STMicroelectronics
Bild kan vara representation.
Se specifikationer för produktinformation.
BTA26-800BWRG
Visa detalj Datablad

BTA26-800BWRG

Product Overview

The BTA26-800BWRG belongs to the category of high power triacs and is commonly used for controlling AC loads in various applications. This component exhibits characteristics such as high current capability, reliable performance, and robust packaging. It is typically available in a TO-220AB package and is an essential component for controlling AC power in electronic circuits.

Basic Information

  • Category: High Power Triac
  • Use: AC Load Control
  • Characteristics: High Current Capability, Reliable Performance
  • Package: TO-220AB
  • Packaging/Quantity: Standard Packaging, Quantity Varies

Specifications

The BTA26-800BWRG features the following specifications: - Maximum RMS On-State Current: 25A - Repetitive Peak Off-State Voltage: 800V - Gate Trigger Current: 50mA - Holding Current: 50mA - Critical Rate of Rise of Off-State Voltage: 50V/µs

Detailed Pin Configuration

The BTA26-800BWRG has a standard TO-220AB pin configuration with three pins: 1. Main Terminal 1 (MT1) 2. Main Terminal 2 (MT2) 3. Gate (G)

Functional Features

  • High Current Handling Capability
  • Reliable Turn-On and Turn-Off Performance
  • Suitable for AC Load Control Applications

Advantages and Disadvantages

Advantages

  • High Current Capability
  • Reliable Performance
  • Robust Packaging

Disadvantages

  • Sensitive to Overvoltage Conditions
  • Requires Proper Heat Dissipation

Working Principles

The BTA26-800BWRG operates based on the principle of controlling the flow of alternating current through its main terminals using the gate signal. When the gate trigger current is applied, the triac turns on and allows current to flow through it until the current drops below the holding current or the voltage across the device reverses.

Detailed Application Field Plans

The BTA26-800BWRG is widely used in the following application fields: - Dimmer Circuits - Motor Speed Control - Heating Control Systems

Detailed and Complete Alternative Models

Some alternative models to the BTA26-800BWRG include: - BTA24-800BW - BTA41-800BRG - BTA40-800B

In conclusion, the BTA26-800BWRG is a high power triac that offers reliable performance and high current handling capabilities, making it suitable for various AC load control applications.

Word Count: 345

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av BTA26-800BWRG i tekniska lösningar

  1. What is the BTA26-800BWRG?

    • The BTA26-800BWRG is a high voltage, high current Triac designed for general purpose AC switching and can be used in various technical solutions.

  2. What are the key specifications of the BTA26-800BWRG?

    • The BTA26-800BWRG has a maximum RMS on-state current of 25A, a repetitive peak off-state voltage of 800V, and a gate trigger current of 50mA.

  3. In what technical applications can the BTA26-800BWRG be used?

    • The BTA26-800BWRG can be used in applications such as motor control, lighting control, heating control, and power supplies.

  4. What are the recommended operating conditions for the BTA26-800BWRG?

    • The BTA26-800BWRG should be operated within a temperature range of -40°C to 125°C and with proper heat sinking for efficient thermal management.

  5. How does the BTA26-800BWRG handle overcurrent and overvoltage protection?

    • The BTA26-800BWRG can be used in conjunction with external circuitry such as fuses, varistors, and current-limiting resistors to provide overcurrent and overvoltage protection.

  6. What are the typical failure modes of the BTA26-800BWRG?

    • The BTA26-800BWRG may fail due to overcurrent, overvoltage, or excessive junction temperature. Proper protection and thermal management are essential to prevent these failures.

  7. Can the BTA26-800BWRG be used in both AC and DC applications?

    • No, the BTA26-800BWRG is specifically designed for AC switching applications and should not be used in DC circuits.

  8. What are the recommended PCB layout and mounting guidelines for the BTA26-800BWRG?

    • The BTA26-800BWRG should be mounted on a suitable heatsink and the PCB layout should minimize stray inductance and provide adequate creepage and clearance distances.

  9. Are there any specific considerations for driving the gate of the BTA26-800BWRG?

    • The gate of the BTA26-800BWRG should be driven with a sufficient gate current to ensure reliable turn-on and turn-off, and proper isolation techniques should be employed for safety and noise immunity.

  10. Where can I find detailed application notes and reference designs for the BTA26-800BWRG?

    • Detailed application notes and reference designs for the BTA26-800BWRG can be found in the product datasheet, technical documentation from the manufacturer, and application-specific technical forums and communities.