ON Semiconductor
Bild kan vara representation.
Se specifikationer för produktinformation.
NCP5338MNR2G
Visa detalj Datablad

NCP5338MNR2G

Product Overview

Category

NCP5338MNR2G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection

Package

NCP5338MNR2G comes in a small outline package (SOP) with a specified pin configuration.

Essence

The essence of NCP5338MNR2G lies in its ability to provide stable and regulated voltage to electronic devices, ensuring their proper functioning.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to VIN
  • Maximum Output Current: 3A
  • Dropout Voltage: 200mV at 1A
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

NCP5338MNR2G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. VOUT (Output Voltage)

Functional Features

  • High Efficiency: The NCP5338MNR2G offers high efficiency, minimizing power loss during voltage regulation.
  • Low Dropout Voltage: With a low dropout voltage, this regulator can maintain a stable output even when the input voltage is close to the desired output voltage.
  • Wide Input Voltage Range: It can accept a wide range of input voltages, making it suitable for various applications.
  • Adjustable Output Voltage: The output voltage can be adjusted within a specified range to meet specific requirements.
  • Overcurrent Protection: The NCP5338MNR2G incorporates overcurrent protection, safeguarding the circuit from excessive current flow.
  • Thermal Shutdown Protection: In case of excessive temperature, the regulator automatically shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • High efficiency ensures minimal power loss.
  • Wide input voltage range allows for versatile applications.
  • Adjustable output voltage meets specific requirements.
  • Overcurrent and thermal shutdown protection enhance reliability.

Disadvantages

  • Limited maximum output current (3A).
  • Dropout voltage may affect performance in low input voltage scenarios.

Working Principles

NCP5338MNR2G operates based on the principle of feedback control. It compares the actual output voltage with the desired voltage and adjusts the internal circuitry accordingly to maintain a stable output.

Detailed Application Field Plans

NCP5338MNR2G finds applications in various fields, including but not limited to: - Mobile devices - Portable electronics - Battery-powered systems - IoT devices - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to NCP5338MNR2G are: - LM1117-ADJ - LT1084CP-ADJ - TPS7A4700RGWT - ADP3339AKCZ-5.0-R7

These models can be considered as alternatives depending on specific requirements and constraints.

Word count: 345 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av NCP5338MNR2G i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of NCP5338MNR2G in technical solutions:

  1. Q: What is NCP5338MNR2G? A: NCP5338MNR2G is a voltage regulator IC (integrated circuit) designed for power management applications.

  2. Q: What is the input voltage range of NCP5338MNR2G? A: The input voltage range of NCP5338MNR2G is typically between 4.5V and 28V.

  3. Q: What is the output voltage range of NCP5338MNR2G? A: The output voltage range of NCP5338MNR2G can be adjusted from 0.6V to 5.5V.

  4. Q: What is the maximum output current of NCP5338MNR2G? A: The maximum output current of NCP5338MNR2G is typically around 3A.

  5. Q: Does NCP5338MNR2G have built-in protection features? A: Yes, NCP5338MNR2G includes various protection features such as overcurrent protection, thermal shutdown, and undervoltage lockout.

  6. Q: Can NCP5338MNR2G operate in a wide temperature range? A: Yes, NCP5338MNR2G is designed to operate in a temperature range of -40°C to +125°C.

  7. Q: Is NCP5338MNR2G suitable for battery-powered applications? A: Yes, NCP5338MNR2G is suitable for battery-powered applications due to its low quiescent current and high efficiency.

  8. Q: Can NCP5338MNR2G be used in automotive applications? A: Yes, NCP5338MNR2G is AEC-Q100 qualified and can be used in automotive applications.

  9. Q: Does NCP5338MNR2G require any external components for operation? A: Yes, NCP5338MNR2G requires a few external components such as input/output capacitors and resistors for voltage setting.

  10. Q: What are the typical applications of NCP5338MNR2G? A: NCP5338MNR2G is commonly used in various applications including industrial equipment, telecommunications, consumer electronics, and automotive systems for power management and voltage regulation purposes.

Please note that the answers provided here are general and may vary depending on specific design requirements and application scenarios.