ON Semiconductor
Bild kan vara representation.
Se specifikationer för produktinformation.
NCV5106ADR2G
Visa detalj Datablad

NCV5106ADR2G

Product Overview

Category: Integrated Circuit (IC)

Use: Voltage Regulator

Characteristics: - Low dropout voltage - High output current capability - Adjustable output voltage - Thermal shutdown protection - Overcurrent protection - Reverse polarity protection

Package: DPAK (TO-252), 3-pin package

Essence: The NCV5106ADR2G is a voltage regulator IC designed to provide a stable and regulated output voltage for various electronic devices.

Packaging/Quantity: The NCV5106ADR2G is available in tape and reel packaging, with 2,500 units per reel.

Specifications

  • Input Voltage Range: 4.5V to 40V
  • Output Voltage Range: 1.25V to 37V
  • Output Current: Up to 1.5A
  • Dropout Voltage: 0.5V typical at 1A load
  • Quiescent Current: 10mA typical
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The NCV5106ADR2G has three pins:

  1. VIN (Pin 1): Input voltage pin. Connects to the positive terminal of the power supply.
  2. VOUT (Pin 2): Output voltage pin. Connects to the load or device requiring a regulated voltage.
  3. GND (Pin 3): Ground pin. Connects to the negative terminal of the power supply and the load/device ground.

Functional Features

  • Low Dropout Voltage: The NCV5106ADR2G has a low dropout voltage, allowing it to regulate the output voltage even when the input voltage is close to the desired output voltage.
  • High Output Current Capability: With a maximum output current of 1.5A, the IC can power a wide range of electronic devices.
  • Adjustable Output Voltage: The output voltage can be adjusted using external resistors, providing flexibility in meeting specific voltage requirements.
  • Thermal Shutdown Protection: The IC includes thermal shutdown protection to prevent damage due to excessive heat.
  • Overcurrent Protection: It incorporates overcurrent protection to safeguard against excessive current flow.
  • Reverse Polarity Protection: The NCV5106ADR2G is designed with reverse polarity protection to prevent damage caused by incorrect connection.

Advantages and Disadvantages

Advantages: - Wide input voltage range - Adjustable output voltage - High output current capability - Thermal and overcurrent protection - Reverse polarity protection

Disadvantages: - Dropout voltage may affect efficiency in low input voltage scenarios - Limited maximum output current compared to some other voltage regulators

Working Principles

The NCV5106ADR2G operates as a linear voltage regulator. It regulates the output voltage by maintaining a constant voltage drop across its internal pass transistor. When the input voltage exceeds the desired output voltage, the pass transistor adjusts its resistance to maintain a stable output voltage. The IC continuously monitors the output voltage and adjusts the pass transistor accordingly.

Detailed Application Field Plans

The NCV5106ADR2G is commonly used in various applications, including: - Automotive electronics - Industrial control systems - Power supplies - Battery-powered devices - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the NCV5106ADR2G include: - LM317: Adjustable voltage regulator with a wide input voltage range and high output current capability. - LT1084: Low dropout voltage regulator with adjustable output voltage and high output current capability. - LM1117: Fixed voltage regulator with low dropout voltage and high output current capability.

These alternative models can be considered based on specific requirements and design constraints.

Word count: 400 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av NCV5106ADR2G i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of NCV5106ADR2G in technical solutions:

  1. Question: What is NCV5106ADR2G?
    Answer: NCV5106ADR2G is a voltage regulator IC (integrated circuit) designed for automotive applications.

  2. Question: What is the input voltage range of NCV5106ADR2G?
    Answer: The input voltage range of NCV5106ADR2G is typically between 4.5V and 40V.

  3. Question: What is the output voltage range of NCV5106ADR2G?
    Answer: The output voltage range of NCV5106ADR2G is adjustable, but it can typically provide a regulated output voltage between 0.8V and 36V.

  4. Question: What is the maximum output current of NCV5106ADR2G?
    Answer: The maximum output current of NCV5106ADR2G is typically around 1A.

  5. Question: Can NCV5106ADR2G handle automotive load dump conditions?
    Answer: Yes, NCV5106ADR2G is designed to withstand automotive load dump conditions up to 45V.

  6. Question: Does NCV5106ADR2G have built-in protection features?
    Answer: Yes, NCV5106ADR2G includes various protection features such as overcurrent protection, thermal shutdown, and reverse battery protection.

  7. Question: Is NCV5106ADR2G suitable for use in harsh environments?
    Answer: Yes, NCV5106ADR2G is designed to operate reliably in harsh automotive environments, including high temperatures and vibrations.

  8. Question: Can NCV5106ADR2G be used in both step-up and step-down voltage regulation applications?
    Answer: Yes, NCV5106ADR2G can be used in both step-up (boost) and step-down (buck) voltage regulation applications.

  9. Question: What is the typical efficiency of NCV5106ADR2G?
    Answer: The typical efficiency of NCV5106ADR2G depends on the input and output voltage levels, but it can reach up to 90%.

  10. Question: Are there any application notes or reference designs available for NCV5106ADR2G?
    Answer: Yes, the manufacturer provides application notes and reference designs that can help with the implementation of NCV5106ADR2G in various technical solutions.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.