as temperature, pressure, and light sensors.
  3. Battery-Powered Systems: Its low-power consumption makes it ideal for use in battery-powered devices like wireless sensors and remote controls.
  4. Industrial Control Systems: It can be employed in industrial control systems for amplifying and processing analog signals.

Detailed and Complete Alternative Models

Some alternative models to the TS925AIPT include:

  1. LM358: Dual operational amplifier with similar characteristics and pin configuration.
  2. MCP6002: Low-power, rail-to-rail input/output operational amplifier.
  3. TLV2462: Precision, low-power operational amplifier with rail-to-rail input/output capability.

These alternative models offer similar functionality and can be considered based on specific application requirements.

Word count: 408 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av TS925AIPT i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of TS925AIPT in technical solutions:

  1. Q: What is TS925AIPT? A: TS925AIPT is a specific model of operational amplifier (op-amp) manufactured by STMicroelectronics.

  2. Q: What are the key features of TS925AIPT? A: The key features of TS925AIPT include low input offset voltage, low noise, rail-to-rail input/output capability, and low power consumption.

  3. Q: What is the typical voltage supply range for TS925AIPT? A: The typical voltage supply range for TS925AIPT is between 2.7V and 5.5V.

  4. Q: Can TS925AIPT be used in single-supply applications? A: Yes, TS925AIPT can be used in both single-supply and dual-supply applications.

  5. Q: What is the maximum output current of TS925AIPT? A: The maximum output current of TS925AIPT is typically around 60mA.

  6. Q: Is TS925AIPT suitable for low-power applications? A: Yes, TS925AIPT is designed for low-power applications and has a low quiescent current.

  7. Q: Can TS925AIPT operate at high temperatures? A: Yes, TS925AIPT has a wide temperature range and can operate reliably at high temperatures up to 125°C.

  8. Q: What are some typical applications of TS925AIPT? A: TS925AIPT is commonly used in battery-powered devices, portable audio equipment, sensor interfaces, and other low-power analog signal processing applications.

  9. Q: Does TS925AIPT have built-in protection features? A: Yes, TS925AIPT includes built-in protection features such as short-circuit and thermal shutdown protection.

  10. Q: Can TS925AIPT be used in precision measurement applications? A: While TS925AIPT offers good performance, it may not be suitable for high-precision measurement applications due to its limited input offset voltage specifications.

Please note that the answers provided here are general and may vary depending on specific datasheet information and application requirements.