SMC Diode Solutions
Bild kan vara representation.
Se specifikationer för produktinformation.
MBRF10200CT
Visa detalj Datablad

MBRF10200CT

Introduction

The MBRF10200CT is a diode belonging to the category of Schottky rectifier diodes. This entry provides an overview of the basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models of the MBRF10200CT.

Basic Information Overview

  • Category: Schottky rectifier diode
  • Use: Used in power supply applications, reverse polarity protection, and low voltage drop diode applications.
  • Characteristics: High current capability, low forward voltage drop, fast switching speed.
  • Package: TO-220AB package
  • Essence: Schottky diode with high current handling capacity
  • Packaging/Quantity: Typically packaged in reels or tubes containing multiple units.

Specifications

  • Maximum Average Forward Current: 10A
  • Peak Repetitive Reverse Voltage: 200V
  • Forward Voltage Drop: Typically around 0.75V at 5A
  • Reverse Leakage Current: Maximum of 0.5mA at 200V
  • Operating Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The MBRF10200CT typically has three pins: 1. Anode (A) 2. Cathode (K) 3. Thermal pad (T)

Functional Features

  • High current carrying capability
  • Low forward voltage drop
  • Fast switching speed
  • Low reverse leakage current

Advantages and Disadvantages

Advantages

  • Low forward voltage drop reduces power dissipation
  • Fast switching speed allows for efficient operation in high-frequency circuits
  • High current capability enables use in power supply applications

Disadvantages

  • Higher cost compared to standard silicon rectifier diodes
  • Sensitive to overvoltage conditions

Working Principles

The MBRF10200CT operates based on the Schottky barrier principle, where the metal-semiconductor junction results in lower forward voltage drop compared to conventional PN-junction diodes. When a forward bias is applied, the diode conducts with minimal voltage drop, making it suitable for high-efficiency applications.

Detailed Application Field Plans

The MBRF10200CT finds applications in various fields including: - Power supply units - DC-DC converters - Reverse polarity protection circuits - Low voltage drop diode applications

Detailed and Complete Alternative Models

Some alternative models to the MBRF10200CT include: - MBRF1030CT - MBRF2040CT - MBRF3040CT - MBRF4040CT

In summary, the MBRF10200CT is a high-performance Schottky rectifier diode with applications in power supply and low voltage drop diode circuits. Its characteristics of high current capability, low forward voltage drop, and fast switching speed make it a preferred choice in various electronic applications.

[Word count: 398]

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av MBRF10200CT i tekniska lösningar

  1. What is MBRF10200CT?

    • MBRF10200CT is a Schottky barrier rectifier diode designed for high efficiency and low power loss in applications such as switch mode power supplies, free-wheeling diodes, and reverse battery protection.

  2. What is the maximum forward voltage drop of MBRF10200CT?

    • The maximum forward voltage drop of MBRF10200CT is typically 0.55V at 5A.

  3. What is the maximum reverse voltage of MBRF10200CT?

    • The maximum reverse voltage of MBRF10200CT is 200V.

  4. What are the typical applications of MBRF10200CT?

    • Typical applications of MBRF10200CT include DC-DC converters, output rectification, freewheeling diodes, and reverse polarity protection.

  5. What is the operating temperature range of MBRF10200CT?

    • The operating temperature range of MBRF10200CT is -65°C to +175°C.

  6. What is the forward surge current of MBRF10200CT?

    • The forward surge current of MBRF10200CT is 125A.

  7. What is the package type of MBRF10200CT?

    • MBRF10200CT comes in a TO-220AB package.

  8. What are the key features of MBRF10200CT?

    • Key features of MBRF10200CT include low forward voltage drop, high frequency operation, high junction temperature capability, and high reliability.

  9. What are the recommended storage conditions for MBRF10200CT?

    • It is recommended to store MBRF10200CT in an environment with a temperature range of -65°C to +175°C and a humidity level below 75%.

  10. What are the important considerations when designing with MBRF10200CT?

    • Important considerations when designing with MBRF10200CT include thermal management, proper PCB layout, and ensuring adequate derating of electrical parameters based on operating conditions.