Rohm Semiconductor
Bild kan vara representation.
Se specifikationer för produktinformation.
BM92T20MWV-ZE2
Visa detalj Datablad

BM92T20MWV-ZE2

Product Overview

  • Category: Integrated Circuit
  • Use: Power Management IC
  • Characteristics:
    • High efficiency
    • Low power consumption
    • Compact size
  • Package: QFN (Quad Flat No-leads)
  • Essence: Power management solution for electronic devices
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 24V
  • Output Voltage Range: 0.8V to 5.5V
  • Maximum Output Current: 2A
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to 85°C
  • Package Dimensions: 3mm x 3mm x 0.9mm

Detailed Pin Configuration

The BM92T20MWV-ZE2 has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. PG: Power good indicator pin
  5. VOUT: Output voltage pin

Functional Features

  • Wide input voltage range allows compatibility with various power sources
  • High efficiency ensures minimal power loss during conversion
  • Low power consumption in standby mode prolongs battery life
  • Enable pin provides control over the device's operation
  • Power good indicator pin signals when the output voltage is within the desired range

Advantages and Disadvantages

Advantages: - High efficiency leads to energy savings - Compact size enables integration into space-constrained designs - Wide input voltage range enhances versatility - Power good indicator improves system reliability

Disadvantages: - Limited maximum output current may not be suitable for high-power applications - Operating temperature range may restrict usage in extreme environments

Working Principles

The BM92T20MWV-ZE2 is a power management IC that regulates the input voltage to provide a stable output voltage for electronic devices. It utilizes a switching regulator topology to achieve high efficiency. The device continuously monitors the input and output voltages, adjusting its internal circuitry to maintain the desired output voltage within the specified range.

Detailed Application Field Plans

The BM92T20MWV-ZE2 is commonly used in various applications, including:

  1. Mobile devices: Smartphones, tablets, and portable media players
  2. IoT devices: Wearables, smart home devices, and connected sensors
  3. Industrial equipment: Control systems, measurement instruments, and automation devices
  4. Automotive electronics: Infotainment systems, navigation units, and advanced driver-assistance systems

Detailed and Complete Alternative Models

  1. BM92T10MWV-ZE2: Similar specifications but with a maximum output current of 1A
  2. BM92T30MWV-ZE2: Similar specifications but with a maximum output current of 3A
  3. BM92T40MWV-ZE2: Similar specifications but with a maximum output current of 4A
  4. BM92T50MWV-ZE2: Similar specifications but with a maximum output current of 5A

These alternative models offer different maximum output currents to cater to varying power requirements.

Word count: 314 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av BM92T20MWV-ZE2 i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of BM92T20MWV-ZE2 in technical solutions:

1. What is the BM92T20MWV-ZE2? - The BM92T20MWV-ZE2 is a power management IC (PMIC) designed for use in various technical solutions.

2. What are the key features of the BM92T20MWV-ZE2? - The key features of the BM92T20MWV-ZE2 include multiple voltage regulators, battery charging capabilities, protection circuitry, and communication interfaces.

3. What technical solutions can benefit from using the BM92T20MWV-ZE2? - The BM92T20MWV-ZE2 can be used in a wide range of applications such as portable devices, IoT devices, industrial equipment, and automotive systems.

4. How many voltage regulators does the BM92T20MWV-ZE2 have? - The BM92T20MWV-ZE2 has multiple voltage regulators, typically including buck converters, boost converters, and LDOs (low-dropout regulators).

5. Can the BM92T20MWV-ZE2 charge batteries? - Yes, the BM92T20MWV-ZE2 has built-in battery charging capabilities, making it suitable for applications that require battery-powered operation.

6. What protection features does the BM92T20MWV-ZE2 offer? - The BM92T20MWV-ZE2 provides protection against overvoltage, undervoltage, overcurrent, and overtemperature conditions, ensuring safe and reliable operation.

7. What communication interfaces are supported by the BM92T20MWV-ZE2? - The BM92T20MWV-ZE2 supports various communication interfaces such as I2C (Inter-Integrated Circuit) and SMBus (System Management Bus).

8. Can the BM92T20MWV-ZE2 be used in automotive applications? - Yes, the BM92T20MWV-ZE2 is suitable for automotive applications, thanks to its robust design, wide operating temperature range, and automotive-grade certifications.

9. Is there any evaluation or development kit available for the BM92T20MWV-ZE2? - Yes, the manufacturer of the BM92T20MWV-ZE2 typically provides evaluation kits and development tools to aid in the design and testing process.

10. Where can I find more information about the BM92T20MWV-ZE2? - You can refer to the datasheet, application notes, and technical documentation provided by the manufacturer of the BM92T20MWV-ZE2 for detailed information on its specifications, usage, and application examples.

Please note that the specific details and answers may vary depending on the manufacturer and the product's documentation.