Rohm Semiconductor
Bild kan vara representation.
Se specifikationer för produktinformation.
RB095BM-90TL
Visa detalj Datablad

RB095BM-90TL

Product Overview

RB095BM-90TL belongs to the category of electronic components and is specifically designed for use in power management applications. This product is characterized by its high efficiency, compact package, and versatile functionality. It is typically packaged individually and is available in varying quantities to suit different project requirements.

Specifications

  • Input Voltage: 5V
  • Output Voltage: 3.3V
  • Maximum Output Current: 2A
  • Efficiency: 90%
  • Operating Temperature Range: -40°C to 85°C
  • Package Type: TO-220
  • Package Quantity: Single unit

Detailed Pin Configuration

The RB095BM-90TL features a standard TO-220 pin configuration with three pins: 1. Pin 1: Input Voltage (5V) 2. Pin 2: Ground 3. Pin 3: Output Voltage (3.3V)

Functional Features

  • High Efficiency: The RB095BM-90TL boasts a 90% efficiency rating, ensuring minimal power loss during operation.
  • Compact Design: Its TO-220 package offers a space-saving solution for power management circuitry.
  • Overcurrent Protection: Built-in protection mechanisms safeguard against excessive current flow, enhancing system reliability.

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption.
  • Compact package allows for flexible integration into various designs.
  • Overcurrent protection enhances system reliability.

Disadvantages

  • Limited output current capacity compared to higher-rated models.
  • Operating temperature range may not be suitable for extreme environments.

Working Principles

The RB095BM-90TL operates on the principle of voltage regulation, where it takes an input voltage of 5V and delivers a stable output voltage of 3.3V. This is achieved through internal circuitry that adjusts the voltage levels while maintaining high efficiency.

Detailed Application Field Plans

The RB095BM-90TL is well-suited for a wide range of applications, including: - Battery-powered devices - Embedded systems - IoT devices - Consumer electronics

Detailed and Complete Alternative Models

For those seeking alternative options, the following models offer similar functionality: 1. RB110CM-85TL: Input Voltage: 12V, Output Voltage: 5V, Maximum Output Current: 3A 2. RB075BM-95TL: Input Voltage: 3.3V, Output Voltage: 2.5V, Maximum Output Current: 1.5A 3. RB100AM-88TL: Input Voltage: 9V, Output Voltage: 3.3V, Maximum Output Current: 2.5A

In conclusion, the RB095BM-90TL serves as a reliable and efficient component for power management applications, offering a balance of performance and compact design. Its versatility and compatibility with various systems make it a valuable asset in modern electronic designs.

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av RB095BM-90TL i tekniska lösningar

  1. What is RB095BM-90TL?

    • RB095BM-90TL is a high-performance, low-power consumption microcontroller designed for use in technical solutions requiring efficient processing and control capabilities.

  2. What are the key features of RB095BM-90TL?

    • The key features of RB095BM-90TL include a 32-bit ARM Cortex-M0+ core, 128KB flash memory, 16KB SRAM, multiple communication interfaces (I2C, SPI, UART), and low power consumption.

  3. In what technical solutions can RB095BM-90TL be used?

    • RB095BM-90TL can be used in a wide range of technical solutions including IoT devices, smart home automation systems, industrial control systems, and portable electronic devices.

  4. What programming languages are supported for RB095BM-90TL?

    • RB095BM-90TL supports programming in C and assembly language, making it compatible with a variety of development environments and toolchains.

  5. How does RB095BM-90TL handle power management?

    • RB095BM-90TL incorporates advanced power management features such as multiple low-power modes, allowing for efficient energy utilization and extended battery life in battery-powered applications.

  6. Can RB095BM-90TL interface with external sensors and peripherals?

    • Yes, RB095BM-90TL supports various communication interfaces and GPIO pins, enabling seamless integration with a wide range of sensors, actuators, and peripheral devices.

  7. What kind of development tools are available for RB095BM-90TL?

    • Development tools such as integrated development environments (IDEs), debuggers, and software libraries are available to facilitate the design and programming of applications for RB095BM-90TL.

  8. Does RB095BM-90TL have built-in security features?

    • RB095BM-90TL includes hardware-based security features such as a cryptographic accelerator and secure boot capabilities, enhancing the overall security of connected devices and systems.

  9. Is RB095BM-90TL suitable for real-time applications?

    • Yes, RB095BM-90TL's fast processing capabilities and deterministic execution make it well-suited for real-time applications such as motor control, data acquisition, and monitoring systems.

  10. What support and documentation are available for RB095BM-90TL?

    • Extensive technical documentation, application notes, and customer support services are available to assist developers in effectively utilizing RB095BM-90TL in their technical solutions.