Power Integrations
Bild kan vara representation.
Se specifikationer för produktinformation.
LNK563GN
Visa detalj Datablad

LNK563GN

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management IC

Characteristics: - High efficiency - Low standby power consumption - Wide input voltage range - Over-temperature protection - Over-voltage protection - Over-current protection

Package: DIP-7 (Dual In-line Package 7 pins)

Essence: LNK563GN is a power management IC designed to provide efficient and reliable power supply solutions for various electronic devices.

Packaging/Quantity: The LNK563GN is typically packaged in reels containing 2500 units per reel.

Specifications

  • Input Voltage Range: 85V AC to 265V AC
  • Output Voltage: 5V DC
  • Output Current: Up to 1A
  • Efficiency: >80%
  • Standby Power Consumption: <100mW
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The LNK563GN features the following pin configuration:

  1. VDD: Power supply input
  2. BP/M: Bypass/Multifunction pin
  3. FB: Feedback pin
  4. GND: Ground
  5. D: Drain pin
  6. S: Source pin
  7. NC: No connection

Functional Features

  • Primary-side control eliminates the need for an optocoupler
  • Auto-restart protection for fault conditions
  • Frequency jittering reduces EMI emissions
  • Built-in thermal shutdown protection
  • Cycle-by-cycle current limit

Advantages and Disadvantages

Advantages: - High efficiency leads to energy savings - Wide input voltage range allows for universal compatibility - Over-temperature, over-voltage, and over-current protection ensure device safety - Simplified circuit design due to primary-side control

Disadvantages: - Limited output current capacity (up to 1A) - Requires external components for complete power supply solution

Working Principles

The LNK563GN utilizes primary-side control to regulate the output voltage. It operates by sensing the feedback signal from the FB pin and adjusting the duty cycle of the internal switch accordingly. This approach eliminates the need for an optocoupler, reducing cost and complexity.

The IC incorporates various protection features such as over-temperature, over-voltage, and over-current protection. In case of a fault condition, the device enters auto-restart mode to ensure continuous operation.

Detailed Application Field Plans

The LNK563GN is widely used in applications requiring efficient power management, such as:

  1. Consumer electronics
  2. LED lighting systems
  3. Industrial automation
  4. Home appliances
  5. Power adapters

Detailed and Complete Alternative Models

  1. LNK562GN: Similar specifications and features, but with a lower output current capacity of 500mA.
  2. LNK564GN: Similar specifications and features, but with a higher output current capacity of 1.5A.
  3. LNK565GN: Similar specifications and features, but with a higher output voltage of 12V DC.

These alternative models provide flexibility in choosing the appropriate power management IC based on specific application requirements.

Word count: 410

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av LNK563GN i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of LNK563GN in technical solutions:

  1. Q: What is LNK563GN? A: LNK563GN is a highly efficient, low-power integrated circuit (IC) that combines a primary-side regulated flyback switcher with a secondary-side synchronous rectifier.

  2. Q: What are the typical applications of LNK563GN? A: LNK563GN is commonly used in various technical solutions such as power supplies for appliances, LED lighting, industrial controls, and IoT devices.

  3. Q: What is the advantage of using LNK563GN in power supply designs? A: LNK563GN offers several advantages including high efficiency, low standby power consumption, compact size, and simplified design due to its integrated features.

  4. Q: Can LNK563GN handle different input voltage ranges? A: Yes, LNK563GN can operate over a wide input voltage range, typically from 85VAC to 265VAC, making it suitable for global applications.

  5. Q: Does LNK563GN provide protection features? A: Yes, LNK563GN incorporates various protection features like output overvoltage protection, output short-circuit protection, and thermal shutdown to ensure safe operation.

  6. Q: How does LNK563GN achieve high efficiency? A: LNK563GN utilizes advanced control techniques like frequency jittering, cycle-by-cycle current limit, and valley switching to achieve high efficiency across different load conditions.

  7. Q: Can LNK563GN support dimming functionality for LED lighting applications? A: Yes, LNK563GN supports both analog and digital dimming methods, allowing for easy integration into LED lighting systems with dimming requirements.

  8. Q: Is LNK563GN compliant with safety standards? A: Yes, LNK563GN is designed to meet various safety standards such as UL, CE, and IEC, ensuring reliable and safe operation in different applications.

  9. Q: Can LNK563GN operate in a wide temperature range? A: Yes, LNK563GN has a wide operating temperature range of -40°C to +150°C, making it suitable for use in harsh environments.

  10. Q: Are there any reference designs available for LNK563GN? A: Yes, the manufacturer provides reference designs and application notes that can help engineers in implementing LNK563GN in their technical solutions.

Please note that the answers provided here are general and may vary depending on specific product documentation and application requirements.