SMC Diode Solutions
Bild kan vara representation.
Se specifikationer för produktinformation.
P6KE75ATR
Visa detalj Datablad

P6KE75ATR - Product Overview and Analysis

Introduction

The P6KE75ATR is a transient voltage suppressor diode designed to protect electronic circuits from voltage spikes and transients. This entry provides a comprehensive overview of the P6KE75ATR, including its product category, basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Product Category and Use

The P6KE75ATR belongs to the category of transient voltage suppressor diodes. It is commonly used in electronic circuits to protect sensitive components from voltage surges and transients. The diode acts as a voltage clamping device, diverting excessive current away from the protected circuitry.

Characteristics

  • Package: DO-15
  • Essence: Transient voltage suppression
  • Packaging/Quantity: Tape & Reel (1000 units per reel)

Specifications

  • Peak Pulse Power: 600W
  • Breakdown Voltage: 64.3V to 71.3V
  • Operating Temperature: -55°C to +175°C
  • Reverse Standoff Voltage: 58.1V
  • Maximum Clamping Voltage: 92.0V
  • Peak Pulse Current: 9.2A

Detailed Pin Configuration

The P6KE75ATR features a standard DO-15 package with two leads. The anode and cathode terminals are clearly marked for easy identification.

Functional Features

  • Transient Suppression: Effectively clamps transient voltages to protect downstream components.
  • Fast Response Time: Rapidly responds to voltage spikes to prevent damage.
  • Low Leakage Current: Minimal leakage current ensures efficient operation.

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • Fast response time
  • Compact form factor

Disadvantages

  • Limited peak pulse power handling compared to higher-rated devices
  • Sensitive to prolonged overvoltage conditions

Working Principles

When a voltage transient occurs, the P6KE75ATR conducts current and clamps the voltage to a safe level, preventing damage to the connected circuitry. The diode's fast response time ensures that the transient is suppressed before it can cause harm.

Detailed Application Field Plans

The P6KE75ATR is widely used in various applications, including: - Power supply units - Communication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

  • P6KE6.8A: Lower breakdown voltage variant
  • P6KE100A: Higher breakdown voltage variant
  • 1.5KE75A: Similar performance in a different package

In conclusion, the P6KE75ATR transient voltage suppressor diode offers effective protection against voltage transients in a wide range of electronic applications. Its compact design, fast response time, and reliable performance make it a popular choice for circuit protection needs.

Word count: 455

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av P6KE75ATR i tekniska lösningar

  1. What is the P6KE75ATR?

    • The P6KE75ATR is a transient voltage suppressor diode designed to protect electronic circuits from voltage spikes and transients.

  2. What is the maximum peak pulse power of the P6KE75ATR?

    • The maximum peak pulse power of the P6KE75ATR is 600 watts.

  3. What is the breakdown voltage of the P6KE75ATR?

    • The breakdown voltage of the P6KE75ATR is 64.3 volts.

  4. What are the typical applications of the P6KE75ATR?

    • The P6KE75ATR is commonly used in surge protection for telecommunications equipment, industrial control systems, and automotive electronics.

  5. What is the operating temperature range of the P6KE75ATR?

    • The P6KE75ATR has an operating temperature range of -55°C to +175°C.

  6. What is the reverse stand-off voltage of the P6KE75ATR?

    • The reverse stand-off voltage of the P6KE75ATR is 75 volts.

  7. What is the response time of the P6KE75ATR?

    • The response time of the P6KE75ATR is very fast, typically in the nanosecond range.

  8. Is the P6KE75ATR RoHS compliant?

    • Yes, the P6KE75ATR is RoHS compliant, making it suitable for use in environmentally sensitive applications.

  9. Can the P6KE75ATR be used for ESD protection?

    • Yes, the P6KE75ATR can be used for electrostatic discharge (ESD) protection in sensitive electronic devices.

  10. What are the packaging options available for the P6KE75ATR?

    • The P6KE75ATR is available in various packaging options, including DO-15, SMA, and SMB packages, providing flexibility for different application requirements.