Power Integrations
Bild kan vara representation.
Se specifikationer för produktinformation.
LNK354P
Visa detalj Datablad

LNK354P

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management IC

Characteristics: - Low power consumption - High efficiency - Wide input voltage range - Over-temperature protection - Over-voltage protection - Short-circuit protection

Package: DIP-8 (Dual In-line Package, 8 pins)

Essence: LNK354P is a power management IC designed for efficient power conversion and regulation.

Packaging/Quantity: The LNK354P is typically sold in reels of 2500 units.

Specifications

  • Input Voltage Range: 85V AC to 265V AC
  • Output Voltage: 5V DC
  • Output Current: Up to 200mA
  • Operating Temperature Range: -40°C to +150°C
  • Efficiency: Up to 90%
  • Standby Power Consumption: Less than 100mW

Detailed Pin Configuration

The LNK354P has the following pin configuration:

  1. VDD: Power supply input
  2. GND: Ground reference
  3. FB: Feedback pin for output voltage regulation
  4. BP: Bypass pin for frequency jittering
  5. DRAIN: High-voltage power MOSFET drain connection
  6. SOURCE: High-voltage power MOSFET source connection
  7. VCC: Supply voltage for internal control circuitry
  8. NC: No connection

Functional Features

  • Primary-side control eliminates the need for an optocoupler or secondary-side feedback components.
  • Auto-restart protection feature ensures continuous operation even in the event of a fault condition.
  • Frequency jittering reduces EMI emissions.
  • Built-in over-temperature, over-voltage, and short-circuit protection enhance system reliability.
  • Green-mode power-saving operation improves efficiency at light loads.

Advantages and Disadvantages

Advantages: - Integrated primary-side control simplifies circuit design. - High efficiency reduces power consumption. - Wide input voltage range allows for universal compatibility. - Comprehensive protection features enhance system reliability. - Green-mode operation improves energy efficiency.

Disadvantages: - Limited output current may not be suitable for high-power applications. - DIP-8 package may require additional space compared to smaller packages.

Working Principles

The LNK354P utilizes primary-side control, where the feedback signal is derived from the primary side of the power transformer. This eliminates the need for an optocoupler or secondary-side feedback components, reducing cost and complexity. The IC regulates the output voltage by adjusting the duty cycle of the internal power MOSFET based on the feedback signal.

The device operates in a quasi-resonant mode, which minimizes switching losses and improves overall efficiency. Frequency jittering is employed to reduce electromagnetic interference (EMI) emissions.

Detailed Application Field Plans

The LNK354P is commonly used in various low-power applications, including but not limited to: - Power adapters - Battery chargers - LED lighting - Home appliances - Industrial controls

Detailed and Complete Alternative Models

  1. LNK352P: Similar functionality with lower output current capability.
  2. LNK353P: Similar functionality with higher output current capability.
  3. LNK355P: Similar functionality with additional protection features.

These alternative models provide flexibility in choosing the appropriate IC based on specific application requirements.

In conclusion, the LNK354P is a power management IC designed for efficient power conversion and regulation. Its primary-side control, comprehensive protection features, and wide input voltage range make it suitable for various low-power applications. While it has limitations in terms of output current and package size, alternative models offer different specifications to cater to diverse needs.

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av LNK354P i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of LNK354P in technical solutions:

  1. Q: What is LNK354P? A: LNK354P is a highly integrated, offline switcher IC designed for low-power applications.

  2. Q: What are the key features of LNK354P? A: LNK354P features include primary-side regulation, high efficiency, accurate constant current control, and built-in protection features.

  3. Q: What are the typical applications of LNK354P? A: LNK354P is commonly used in LED lighting, smart home devices, industrial controls, and other low-power applications.

  4. Q: How does LNK354P achieve primary-side regulation? A: LNK354P uses a proprietary technology called EcoSmart™ to provide accurate output voltage regulation without the need for an optocoupler or secondary feedback circuitry.

  5. Q: Can LNK354P operate in a wide input voltage range? A: Yes, LNK354P can operate in a wide input voltage range, typically from 85VAC to 265VAC.

  6. Q: Does LNK354P support dimming functionality for LED lighting? A: Yes, LNK354P supports both analog and PWM dimming methods for LED lighting applications.

  7. Q: What are the advantages of using LNK354P in LED lighting designs? A: LNK354P offers high efficiency, excellent line and load regulation, and built-in protection features such as over-temperature and over-voltage protection.

  8. Q: Is LNK354P suitable for battery-powered applications? A: No, LNK354P is primarily designed for offline AC-DC power supplies and is not suitable for battery-powered applications.

  9. Q: Can LNK354P be used in high-power applications? A: No, LNK354P is optimized for low-power applications and has a maximum output power rating of around 10 watts.

  10. Q: Are there any reference designs available for LNK354P? A: Yes, Power Integrations provides various reference designs and application notes that can help engineers implement LNK354P in their designs effectively.

Please note that the answers provided here are general and may vary depending on specific design requirements and application scenarios.