Panasonic Electronic Components
Bild kan vara representation.
Se specifikationer för produktinformation.
PNA4601M00LC
Visa detalj Datablad

PNA4601M00LC

Introduction

The PNA4601M00LC is a versatile infrared receiver module designed for various applications. This entry provides an in-depth overview of the product, including its category, use, characteristics, package, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Infrared Receiver Module
  • Use: Remote control systems, IR data transmission
  • Characteristics: High sensitivity, wide operating voltage range, compact size
  • Package: Through-hole
  • Essence: Efficient reception of infrared signals
  • Packaging/Quantity: Bulk packaging, quantity varies by supplier

Specifications

  • Operating Voltage: 2.5V to 5.5V
  • Carrier Frequency: 38kHz
  • Peak Wavelength: 940nm
  • Supply Current: 350μA
  • Output Voltage: 0.4V (min) at 100μA, 3.3V (max) at 5mA
  • Operating Temperature: -25°C to 85°C

Detailed Pin Configuration

  1. VOUT - Output Voltage
  2. GND - Ground
  3. VS - Supply Voltage
  4. NC - No Connection
  5. OUT - Signal Output

Functional Features

  • High sensitivity to infrared signals
  • Wide operating voltage range for flexibility
  • Compact design for easy integration into various devices
  • Reliable signal output for accurate data reception

Advantages and Disadvantages

Advantages

  • High sensitivity enables reliable signal reception
  • Wide operating voltage range allows for versatile applications
  • Compact size facilitates easy integration into different products

Disadvantages

  • Limited to specific carrier frequency (38kHz)
  • Sensitivity may lead to interference from ambient infrared sources

Working Principles

The PNA4601M00LC operates based on the principle of detecting modulated infrared signals at a carrier frequency of 38kHz. When exposed to infrared radiation at this frequency, the module generates a corresponding output signal, making it suitable for remote control systems and IR data transmission applications.

Detailed Application Field Plans

  1. Remote Control Systems: The module can be integrated into various consumer electronics such as TVs, air conditioners, and audio systems to receive commands from remote controls.
  2. IR Data Transmission: It can be used in data communication systems where infrared signals are utilized for short-range data transfer, such as in industrial automation and smart home devices.

Detailed and Complete Alternative Models

  1. TSOP38238 - Similar operating characteristics with a different pinout
  2. TSOP4840 - Higher sensitivity and wider operating voltage range
  3. TSMP58000 - SMD package alternative with similar performance

In conclusion, the PNA4601M00LC infrared receiver module offers high sensitivity and a wide operating voltage range, making it suitable for various remote control and IR data transmission applications. Its compact design and reliable performance make it a popular choice for integration into consumer electronics and industrial systems.

[Word count: 498]

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av PNA4601M00LC i tekniska lösningar

  1. What is the PNA4601M00LC?

    • The PNA4601M00LC is an infrared receiver module commonly used in remote control applications.

  2. What are the key features of the PNA4601M00LC?

    • The PNA4601M00LC features a high sensitivity, wide operating voltage range, and compatibility with various carrier frequencies.

  3. How do I connect the PNA4601M00LC to a microcontroller?

    • The PNA4601M00LC can be connected to a microcontroller using its output pin and providing power within the specified voltage range.

  4. What is the typical operating distance of the PNA4601M00LC?

    • The typical operating distance of the PNA4601M00LC is around 10 meters, depending on the specific application and environmental conditions.

  5. Can the PNA4601M00LC work with different remote control protocols?

    • Yes, the PNA4601M00LC is compatible with various remote control protocols and carrier frequencies, making it versatile for different applications.

  6. What are the recommended operating conditions for the PNA4601M00LC?

    • The recommended operating voltage is typically between 2.7V to 5.5V, and the ambient temperature should be within the specified range for optimal performance.

  7. How can I test the functionality of the PNA4601M00LC?

    • You can test the functionality of the PNA4601M00LC by using a remote control transmitter and verifying that the module receives and processes the signals correctly.

  8. Are there any specific design considerations when integrating the PNA4601M00LC into a circuit?

    • It's important to consider proper decoupling, noise immunity, and placement of the module to ensure reliable operation within the intended application.

  9. Can the PNA4601M00LC be used in battery-powered devices?

    • Yes, the low power consumption of the PNA4601M00LC makes it suitable for use in battery-powered devices such as remote controls and other portable electronics.

  10. Where can I find detailed technical specifications and application notes for the PNA4601M00LC?

    • Detailed technical specifications and application notes for the PNA4601M00LC can be found in the manufacturer's datasheet and product documentation.